Sony LCD TV KDL-55EX645 User Manual

21
Getting Started
Bundling the cables
Before bundling the cables, remove the cable holder from the AC cover. Reuse the 
cable holder to bundle the other cables.
 Do not bundle the AC power cord together with other cables.
* When installing on the wall, attach the cable holder under the terminals.
* 

22
Running Initial Setup
During initial setup, you will perform the following:
 Set the language for the On Screen Display (OSD) text
 Choose your viewing country
 Select the type of use
 Scan for digital and analog channels
 Set the current time
 Set the network setup
 Download the software
Complete your cable connections before beginning the Initial Setup. Refer to the Quick 
Setup Guide (supplied) for sample connection diagrams.
2Use the remote control buttons described below to navigate through the...

23
Getting Started
 If you cancel the Auto Program, any channels you have 
selected are not registered. To rescan for available 
channels, run Auto Program.
 Connect either your cable or antenna to the TV (you can 
connect both using an A-B RF switch (not supplied)); for 
more details see page 13.
 When promoted to select Retail or Home, be sure to 
select Home for ENERGY STAR compliant mode.
4Set the current date and time.
Please select the type of use for this TV.
 Home optimizes the picture for normal...

24
Operating the TV
Using the Remote Control
To Insert Batteries into the Remote Control
Insert two size AAA batteries (supplied) by matching e and E on the batteries to the 
diagram inside the battery compartment of the remote control.
Guidelines to follow
 Point your remote control directly at the IR sensor 
located on your TV.
 Make sure that no objects are blocking the path 
between the remote control and the IR sensor on your 
TV.
 Fluorescent lamps can interfere with your remote 
control; try...

25
Operating the TV
Remote Control Button Description
 The 5, N and CH + buttons have a tactile dot. Use them as a reference when operating the TV.
ButtonDescription
1INPUTPress to display the list of External Inputs and TV 
mode. Press repeatedly to toggle through the 
inputs. See page 35.
2WIDEPress repeatedly to cycle through the available 
Wide Mode settings. See page 33.
3Equipment 
ControlThese buttons are used to control the equipment 
connected to the TV by using the Control for 
HDMI function...

26
 When you set Scene Select to Photo, Music, Cinema, Game or Sports, Sound Mode is 
automatically set to Standard.
 The scene select function is not compliant with USB/DLNA-Photo, -Music, -Video, IPTV, Yahoo! 
Widgets and Internet Browser.
ButtonDescription
5PHOTO 
FRAMEPress to display the Photo Frame. See page 39.
6SCENEOptimizes picture and sound quality by selecting 
the following items.
Auto: Automatically optimizes picture and sound 
quality according to the input source.
General: No optimized...

27
Operating the TV
ButtonDescription
qgSYNC 
MENUPress to display the BRAVIA Sync Menu and then 
select connected HDMI equipment from 
HDMI 
Device Selection.
qhSENEnables selection of content from the online 
service “SEN” (Sony Entertainment Network). If 
“SEN” is unavailable, the “SEN” category is not 
displayed.
qjDISPLAYPress once to display the banner with channel/
program information you are watching. The 
banner will time out in a few seconds or press 
again to exit.
qkV/v/B/bPress V/v/B/b to...

28
TV Controls and Indicators
ItemDescription
1Light sensor
(IR) Infrared 
ReceiverSenses room light level and adjusts the screen brightness accordingly. Do not 
put anything over the sensor, doing so may affect its function.
Receives IR signal from the remote control.
2 (Picture 
Off)/  
(Timer) LEDLights up in orange when the On Timer/Sleep Timer/Photo Frame is set. If 
you set to On Timer, lights up in orange while the TV is also in standby mode.
Lights up in green when the Power Saving is set to...

29
Operating the TV
 For more information about setting up the external inputs labels, see page 62. 
 The CH + button has a tactile dot. Use it as a reference when operating the TV. 
 Make sure that the TV is completely switched off before unplugging the power cord. 

30
Using Features
BRAVIA® Sync™ with 
Control for HDMI
With the Control for HDMI function, 
BRAVIA Sync helps to communicate with 
BRAVIA Sync-compatible equipment 
using HDMI CEC (Consumer Electronics 
Control). Use the following settings and 
tips to help unify control of your 
connected equipment.
1Press HOME and select Settings, 
then select the Setup settings.
2Select the HDMI Settings, then 
highlight Control for HDMI, and set to 
On.
xControlling BRAVIA Sync-
Compatible Equipment
To control the...