Sony Klv 22s570as Operating Instructions
Have a look at the manual Sony Klv 22s570as Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 GB Using MENU Functions KLV-22S570A 4-142-343-11(1) PC Input Signal Reference Chart for supported signals and “Resolution:” value displayed This TV’s PC input does not support Sync on Green or Composite Sync. This TV’s PC input does not support interlaced signals. If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according to your settings. z For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. Signals Horizontal (Pixel) Vertical (Line)Horizontal frequency (kHz)Vertical frequency (Hz)Standard VGA640 640 720480 480 40031.5 37.5 31.560 75 70VESA VESA VESA SVGA800 800600 60037.9 46.960 75VESA VESA XGA1024 1024 1024768 768 76848.4 56.5 6060 70 75VESA VESA VESA WXGA1280 1280 1360768 768 76847.4 47.8 47.760 60 60VESA VESA VESA Channel Set-up menu 1 Digit DirectWhen “1 Digit Direct” is set to “On”, you can select a channel using one preset number button (0 - 9) on the remote. When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering next digit using the remote. Favourite Set-upAllows you to set your favourite channels by assigning the desired channel numbers. 1Press F/f to select your favourite channel number, then press . 2Press F/f to select your desired channel, then press . To reset the Favourite channels Select “_ _”, then press . Repeat the procedure above to set other favourite channels. Auto TuningTunes in all the available channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. Programme SortingChanges the order in which the channels are stored on the TV. 1Press F/f to select the channel you want to move to a new position, then press . 2Press F/f to select the new position for your channel, then press . Programme LabelsAssigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channel is selected. 1Press F/f to select the channel you want to name, then press . 2Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. To delete all the characters Select “Reset”, then press . 3Repeat the procedure in step 2 until the name is completed. 4Select “OK”, then press . Programme BlockBlocks an individual channel from being watched. 1Press F/f to select the channel you want to block, then press . 2Press F/f to select “Block”, then press . To watch the channel, select “Allow”. Continued
22 GB KLV-22S570A 4-142-343-11(1) Intelligent Picture“On with Indicator”: Automatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. “On”: Automatically reduces the picture noise. “Off”: Turns off the “Intelligent Picture” feature. When “Off” is selected, it will automatically turns off the “Signal Booster” function. Manual Programme PresetBefore selecting “Label”/“AFT”/“Skip”/“Colour System”/“Signal Booster”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 22). Programme/TV System/VHF or UHF Presets programme channels manually. 1Select “Programme”, then press . 2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 000), then press RETURN. 3Press F/f to select “TV System”, then press . 4Press F/f to select your TV broadcast systems, then press . 5Press F/f to go to the frequency range indication (“VHF Low”, “VHF High” or “UHF”), then press . 6Tune the channels as follows: Press G/g to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press G/g. Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 2 to 4 of “Programme Labels” (page 21). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the fine tuning is performed automatically. Skip Skips unused channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) Colour System Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or “PAL60”) according to the channel. Signal Booster (Intelligent Signal Booster) Improves the picture quality if the TV signal is too strong or weak. Press F/f to select either “Off” if the signal is too strong (picture distorted; picture with lines; signal interference) or “Auto” if the signal is weak (snowy picture), then press . Signal Level Displays the signal level for programme currently being watched. red (weak)amber (average)green (good)
23 GB Using MENU Functions KLV-22S570A 4-142-343-11(1) FM Radio Set-up (only in FM Radio mode)Preset up to nine FM radio stations. You can manually preset each FM radio station that can be received in your area and then store the radio frequency of the desired FM radio stations. 1Press F/f to select the desired FM radio station position, then press . 2Press F/f to search the FM radio stations. Searching stops automatically when a station is tuned in. If the station has a noisy sound, you may be able to improve the sound quality by pressing G/g. Press twice to store the FM radio station. 3You may edit the FM radio station label. Press F/f to select alphanumeric characters for the label, then press . 4Repeat steps 1 to 3 to preset other FM radio stations. To enable this feature, access to FM Radio mode by using MENU (page 15), then preset your desired FM radio stations according to the steps mentioned above. Eco menu Power SavingSelects the power saving mode to reduce the power consumption of the TV. Choose either “Standard Power” or “Reduced Power”. Idle TV StandbySelects the time (“1h”, “2h” or “3h”) to set the TV into standby mode automatically, if you do not operate the TV for the specified period of time.
D:\Chin Mengs job\SONY-LCD\SY0205_R7\4142343111_GB\080ADD.fmmasterpage:Left 24 GB KLV-22S570A 4-142-343-11(1) Additional Information Installing the Accessories (Wall-Mount Bracket) To Customers:For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors:Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the Wall-Mount Bracket SU-WL100 (sold separately). Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. Refer to “Detaching the Table-Top Stand and carrying handle from the TV” (page 6). Refer to “TV installation dimensions table” and “Hook location diagram/table” (page 25). Sufficient expertise is required for installing these products, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. SU-WL100: Mounting HookScrew (+PSW 4 × 12) Soft cloth
25 GB Additional Information KLV-22S570A 4-142-343- 11(1) Unit: mm Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifica tions” for its weight. Hook location - When installing the TV onto the Base Bracket. TV installation dimensions table 125 SU-WL100: Screen centre point Model Name Display dimensionsScreen centre dimensionLength for each mounting angle Angle (0°)Angle (20°) AB C DEFGH KLV-22S570A577 389 144 354 143 222 373 354 Hook location diagram/table ba* SU-WL100: * Hook location “a” cannot be used for the model in the table. Model NameHook location KLV-22S570A b
26 GB KLV-22S570A 4-142-343-11(1) Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1Count how many times the 1 (standby) indicator flashes between each two second break. For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. 2Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing 1Check the items listed below. 2If the problem still persists, have your TV serviced by qualified service personnel. No picture (screen is dark) and no sound Check the antenna/cable connection. Connect the TV to the AC power outlet, and press 1 on the TV. 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the video input jack appears on the screen Press / to display the connected equipment list, then select the desired input. Check the connection between the optional equipment and the TV. Double images or ghosting Check the antenna/cable connection. Check the antenna/cable location and direction. Only snow and noise appear on the screen Check if the antenna is broken or bent. Check if the antenna has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optional equipment. When installing optional equipment, leave some space between the optional equipment and the TV. Check the antenna/cable connection. Keep the antenna cable away from other connecting cables. Picture or sound noise when viewing a TV channel Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 22).Some tiny black points and/or bright points appear on the screen The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes Select “Reset” (page 17). No colour or irregular colour when viewing a signal from the Y, P B/CB, PR/CR jacks of / Check the connection of the Y, P B/CB, PR/CR jacks of / and check if each jacks are firmly seated in their respective jacks. No sound, but good picture Press 2 +/– or % (Mute). Check if the “Speaker” is set to “TV Speaker” (page 19). The TV turns off automatically (the TV enters standby mode) Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer” (page 20). Check if the “Idle TV Standby” is activated (page 23). The TV turns on automatically Check if the “On Timer” is activated (page 20). Some input sources cannot be selected Select “Video Labels” and cancel “Skip” of the input source (page 19). The remote does not function Replace the batteries. Picture Sound General
Printed in Thailand Instructions on “Installing the Wall-Mount Bracket” are not supplied in the form of a separate leaflet with this TV. These installation instructions are included within this TV’s instructions manual. KLV-22S570A 4-142-343-11(1) Specifications * Dimensions and mass are approximate values. Design and specifications are subject to change without notice. Model nameKLV-22S570A System Panel System LCD (Liquid Crystal Display) Panel TV SystemB/G, I, D/K, M Colour SystemPAL, PAL60, SECAM, NTSC4.43, NTSC3.58 Channel CoverageB/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41 I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41 D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41, Z1 to Z39 M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84 Sound Output5 W + 5 W Input/Output jacks Antenna 75 ohm external terminal 1, 2Video input (phono jack) 1, 2Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P B/CB: 0.7 Vp-p, 75 ohms/PR/CR: 0.7 Vp-p, 75 ohms Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms Video output (phono jack) Audio output (phono jacks) HDMI IN 1, 2Video: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i PC IN (RGB)PC Input (D-sub 15-pin) (see page 21) G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/ R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p PC IN PC audio input (minijack) iHeadphones jack Power and others Power Requirements 110–240 V AC, 50/60 Hz Screen Size (inches)22 Display Resolution1,366 pixels (horizontal) × 768 lines (vertical) Power ConsumptionIndicated on the rear of the TV. Dimensions (w × h × d)*with stand (mm)577 × 385 × 135 without stand (mm)577 × 389 × 95 Mass* with stand (kg)7.4 without stand (kg)6.7 Optional AccessoriesWall-Mount bracketSU-WL100