Sony Klv 22s570as Operating Instructions

							11 GB
KLV-22S570A
4-142-343-11(1)
Overview of the TV buttons and indicators
11 – PowerTurns the TV on or off. To disconnect the TV from the AC power 
completely, pull the plug from the AC power 
outlet.
2PROG +/-/ / Selects the next (+) or previous (-) channel.
 In TV menu: Moves through the options up ( ) or 
down ( ).
32 +/-/ / Increases (+) or decreases (-) the volume.
 In TV menu: Moves through the options right ( ) 
or left ( ).
4/  – Input select / OK Displays the connected equipment list and selects 
the input source (page 13).
 In TV menu: Selects the menu or option, and 
confirms the setting.
5Displays or cancels the menu.
6 – Remote sensorReceives IR signals from the remote.
7 – Timer indicatorLights up in amber when the timer is set (page 20).
81 – Standby indicatorLights up in red when the TV is in standby mode.
9" – Power indicator Lights up in green when the TV is turned on.
 Flashes while the remote is being operated.
q;Illuminated clock Displays the time when the clock is set (page 20).
PROG
 
						

							D:\Chin Mengs job\SONY-LCD\SY0205_R7\4142343111_GB\060OPT.fmmasterpage:Left
12 GB
KLV-22S570A
4-142-343-11(1)
Using Optional Equipment
Connecting optional equipment
You can connect a wide range of optional equipment to your TV.
S VHS/Hi8/
DVC 
camcorder
Digital video camcorderDVD player with HDMI 
output Home theatre system
Blu-ray disc player
Video game equipment
DVD player without 
component video output
VCR DVD player with component video output
DVD recorderPC
VCR For service 
use onlyHeadphones
 
						

							13 GB
Using Optional Equipment
KLV-22S570A
4-142-343-11(1)
Viewing pictures from the connected equipment
Turn on the connected equipment, then press  /  to display the connected equipment list. Press F/f to select 
the desired input source, then press  . (The highlighted item is selected if 2 seconds pass without any operation 
after pressing 
F/f.) When the input source is set to “Skip” in the “Video Labels” under the “AV Set-up” menu 
(page 19), that input does not appear in the list.
z Press  /  on the TV to display the connected equipment list and select the desired input source. You can also press 
F/f to select the desired input source. Then wait for 2 seconds to display the selected input source.
Jacks/
Input symbol on screenDescription
A 2, and 2
 Video 2Connect to the video jack  2, and the audio jacks  2. If you connect mono 
equipment, connect to the L(MONO) jack  2.
B iConnect to the i jack to listen to sound from the TV on headphones.
C 1, and 1
 Video 1Connect to the video jack  1, and the audio jacks  1. If you connect mono 
equipment, connect to the L(MONO) jack  1.
D /Connect to the video output jack   to record the image from the TV. Connect to 
the audio output jacks   to record the sound from the TV on DVD recorder or 
VCR. To turn off the sound of the TV speakers, set “Speaker” to “Audio System” 
(page 19). If you connect mono equipment, connect to the L jack  .
 The monitor output jacks cannot support Component, HDMI and PC signals source 
pictures, also digital audio signal for sound. 
E /
 ComponentConnect to the component jacks and the audio jacks  / . For better picture 
quality, component connection is recommended if your DVD player has a 
component video output.
F PC IN   (RGB)/
PCConnect to the PC IN   (RGB) jack and the audio jack  . It is recommended 
to use a PC cable with ferrite core.
G HDMI IN
HDMI 1 or
HDMI 2Connect to the HDMI IN 1 or 2 jack if the equipment has an HDMI jack. The 
digital video and audio signals are input from the equipment.
 The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p, 720p 
(50/60 Hz), 1080i (50/60 Hz) and 1080p (50/60 Hz).
 Be sure to use only an HDMI cable that bears the HDMI logo (recommended Sony 
HDMI cable).
 To connect a PC, use the PC IN jack.
 
						

							14 GB
KLV-22S570A
4-142-343-11(1)
Viewing Twin Picture
You can view two pictures (external input and TV 
programme) on the screen simultaneously.
Connect the optional equipment (page 12), and make 
sure that images from the equipment appear on the 
screen (page 13).
1Press .
Two pictures are displayed simultaneously.
2Press G/g to select active picture.
3Press number buttons or PROG +/– to select 
the TV channel.
To return to single picture mode
Press  ,   or RETURN.
 You cannot change the size of the pictures.
 The picture and sound from the monitor output jacks 
/ (refer D in page 12) will follow the left 
window (Video 1 or Video 2 only).
 In Twin Picture mode, as picture size reduced, this 
may decrease picture smoothness.
z   The highlighted picture is audible. You can switch the 
audible picture by pressing G/g.
   You can also use the Twin Picture feature by selecting 
“Twin Picture” from the Tools menu (page 10).
Viewing PIP (Picture in 
Picture)
You can view two pictures (PC input and TV 
programme) on the screen simultaneously.
Connect a PC (page 12), and make sure that images 
from a PC appear on the screen (page 13). 
1Press .
Two pictures are displayed simultaneously.
2Press number buttons or PROG +/– to select 
the TV channel.
To return to single picture mode
Press 
 or RETURN.
 You cannot display resolutions higher than WXGA 
(1360 × 768 pixels).
 In PIP mode, as picture size reduced, this may 
decrease picture smoothness.
z You can switch the audible picture by selecting 
“Audio Swap” from the Tools menu (page 10).
 You can also use the PIP feature by selecting “PIP” 
from the Tools menu (page 10).
Twin Picture Availability
In Left Window In Right Window
Video 1
Video 2No picture and no 
sound
Component
HDMI 1 (except PC input 
mode)
HDMI 2 (except PC input 
mode)TV programme
Left 
WindowRight Window
PIP Availability
In Main Window In Sub Window
PC TV programme
Sub Window 
(Location of 
the sub 
window can 
be moved by 
pressing 
F/f/G/g.
)
Main 
Window
 
						

							D:\Chin Mengs job\SONY-LCD\SY0205_R7\4142343111_GB\070MEN.fmmasterpage:Left
Using MENU Functions
15 GB
KLV-22S570A
4-142-343-11(1)
Using MENU Functions
Navigating through menus
Listening to the FM Radio
You are able to listen to the FM radio stations using your TV by connecting an antenna (page 5). FM Radio tuning 
range is from 87.5-108.0 MHz.“MENU” allows you to enjoy various convenient features of this TV. You can easily 
select channels or inputs sources, preset FM radio stations and change the settings 
for your TV.
1Press MENU.
2Press F/f to select an option, then press  .
To exit the menu, press MENU.
2
1
MenuDescriptions
1 Favourites Displays the favourite list (page 16).
 To watch the desired channel, select the favourite channel number, then 
press .
 To add the current channel to the favourite list, select “Add to 
Favourites”. When the favourite list is full, select “Edit Favourites” to 
remove any channel from your list and try again (page 16).
2 Programme 
ListDisplays available TV channels.
 To watch the desired channel, select the channel, then press  .
 To assign a label to a channel, select “Edit Programme Labels”, then see 
page 21.
3 External 
InputsSelects equipment connected to your TV.
 To watch the desired external input, select the input source, then press 
.
 To assign a label to an external input, select “Edit Video Labels”, then 
see page 19.
4 FM Radio Listens to the FM Radio (page 15).
5 Settings Displays the “Settings” menu where most of the advanced settings and 
adjustments are performed. For details about settings, see page 17 to 
23.
ToDo this
Access to FM Radio mode Press MENU and select “FM Radio”.
Exit from FM Radio mode Press MENU, select the desired items: “Programme List” or “External Inputs”, then 
press  . Select the desired TV channels or external inputs and press  .
Listen to preset stations 1 Access to FM Radio mode.
2 Press MENU and select “Settings”. Preset the desired FM radio stations and its labels 
in “FM Radio Set-up” from “Channel Set-up” menu (page 23).
 You can also access to “FM Radio Set-up” by selecting “FM Radio Set-up” from the 
Tools menu in FM Radio mode (page 10).
3 Exit from “Channel Set-up” menu by pressing MENU. The selected preset FM radio 
station number and label will appear on the screen. To select the desired preset FM 
radio station, press PROG +/–.
 You can also use the 1-9 buttons on the remote to directly select the desired preset 
FM radio station.
Continued
 
						

							16 GB
KLV-22S570A
4-142-343-11(1)  If the station has a noisy sound, you may be able to improve the sound quality by pressing G/g.
 When a FM stereo programme has static noise, press AUDIO until “Mono” appears. There will be no stereo effect, but the 
noise will be reduced.
Using the Favourite List
Listen to non-preset stations 1 Access to FM Radio mode.
2 Press F/f to automatically search for the desired FM radio station.
 You can also manually search for the desired FM radio station by pressing G/g. The 
available radio frequency is only for temporary listening pleasure and cannot be 
stored in the memory.
 If the message “Please set-up FM Radio.” appears, display the “Channel Set-up” 
menu and select “FM Radio Set-up” to preset the desired FM radio stations 
(page 23).
ToDo this
The Favourite feature lets you select programmes from a list of up to 16 favourite 
channels that you specify.
1Press MENU.
2Press F/f to select “Favourites”, then press .
3Perform the desired operation as shown in the following table or 
displayed on the screen.
Favourite List
ToDo this
Watch a channel Press F/f to select the channel number, then press  .
Turn off the Favourite list Press RETURN to return to the previous screen.
Press MENU or   to exit the menu.
Add a current channel to the 
Favourite listPress 
F/f to select “Add to Favourites”, then press  .
Remove a channel from the 
Favourite listPress 
F/f to select “Edit Favourites”, then press  .
The “Favourite Set-up” screen appears. For details, see “Favourite Set-up” on page 21.
 
						

							17 GB
Using MENU Functions
KLV-22S570A
4-142-343-11(1)
Settings adjustment
You are able to change the settings of your TV from “Settings” menu.
1Press MENU. Press F/f to select “Settings”, then press  .
2Press F/f to select a menu icon, then press .  
3Press F/f/G/g to select an option or adjust a setting, then press  .
 The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed.
 Picture menu
Picture ModeSelects the picture mode except for PC input source.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Cinema”: For optimum picture quality of film videos.
Display Mode 
(only in PC mode)Selects the display mode for PC input source.
“Video”: For video images.
“Text”: For text, charts or tables.
ResetResets all the “Picture” settings except “Picture Mode” and “Display Mode” to the 
factory settings.
BacklightAdjusts the brightness of the backlight.
PictureIncreases or decreases picture contrast.
BrightnessBrightens or darkens the picture.
ColourIncreases or decreases colour intensity.
HueIncreases or decreases the green tones and red tones.
 “Hue” can only be adjusted for an NTSC colour system (e.g. U.S.A. video tapes).
Colour TemperatureAdjusts the whiteness of the picture.
“Cool”: Gives the white colours a blue tint.
“Neutral”: Gives the white colours a neutral tint.
“Warm 1”/“Warm 2”: Gives the white colours a red tint. “Warm 2” gives a redder tint 
than “Warm 1”.
 “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”.
SharpnessSharpens or softens the picture.
Noise ReductionReduces the picture noise (snowy picture) in a weak broadcast signal.
“High”/“Medium”/“Low”: Modifies the effect of the noise reduction.
“Off
 ”: Turns off the “Noise Reduction” feature.
MPEG Noise 
ReductionReduces the picture noise in MPEG-compressed video. Choose either “High”, “Medium”, 
“Low” or “Off
 ”.
Advanced SettingsCustomises the “Picture” function in more detail. When you set “Picture Mode” to 
“Standard” or “Cinema”, you can set/change these settings.
“Reset”: Resets all the advanced settings to the factory settings.
“Adv. Contrast Enhancer”: Automatically adjusts “Backlight” and “Picture” to the 
most suitable settings judging from the brightness of the screen. This setting is 
especially effective for dark images scenes. It will increase the contrast distinction of the 
darker picture scenes.
“Gamma”: Adjusts the balance between bright and dark areas of the picture.
“Clear White”: Emphasises white colours.
“Live Colour”: Makes colours more vivid.
 
						

							18 GB
KLV-22S570A
4-142-343-11(1)
 Sound menu
Sound Mode“Dynamic”: Enhances treble and bass. Recommended for home entertainment.
“Standard”: For standard sound.
“Clear Voice”: Makes voice sound clearer.
ResetResets all the “Sound” settings except “Sound Mode” and “Dual Sound” to the factory 
settings.
5 Band EqualizerAdjusts sound frequency settings.
1Make sure that “Adjust” is selected, then press  .
Selecting “Reset” will set your TV to the factory settings.
2Press G/g to select the desired sound frequency, then press F/f to adjust the setting and 
press  . The adjusted settings will be received when you select “Sound Mode” options.
 Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency 
will affect lower pitched sound.
BalanceEmphasises left or right speaker balance.
Intelligent VolumeMinimizes the difference in volume level between all programmes and adverts (e.g. 
adverts tend to be louder than programmes).
Volume OffsetAdjusts the volume level of the current input relative to other inputs.
SurroundChoose either “On” (surround), “Simulated Stereo” (stereo-like monaural sound) or “Off”.
Dual SoundSelects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
 If the signal is very weak, the sound becomes monaural automatically.
 If the stereo sound is noisy when receiving a NICAM programme, select “Mono”. The 
sound becomes monaural, but the noise is reduced.
 The “Dual Sound” setting is memorised for each programme position.
 You cannot receive a stereo broadcast signal when “Mono” is selected for the programme 
position.
z If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” 
or “Sub”. However, when the external equipment connected to the HDMI jack is selected, 
this is fixed to “Stereo”.
 If you access to FM Radio mode, set “Dual Sound” to “Stereo” or “Mono”.
Broadcasting Selection
NICAM stereo Stereo (stereo sound)/Mono (regular sound)
NICAM bilingual Main (main sound)/Sub (sub sound)/Mono (regular sound)
NICAM monaural Main (main sound)/Mono (regular sound)
A2 (German) stereo Stereo (stereo sound)/Mono (regular sound)
A2 (German) bilingual Main (main sound)/Sub (sub sound)
 
						

							19 GB
Using MENU Functions
KLV-22S570A
4-142-343-11(1)
 Screen menu
Wide ModeFor details about wide mode, see page 10.
Auto WideAutomatically changes the wide mode according to the input signal from an external 
equipment. To keep your setting, select “Off”.
 “Auto Wide” is only available when watching programmes from video input, HDMI and 
component input in format 480i or 576i.
z Even if “Auto Wide” is set to “On” or “Off”, you can always modify the format of the 
screen by pressing   repeatedly.
4:3 DefaultSelects the default screen mode for use with 4:3 broadcasts.
“Wide Zoom”: Displays conventional 4:3 broadcasts with an imitation wide screen 
effect.
“Normal”: Displays conventional 4:3 broadcasts in the correct proportions.
“Off”: Keeps the current “Wide Mode” setting when the channel or input is changed.
 “4:3 Default” is available only if “Auto Wide” is set to “On”.
Display AreaAdjusts the screen area for displaying the picture.
“Normal”: Displays the picture in the original size.
“-1”/“-2”: Enlarges the picture to hide the edge of the picture.
Horizontal ShiftAdjusts the horizontal position of the picture.
Vertical ShiftAdjusts the vertical position of the picture when “Wide Mode” is set to “Zoom”.
Vertical SizeAdjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom” or 
“Zoom”.
 Set-up menu
Auto Start-upStarts the initial set-up procedure. Usually, you do not need to do this operation because 
it was done when the TV was first installed (page 6). However, this option allows you 
to repeat the process (e.g. to retune the TV after moving house, or to search for new 
channels that have been launched by broadcasters).
LanguageSelects the language in which the menus are displayed.
AV Set-up
Video Labels
Assigns a name to any equipment connected to the side and rear jacks. The name will 
be displayed briefly on the screen when the equipment is selected. You can skip input 
signals from connected equipment that you do not want displayed on the screen.
1Press F/f to select the desired input source, then press  .
2Press F/f to select the desired option below, then press  .
Equipment labels: Uses one of the preset labels to assign a name to connected 
equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” 
(page 21).
“Skip”: Skips an unnecessary input source.
Speaker
Turns on/off the TV’s internal speakers.
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound 
through the TV speakers.
“Audio System”: The TV speakers are turned off in order to listen to the TV’s sound 
only through your external audio equipment connected to the audio output jacks.
 All items in “Sound” menu except “Dual Sound” are not available when “Speaker” is set to 
“Audio System”.
Continued
 
						

							20 GB
KLV-22S570A
4-142-343-11(1)
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or 
“PAL60”) according to the composite video signal from the input source.
Timer Settings
Sets the clock to display the time and the timer to turn on/off the TV.
Sleep Timer
Sets the TV to automatically switch to standby mode after a certain amount of time.
z If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
   A notification message appears on the screen one minute before the TV switches to standby 
mode.
On Timer
Sets the TV to automatically turn on from standby mode.
“Day”: Selects the day on which you want to activate the “On Timer”.
“Time”: Sets the time to turn on the TV.
“Duration”: Selects the time period after which the TV automatically switches to 
standby mode again.
 “On Timer” is only available when “Clock Set” is set.
 When the “Sleep Timer” or “On Timer” is activated, the   (Timer) indicator on the TV 
front panel lights up in amber.
Clock Set
Allow you to adjust the clock manually.
 “Clock Set” may automatically reset if the AC power is turned off for about one day.
Clock Illumination
Sets the brightness of the clock displays on the front panel of the TV. Choose either 
“On”, “Dim” or “Off”.
Product InformationDisplays your TV’s product information.
Factory SettingsResets all settings to factory settings other than “Programme Block”, programme preset 
data and the FM Radio preset data. After completing this process, the initial set-up 
screen is displayed the next time you turn on the TV. Completing auto tuning
in initial set-up will reset these settings. To keep them, select “Cancel” in the auto tuning 
confirmation dialogue.
 Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any 
buttons.
 PC Settings menu
Wide ModeSelects a screen mode for displaying input from your PC, see page 10.
“Normal”: Displays the picture in its original size.
“Full 1”: Enlarges the picture to fill the display area, keeping its original horizontal-to-
vertical aspect ratio.
“Full 2”: Enlarges the picture to fill the display area.
ResetResets all the “PC Settings” except “Wide Mode” to the factory settings.
Auto AdjustmentAutomatically adjusts the display position and phase of the picture when the TV 
receives an input signal from the connected PC.
z “Auto Adjustment” may not work well with certain input signals. In such cases, manually 
adjust “Phase” and “Horizontal Shift”.
PhaseAdjusts the phase when the screen flickers.
PitchAdjusts the pitch when the picture has unwanted vertical stripes.
Horizontal ShiftAdjusts the horizontal position of the picture.