Sony Klv 17hr3 Operating Instructions

22
First Time Operation 
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose 
the language of the menu screen 2) choose the country in which you are going to operate the TV, 3) search and 
store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) 
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by...

23
GB
5 The Auto Tuning menu appears on the screen. Press the OK 
button to select Yes.
6The TV starts to automatically search and store all
 available broadcast channels for you. 
  This procedure could take some minutes. Please be  patient 
and do not press any buttons, otherwise automatic tuning 
will not be completed.
If no channels were found during the auto tune process, a 
message appears automatically on the screen asking you to 
connect the aerial. Check the aerial connection (refer to 
page...

24
TV Functions
Introducing and Using the Menu System
Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons 
on the Remote Control to operate the menu system: 
1To switch on the menu screens:
Press the 
MENU button to switch the first level menu on.
Picture AdjustmentPicture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:Set:OKEnd:MENU
Personal
80
50
50
50
70
Auto
Normal
TV Functions
2To navigate through the...

25
GB
The Picture Adjustment Menu
The “Picture Adjustment”  menu allows you to 
alter the picture settings.
To do this:
Press the 
MENU button and then press OK to 
enter this menu. Next, press 
v or V to select the 
desired option and press 
OK. Finally, read below 
how to operate into each option.
Picture Mode  This option allows you to customise the picture mode based on the programme 
you are watching. After selecting this option press 
OK. Next, press repeatedly v 
or 
V to select:   
Live  (for...

26
ResetPress OK to reset the picture to the factory preset levels.
Noise This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast
Reduction  signal. However, it can be modified. After selecting this option press 
b. Next, press v or V to 
select Off. Finally, press 
OK to store.
Colour ToneThis option allows you to alter the tint of the picture. After selecting this option press b. Next, press 
repeatedly 
v or V to select: Warm (gives the white colours a red...

27
GB
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to 
alter the sound settings.
To do this: 
Press the 
MENU button and press v to select 
, then press 
OK to enter this menu. Next, 
press 
v or V to select the desired option and 
press 
OK. Finally, read below how to operate 
into each option. 
SoundThis option allows you to customise the sound effect. After selecting this
Effectoption press 
OK. Next, press repeatedly v or V to select: 
NaturalEnhances clarity, detail and presence...

28
The Features Menu
The “Features” menu allows you to alter 
various settings of the TV.
To do this: 
Press the 
MENU button and press v twice to 
select  , then press 
OK to enter this menu. 
Next, press 
v or V to select the desired option 
and press 
OK. Finally, read below how to 
operate into each option.
POWER SAVING
This option allows you to reduce the power consumption of this TV.
To  d o  t h i s :
After selecting the option, press 
OK. Then, press v or V to select Reduce. Next, press OK to...

29
GB
TV SPEAKERS
This option allows you to turn off the TV speakers e.g. to listen to the sound through external audio equipment con-
nected to the TV.
To do this:
Press the 
v or V buttons to select one of the following options, then press the OK button.
OnThe sound is output from the TV speakers.
One Time OffThe TV speakers are temporarily turned off allowing you to listen to the sound from external 
audio equipment.
The TV Speakers option automatically returns to On when the TV set is switched off....

30
The Set Up Menu
The “Set Up” menu allows you to alter various 
options on this TV.
To do this: 
Press the 
MENU button and press v three times 
to select   , then press 
OK to enter this menu. 
Next, press 
v or V to select the desired option 
and press 
OK. Finally, read below how to 
operate into each option.
LANGUAGE
This option allows you to select the language that menus are displayed in. 
To do this: 
After selecting the option, press 
OK and then proceed in the same way as in step 3 of the...

31
GB
PROGRAMME LABELS
This option allows you to name a channel using up to five characters (letters or numbers).
To do this: 
1Once you have entered the Set Up menu as it is explained in the previous page and after selecting this option, 
press OK, then press v or V to select the programme number with the channel you wish to name. Next press OK.
2With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next 
press OK.
When you have finished, press v, V, B...