Sony Kds 70r2000 Operating Instructions
Here you can view all the pages of manual Sony Kds 70r2000 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 51
51 GB Additional Information Specifications Display Unit Power Requirements: 220–240 V AC, 50 Hz Projection System: 3 SXRD Panel, 1 lens projection system SXRD Panel: Size 0.61 inch SXRD panel Resolution 1920 × 1080 pixels Projection Lenses: High performance, large-diameter hybrid lens F2.5 Lamp: KDS-70R2000: Ultra high pressure lamp, 180 W, XL-5300 KDS-55A2000: Ultra high pressure lamp, 120 W, XL-5200 Screen Size: KDS-70R2000: 70 inches (Approx. 177.8 cm measured diagonally) KDS-55A2000: 55 inches...
Page 52
52 GB PC Input Signal Reference Chart This TV’s PC input does not support Sync on Green or Composite Sync. The PC input signal displays on-screen in a smaller size than the actual TV screen size and does not support interlaced signals. For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. Signals Horizontal...
Page 53
53 GB Additional Information Troubleshooting Check whether the 1 (on/standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. (When the indicator flashes in two- or three-blink intervals, see page 55.) 1Count how many 1 (on/standby) indicator flashes between each two second break. For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. 2Press 1 on the TV (front) to switch it off, disconnect the...
Page 54
54 GB Picture flashes initially when changing to HDMI mode or when switching on the TV in HDMI mode This is probably caused by the authentication process between HDMI equipment and the TV. It does not indicate a malfunction. A white oval image appears on the screen This is due to strong light reflecting off both the TV screen and reflections coming from behind the screens. Position your TV away from strong ambient light or sunlight, or lower any ambient lights. Sound Problem Cause/Remedy No...
Page 55
55 GB Additional Information Uneven colour uniformity appears on the screen when the TV is powered on After turning on the TV, you may notice a slight colour (tint) variation in certain areas of the picture. This will last only a few minutes each time you turn on the TV. This is a normal temperature characteristic of the components and not a malfunction. The remote does not function Check that the remote is set correctly for the equipment you are using. Check whether the equipment you want to use...
Page 56
56 GB Index Numerics 1 Digit Direct 36 14:9 19 2 5 4:3 Default 30 4:3 18 A Advanced Iris 26, 41 Advanced Settings 27 Aerial, connecting 7 AFT 37 All Reset 33 Analogue Set-up menu 36 Analogue Text 18 Audio Filter 37 Audio Language 39 Audio Out 32 Audio Type 39 Auto Adjustment 42 Auto Clock Set 19, 23 Auto Format 30 Auto Start-up 31 Auto Tuning analogue and digital channels 8 analogue channels only 36 digital channels only 40 Auto Volume 28 AV Preset 34 AV Set-up menu 34 AV2 Output 34 AV3 Input...
Page 57
57 GB Additional Information T Target Inputs picture 25 screen 30 sound 28 Technical Set-up 40 Timer 15 Timer ( ) indicator 15 Timer list 21 Timer REC 20 Timer Settings 31 Tools 19, 23 Treble 28 V VCR connecting 7 recording 20 Vertical Shift 30, 42 Vertical Size 30 Volume Offset 28 W Wide 18 Z Zoom 19