Sony Kds 70r2000 Operating Instructions

41 GB
Using MENU Functions
PC Settings menu
You can select the options listed below on the PC 
Settings menu when the TV is connected to a PC.
1Press  /  repeatedly until  PC 
appears on the screen.
2Press MENU to display the PC settings 
menu.
Note
When you connect a PC to your TV for the first time, you 
may need to adjust the screen display. In such cases, perform 
“Auto Adjustment” or adjust the “Phase”, “Pitch”, 
“Horizontal Shift”, or “Vertical Shift” in “Others” (page 42).
Picture
Display Mode...

42 GB
Colour TemperatureAdjusts the whiteness of the picture.
“Cool”: Gives the white colours a blue tint.
“Neutral”: Gives the white colours a neutral tint.
“Warm 1”/“Warm 2”: Gives the white colours a red tint. “Warm 2” gives a redder 
tint than “Warm 1”.
Sound
Sound Mode
Selects the sound mode.
“Dynamic”: Enhances treble and bass.
“Standard”: For standard sound. Recommended for home entertainment.
“Custom”: Provides a flat response. Sound quality as customized on the connected 
PC is maintained in the...

43 GB
Using Optional Equipment
Connecting optional equipment
Tip
You can select the front socket input signals by setting “AV7 
Input” in the “AV Set-up” menu (page 34).
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (front)
S VHS/Hi8/
DVC camcorder with 
composite output
HeadphonesHDV camcorder with 
component output
S VHS/Hi8/
DVC camcorder with 
composite output
Headphones
HDV camcorder with 
component...

44 GB
Connecting to the TV (rear)
DVD playerDecoder DVD recorder
VCRVideo game 
equipment
DVD player
Digital receiver Decoder
PC
Hi-Fi audio
equipmentDVD player with 
component output VCR
Digital audio (PCM)
component DVD player
S VHS/Hi8/
DVC camcorder 
with S-Video 
output
(for only 
HDMI IN 6)
To connect Do this
Video game 
equipment, DVD 
player or decoder 
EConnect to the scart socket  /
1. When you connect the 
decoder, the scrambled signal from 
the TV tuner is output to the 
decoder, then the...

45 GB
Using Optional Equipment
Programming the 
remote
This remote is preset to operate Sony TVs, most Sony 
DVDs, VCRs and AMPs (Home Theatre, etc.).
To control VCRs and DVDs of other manufacturers 
(and some other Sony VCR, DVD and AMP models), 
do the following procedure to programme the remote.
Note
Before you start, look up the three-digit code for your brand 
of DVD, VCR or AMP from the “Manufacturer’s codes” on 
page 46.
1Press and hold the DVD, VCR or AMP 
function button you want to programme on...

46 GB
4Switch on your equipment and check that 
the following main functions work.
H (playback), x (stop), m (rewind), M (fast 
forward), channel selection for both VCR and 
DVDs, TOP MENU/MENU and 
F/f/G/g only 
for DVDs.
If your equipment is not working, or some of the 
functions do not work
Enter the correct code or try the next code listed 
for the brand. However, not all models of every 
brand may be covered.
To return to normal TV operation
Press the TV function button.
Manufacturer’s codes
VCR...

47 GB
Using Optional Equipment
AV receiver
Digital terrestrial receiver Brand Code
SONY 451, 452, 453, 454
Brand Code
SONY 501, 502, 503
 

48 GB
Replacing the lamp
The Projection lamp, like all lamps, will eventually 
lose brightness and functionality which affects the 
overall performance of your TV. How long the Lamp 
maintains its brightness will vary depending upon 
your usage and environmental conditions. To 
maintain the quality of your viewing experience, Sony 
recommends that you replace the Lamp (1) when the 
screen becomes dark or the colour looks unusual; (2) 
when   on the front of the TV flashes; (3) after 
approximately 8,000...

49 GB
Additional Information
6Pull out the lamp.
Hold the indented grooves of the lamp as 
shown, and pull the lamp straight out. 
If the lamp is hard to remove, pull the right 
side of the lamp for additional traction 
(KDS-55A2000).
KDS-55A2000
KDS-70R2000
Notes
 Do not touch the inside of the lamp compartment.
 The lamp is very hot immediately after use. Never 
touch the glass portion of the lamp or the surrounding 
parts.
 After the used lamp has cooled, place it into the empty 
box of the...

50 GB
9Put the outside lamp cover back in its 
place.
Replace the cover, inserting it from the left 
side. Press the two tabs on the right side 
(KDS-55A2000) or press the clamp on the 
right side (KDS-70R2000) to secure the 
cover.
KDS-55A2000
KDS-70R2000
10Turn on the TV and set the Lamp 
Replacement option in the Set-up menu 
(page 32). This setting is necessary to 
inform you when the next lamp 
replacement is needed.
Notes
 Until you set the Lamp Replacement option, a 
message announcing that the...