Sony KDL 55HX850, 46HX850 Tv User Manual

							 i-ManualPrint Font  Size   
Basic Operations
Parts  Description
Watching TV
Using Other Devices
Using “BRAVIA”  Sync
Devices
Useful Functions
Using Internet
Using Home  Network
(DLNA)
Configuring Various
Settings
Troubleshooting
How  to Use Bookmarks
Top Page  > Troubleshooting  > Home  Network  Symptoms
Home  Network Symptoms
Your TV cannot  connect  to the server.
A message appears stating  that the TV cannot  connect  to your  network.
Server  is  inaccessible.
Some media  files in the USB device or server are  not displayed.
When using the renderer function, music files cannot  be played  back.
Your TV cannot connect to the server.
Check the LAN  cable or connection to your  server and your  TV.
Check if your  network  is  properly configured on your  TV.
A message  appears stating that the TV cannot connect to your
network.
Check the current network  settings.  Press the HOME button, then  select  [Settings] → 
[Network]  → [Network  Setup] → [View  Network Status]. If all  of your  network  settings  are  0.0.0.0,
your  server may not be connected properly. Check your  network  connections and/or server’s
instruction manual for connection information,  or contact  the person who set up the network
connection (network administrator).
Reconfigure your  network  settings.
If the LAN  cable is  connected to an active server and the TV has acquired an IP  address, check
your  server’s  connections and configurations.  (Your  IP  address configuration  can be viewed by
selecting  the [View  Network Status] option.)
Server is  inaccessible.
Check your  LAN  cable/connection  or your  server connections. The  TV may have lost connection
with the server.
Perform [Media  Server  Troubleshooting]  to check if your  media  server is  properly communicating
with the TV. Press the HOME button, then  select 
 [Settings] →  [Network]  → [Home  Network
Setup] → [Media  Server  Troubleshooting].
Some media files in the USB device or server are not displayed.
Unsupported  files may not be displayed.
The  accessible file or folder  limit in a directory is  1,000  for USB and 30,000 for a server. This limit
includes non-supported  files or just folders. Files or folders  are  populated based  on their
timestamps. Photo, music files or folders  exceeding the limit will not be displayed. 
						

							When  using  the renderer function, music files cannot be played
back.
Some applications display a photo  file pre -installed in the PC simultaneously with music playback
when using the renderer function. Depending on the pre -installed photo  file, music playback  may not
be possible,  but may become possible by changing the photo  file.
Trademark InformationList  of Contents
© 2012 Sony Corporation
  Top of  Page 
						

							 i-ManualPrint Font  Size   
Basic Operations
Parts  Description
Watching TV
Using Other Devices
Using “BRAVIA”  Sync
Devices
Useful Functions
Using Internet
Using Home  Network
(DLNA)
Configuring Various
Settings
Troubleshooting
How  to Use Bookmarks
Top Page  > Troubleshooting  > Remote  Control Symptoms
Remote  Control Symptoms
Remote  control  does not operate.
Remote control  does not operate.
Press a button on the TV to determine  if the problem is  with the remote control  or not.
Check the polarity  of the batteries or replace the batteries.
Point the remote control  at the remote control  sensor  located  at the front  of the TV.
Keep the remote control  sensor  area  clear from obstacles.
Fluorescent  light can interfere with remote control  operation;  try turning off any fluorescent light.
Trademark InformationList  of Contents
© 2012 Sony Corporation
  Top of  Page
Slide  the cover to open.