Sony Kdl 46x2000 Operating Instructions

41 GB
Using MENU Functions
Others
Auto Adjustment
Automatically adjusts the display position, phase and pitch of the picture when the 
TV receives an input signal from a connected PC.
Tip
Auto Adjustment may not work well with some input signals. In such cases, manually adjust 
“Phase”, “Pitch”, “Horizontal Shift” and “Vertical Shift”.
ResetResets all the “Others” settings to the factory settings.
PhaseAdjusts the phase when the screen flickers.
PitchAdjusts the pitch when the picture has unwanted...

42 GB
Connecting optional equipment
Tip
You can select the side socket input signals by setting “AV7 
Input” in the “AV Set-up” menu (page 33).
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
S VHS/Hi8/DVC 
camcorder
Headphones HDV camcorder 
with component 
output
For service use only
To connect Do this
HDV camcorder 
with component 
output AConnect to the component video Y, 
P
B/CB, PR/CR sockets  7...

43 GB
Using Optional Equipment
Connecting to the TV (rear)
6  5 
L 
R IN  IN 
L 
R 
PCOPTICAL OUT
DVD player
Decoder
DVD recorder
VCR Video game 
equipment
DVD playerDigital receiver
DecoderPC
Hi-Fi audio 
equipment
DVD player with 
component output
VCR Digital audio 
(PCM) component
DVD player
To connect Do this
Digital receiver or 
DVD player EConnect to the HDMI IN 5 or 6 
socket if the equipment has a 
HDMI socket. The digital video 
and audio signals are input from 
the equipment. If the equipment...

44 GB
Programming the 
remote
This remote is preset to operate Sony TVs, most Sony 
DVDs, VCRs and AMPs (Home Theatre, etc.).
To control VCRs and DVDs of other manufacturers 
(and some other Sony VCR, DVD and AMP models), 
do the following procedure to programme the remote.
Note
Before you start, look up the three-digit code for your brand 
of DVD, VCR or AMP from the “Manufacturer’s codes” on 
page 44.
1Press and hold the DVD, VCR or AMP 
function button you want to programme on 
the remote, then press...

45 GB
Using Optional Equipment
DVD brand list
DVD Player
DVD/VCR Player
DVD recorder
AUX Sony systems brand list
DAV Home Theatre SystemAV receiver
Digital terrestrial receiver Brand Code
SONY 001, 029, 030, 036, 037, 038, 039, 040, 
041, 042, 043, 044, 053, 054, 055
AIWA 021 
AKAI 032
DENON 018, 027, 020, 002
GRUNDIG 009, 028, 023, 024, 016, 003
HITACHI 025, 026, 015, 004, 035
JVC 006, 017
KENWOOD 008
LG 015, 014, 034
LOEWE 009, 028, 023, 024, 016, 003
MATSUI 013, 016
ONKYO 022, 033
PANASONIC 018, 027,...

46 GB
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDL-52X2000:
52 inches (Approx. 132.2 cm measured diagonally)
KDL-46X2000:
46 inches (Approx. 116.8 cm measured diagonally)
KDL-40X2000:
40 inches (Approx. 101.6 cm measured diagonally)
Display Resolution:
1,920 dots (horizontal) × 1,080 lines (vertical)
Power Consumption:
KDL-52X2000: 290 W
KDL-46X2000: 249 W
KDL-40X2000: 205 W
Standby Power Consumption*:
0.3 W
* Specified standby power is reached after the TV...

47 GB
Additional Information
Sound Output
11 W + 11 W
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Optional Accessories
 Wall-Mount Bracket SU-WL51

 Colour Variation Unit 
CRU-52X1 (for KDL-52X2000)
CRU-46X1 (for KDL-46X2000)
CRU-40X1 (for KDL-40X2000)
Design and specifications are subject to change 
without notice.
PC Input Signal Reference Chart
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 For...

48 GB
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated. 
1Count how many 1 (standby) indicator flashes between each two second break.
For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.
2Press 1 on the TV (right side) to switch it off, disconnect the mains lead, and inform your dealer or 
Sony service centre of how the indicator flashes (number of...

49 GB
Additional Information
Sound
Problem Cause/Remedy
No sound, but good picture Press 2 +/– or % (Mute).
 Check that “Speaker” is set to “On” in the “Set-up” menu (page 32).
Noisy sound See “Picture noise” causes/remedies on page 48.
Channels
Problem Cause/Remedy
The desired channel cannot be 
selected Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels are blank Scrambled/Subscription only channel. Subscribe to the Pay Per View 
service.
 Channel...

50 GB
Index
Numerics
1 Digit Direct 35
14:9 17
4:3 Default 29
4:3
 17
A
Advanced Settings 26
Aerial, connecting
 5
AFT 36
All Reset 32
Analogue Set-up menu
 35
Analogue Text 17
Audio Filter 36
Audio Language
 38
Audio Out 32
Audio Type 38
Auto Adjustment
 41
Auto Clock Set 18, 22
Auto Format 29
Auto Start-up
 31
Auto Tuning
analogue and digital channels
 7
analogue channels only
 35
digital channels only 39
Auto Volume 27
AV Preset
 33
AV Set-up menu 33
AV2 Output
 33
AV7 Input 33
B
Backlight 24, 40...