Sony Kdl 46x2000 Operating Instructions

							© 2006 Sony Corporation
LCD Digital Colour TV
2-698-671-13(1)
Operating Instructions
Before operating the TV, please read the “Safety 
information” section of this manual.
Retain this manual for future reference.
For useful information about Sony products 
KDL-52X2000
KDL-46X2000
KDL-40X2000
 
						

							2 GB
NOTICE FOR 
CUSTOMERS IN THE 
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this 
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced with 
the same rating of fuse approved by ASTA or BSI to BS 1362 
(i.e., marked with   or  ) must be used.
When an alternative type of plug is used it should be fitted 
with the same rating of fuse, otherwise the circuit should be 
protected by a 13 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable fuse 
cover, be sure to attach the fuse cover after you change the 
fuse. Never use the plug without the fuse cover. If you should 
lose the fuse cover, please contact your nearest Sony service 
station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and 
replace the fuse.
Thank you for choosing this Sony product.
Before operating the TV, please read this manual 
thoroughly and retain it for future reference.
• Any functions related to Digital TV (with   logo) will 
only work in countries or areas where DVB-T (MPEG2) 
digital terrestrial signals are broadcasted. Please confirm 
with your local dealer if you can receive a DVB-T signal 
where you live.
 Although this TV set follows DVB-T specifications, 
compatibility with future DVB-T digital terrestrial 
broadcasts cannot be guaranteed.
 Some Digital TV functions may not be available in some 
countries.
Trademark information
  is a registered trademark of the DVB Project
 Manufactured under license from BBE Sound, Inc. 
Licensed by BBE Sound, Inc. under one or more of the 
following US patents: 5510752, 5736897. BBE and BBE 
symbol are registered trademarks of BBE Sound, Inc.
 “Dolby”, “Pro Logic”, and the double-D symbol are 
trademarks of Dolby Laboratories.
 Manufactured under license from Dolby Laboratories.
 TruSurround technology is used as a virtualizer for Virtual  
Dolby Surround.
 TruSurround, SRS and (
z) symbol are trademarks of SRS 
Labs, Inc.
TruSurround technology is incorporated under license 
from SRS Labs, Inc.
 HDMI, the HDMI logo and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC.
 The illustrations used in this manual are of the KDL-
46X2000 unless otherwise stated.
FUSE
Introduction
Notice for Digital TV function
 
						

							3 GB
Table of Contents
Safety information ..................................................................................................................... 9
Precautions ............................................................................................................................. 12
Overview of the remote ........................................................................................................ 13
Overview of the TV buttons and indicators ........................................................................ 15
Watching TV............................................................................................................................ 16
Checking the Digital Electronic Programme Guide (EPG)  ............................................. 19
Using the Digital Favourite list  ....................................................................................... 21
Viewing pictures from connected equipment .......................................................................... 22
Navigating through menus ...................................................................................................... 23
Picture menu ........................................................................................................................... 24
Sound menu ............................................................................................................................ 27
Screen menu ........................................................................................................................... 29
Set-up menu............................................................................................................................ 31
AV Set-up menu ...................................................................................................................... 33
Analogue Set-up menu ...........................................................................................................35
Digital Set-up menu  ....................................................................................................... 38
PC Settings menu ................................................................................................................... 40
Connecting optional equipment............................................................................................... 42
Programming the remote ........................................................................................................ 44
Specifications .......................................................................................................................... 46
Troubleshooting ...................................................................................................................... 48
Index ....................................................................................................................................... 50
Start-up Guide 4
Watching TV
Using MENU Functions
Using Optional Equipment
Additional Information
 : for digital channels only
 
						

							4 GB
Start-up Guide
1: Checking the 
accessories
Remote RM-ED006 (1)
Size AA batteries (R6 type) (2)
Mains lead (Type BF) (1)
 For models with ferrite cores, do not remove these cores.
Coaxial cable (1)
PC cable (1)
Cable holder (1)
Support belt (1) and screws (2)
Stand (1) and screws (4) (only for KDL-40X2000)
To insert batteries into the remote
Notes
 Observe the correct polarity when inserting batteries.
 Do not use different types of batteries together or mix old 
and new batteries.
 Dispose of batteries in an environmentally friendly way. 
Certain regions may regulate disposal of the battery. 
Please consult your local authority.
 Handle the remote control with care. Do not drop or step 
on it, or spill liquid of any kind onto it.
 Do not place the remote control in a location near a heat 
source, or in a place subject to direct sunlight, or in a damp 
room.
To replace the bezel unit
The bezel unit can be replaced with others that are sold 
separately. However, do not remove the unit except to 
replace it. For details, see the instructions supplied 
with bezel units.
Do not remove these ferrite cores.
Do not remove these ferrite cores.
Push and slide to open.
 
						

							5 GB
Start-up Guide2: Attaching the stand 
(only for KDL-40X2000)
1Place the TV onto the stand by aligning the 
screw hole alignment lines over the stand 
as shown.
2Fix the TV to the stand using the supplied 
screws.
Notes
 This TV is very heavy, so two or more people should place 
the TV on the stand.
 If using an electric drill, set the tightening torque at 
approximately 1.5 N·m (15 Kgf·cm).
3: Connecting an aerial/
VCR
1
2
2
Connecting an aerial only
Connecting an aerial and VCR
Coaxial cable
(supplied)
Mains lead (supplied)
Scart lead (not supplied)
VCR Mains lead
(supplied)
Coaxial cable
(not supplied)Coaxial cable
(supplied)
 
						

							6 GB
4: Preventing the TV 
from toppling over
5: Bundling the cables
6: Selecting the 
language and country/
region
1Connect the TV to your mains socket 
(220-240 V AC, 50 Hz).
2Press 1 on the TV (right side).
When you switch on the TV for the first time, the 
Language menu appears on the screen.
2
3
11 2
3,4
3,4 2
 
						

							7 GB
Start-up Guide
When the TV is in standby mode (the 1 (standby) 
indicator on the TV (front) is red), press TV "/1 
on the remote to switch on the TV.
3Press F/f/G/g to select the language 
displayed on the menu screens, then press 
.
4Press F/f to select the country/region in 
which you will operate the TV, then press 
.
If the country/region in which you want to use the 
TV does not appear in the list, select “-” instead of 
a country/region.
The message confirming the TV start auto-tuning 
appears on the screen, then go to “7: Auto-tuning 
the TV”.
7: Auto-tuning the TV
The TV will search for and store all available TV 
channels.
1Before you start auto-tuning the TV, insert 
a pre-recorded tape into the VCR 
connected to the TV (page 5) and start play 
back.
The video channel will be located and stored on 
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.
2Press G/g to select “OK”, then press  .
The TV starts searching for all available digital 
channels, followed by all available analogue 
channels. This may take some time, please be 
patient and do not press any buttons on the TV or 
remote.
If a message appears for you to confirm the aerial 
connection
No digital or analogue channels were found. 
Check the aerial connection and press G/g to 
select “Yes”, then press   to start auto-tuning 
again.
4 2 2
Continued
 
						

							8 GB
3When the Programme Sorting menu 
appears on the screen, follow the steps of 
“Programme Sorting” (page 35).
If you do not change the order in which the analogue 
channels are stored on the TV, go to step 4.
4Press MENU to exit.
The TV has now tuned in all the available channels.
Note
When a digital broadcast channel cannot be received, or 
when selecting a region in which there are no digital 
broadcasts in step 4 (page 7) under “6: Selecting the 
language and country/region”, the time must be set after 
performing step 3.
 
						

							9 GB
Safety information
Mains lead
 Observe the followings to prevent the mains lead being 
damaged. If the mains lead is damaged, it may result in a 
fire or an electric shock.
– Unplug the mains 
lead when moving 
the TV set.
– When you 
disconnect the 
mains lead, 
disconnect it from 
the mains socket first.
– Be sure to grasp the plug when 
disconnecting the mains lead. Do 
not pull on the mains lead itself.
– Do not pinch, bend, or twist the 
mains lead excessively. The core 
conductors may be exposed or 
broken. 
– Do not modify the mains lead. 
– Do not put anything heavy on the 
mains lead.
– Keep the mains lead away from heat 
sources.
 If you damage the mains lead, stop 
using it and ask your dealer or Sony service centre to 
exchange it.
 Do not use the supplied mains lead on any other 
equipment.
 Use only an original Sony mains lead, not other brands.
Mains socket
 The TV set with a three-wire grounding 
type mains plug must be connected to a 
mains socket with a protective earthing 
connection.
 Do not use a poor fitting mains socket. 
Insert the plug fully into the mains socket. 
A poor fit may cause arcing and result in a 
fire. Contact your electrician to have the 
mains socket changed.
Cleaning the mains plug
Unplug the mains plug and clean it 
regularly. If the plug is covered with dust 
and it picks up moisture, its insulation may 
deteriorate and result in a fire.
Overloading
This TV set is designed to operate on 
a 220–240 V AC supply only. Take 
care not to connect too many 
appliances to the same mains socket 
as this could result in a fire or an electric shock.
When not in use
 If you will not be using the TV 
set for several days, the TV set 
should be disconnected from 
the mains for environmental 
and safety reasons.  The TV set is not disconnected from the mains when the 
TV set is switched off. To disconnect the TV set 
completely, pull the plug from the mains. However, some 
TV sets may have features which need the TV set to be left 
in standby to work correctly.
Carrying
 Before carrying the TV set, 
disconnect all the cables from the 
TV set.
 Carrying the large size TV set 
requires two or more people.
 When you carry the TV set by 
hand, hold the TV set as 
illustrated on the right. When 
lifting the TV set or moving the 
panel of the TV set, hold it firmly 
from the bottom. If you do not do 
so, the TV set may fall and be 
damaged or cause serious injury.
 When transporting it, do not 
subject the TV set to jolts or 
excessive vibration. The TV set 
may fall and be damaged or cause 
serious injury.
 If the TV set has been dropped or 
damaged, have it checked 
immediately by qualified service 
personnel.
 When you carry the TV set in for repair or when you move 
it, pack it using the original carton and packing material.
Placement
 The TV set should be installed near an easily accessible 
mains socket.
 Place the TV set on a stable, level surface. 
Do not hang anything on the TV set. If 
you do, the TV set may fall from the 
stand, causing damage or serious injury.
 Do not install the TV set in places subject 
to extreme temperature, for example in 
direct sunlight, or near a radiator, or heating vent. If the 
TV set is exposed to extreme temperature, the TV set may 
overheat and cause deformation of the casing or cause the 
TV set to malfunction.
 Do not install the TV set in a place exposed to direct air 
conditioning. If the TV set is installed in such a location, 
moisture may condense inside and may cause a 
malfunction.
 Never place the TV set in hot, oily, 
humid or excessively dusty places. 
 Do not install the TV set where 
insects may enter.
 Do not install the TV set where it 
may be exposed to mechanical vibration.
 Do not install the TV set in a location where it may 
protrude, such as on or behind a pillar, or where you might 
bump your head on it. Otherwise, it may result in injury.
 Do not allow children to climb on the TV 
set.
 If you use the TV set near the seashore, 
salt may corrode metal parts of the TV set 
and cause internal damage or fire.
KDL-46X2000/40X2000
KDL-52X2000
Continued
 
						

							10 GB
Ventilation
 Never cover the ventilation 
holes or insert anything in the 
cabinet. It may cause 
overheating and result in a  fire.
 Unless proper ventilation is provided, the TV set may 
gather dust and get dirty. For proper ventilation, observe 
the following:
– Do not install the TV set turned backwards or sideways. 
– Do not install the TV set turned over or upside down. 
– Do not install the TV set on a shelf or in a closet. 
– Do not place the TV set on a rug or bed. 
– Do not cover the TV set with cloth, such as curtains, or 
items such as newspapers, etc.
 Leave some space around the TV set as shown below. 
Otherwise, air-circulation may be inadequate and cause 
overheating, which may cause a fire or damage to the TV 
set.
Installed on the wall
Installed with stand
 Never install the TV set as follows:
Optional accessories
Observe the following when installing the TV set using a 
stand or wall-mount bracket. If you do not do so, the TV set 
may fall and cause serious injury. 
 It is strongly recommended that you use Sony accessories 
for safety reasons: 
– Wall-mount bracket SU-WL51
–TV stand SU-FL61
 It is strongly recommended that you use the official Sony 
wall-mount bracket to allow adequate air circulation and 
to avoid accumulated dust on the TV.
 If the TV set is to be installed on 
a wall, have the installation 
carried out by qualified service 
personnel. Improper installation 
may render the TV set unsafe.
 Secure the TV set properly, 
following the instructions supplied with your stand when 
installing the TV set.
 Be sure to attach the brackets supplied with your stand.
Wiring
 When wiring cables, be sure to unplug the mains lead for 
your safety.
 Take care not to catch your feet on the cables. It may 
damage the TV set.
Medical institutions
Do not place this TV set in a place 
where medical equipment is in 
use. It may cause a malfunction of 
medical instruments.
Outdoor use
 Do not install this TV set 
outdoors. If the TV set is 
exposed to rain, it may result in a 
fire or an electric shock.
 If this TV set is exposed to direct 
sunlight, the TV set may heat up 
and it may damage the TV set.
Vehicle, Ships and other 
vessels
 Do not install this TV set in a 
vehicle. The motion of the 
vehicle may cause the TV set to 
fall down and cause injury.
 Do not install this TV set on a 
ship or other vessel. If the TV set 
is exposed to seawater, it may 
cause a fire or damage the TV 
set.
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm 6 cm
Leave at least this space around the set.
Air circulation 
is blocked.Air circulation 
is blocked.
Wall Wall