Sony Kdl 40e4000 Operating Instructions

Printed in Spain3-298-243-12(2)
U
For useful information about Sony products
© 2008 Sony Corporation3-298-243-12(2)
U
LCD Digital Colour TV
Operating Instructions 
KDL-52W40xx
KDL-52W42xx
KDL-46W40xx
KDL-46W42xx
KDL-40W40xx
KDL-40W42xxKDL-32W40xx
KDL-32W42xx
KDL-40E40xx
KDL-32E40xx
KDL-26E40xx
KDL-37V45xxKDL-37V47xx
KDL-32V45xx
KDL-32V47xx
KDL-26V45xx
KDL-26V47xx
 

2 GB
NOTICE FOR 
CUSTOMERS IN THE 
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment 
for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 10 AMP 
fuse approved by ASTA or BSI to BS 1362 (i.e., marked with   
or  ) must be used.
When an alternative type of plug is used it should be fitted with a 10 
AMP FUSE otherwise the circuit should be protected by a 10 AMP 
FUSE at the distribution board.
If the plug supplied with this equipment...

3 GB
Table of Contents  
Start-up Guide 4Checking the accessories .................................................................................................... 4
Safety information ................................................................................................................ 9
Precautions ........................................................................................................................ 10
Overview of the remote...

4 GB
Start-up Guide
1: Checking the 
accessories
Mains lead (1) (only for KDL-52W4xxx, KDL-
46W4xxx, KDL-40W4xxx, KDL-40E4xxx)
Remote RM-ED011 (1)
Remote RM-ED011 W (1) (only for KDL-
40E4xxx, KDL-32E4xxx, KDL-26E4xxx)
Size AA batteries (R6 type) (2)
Stand (1) (except for KDL-52W4xxx, 
KDL-26E4xxx)
Screws for stand (4) (only for KDL-
46W4xxx, KDL-40W4xxx, KDL-40E4xxx, 
KDL-37V4xxx) 
Screws for stand (3) (only for KDL-
32W4xxx, KDL-32E4xxx, KDL-32V4xxx, 
KDL-26V4xxx)
To insert batteries into the remote
2:...

5 GB
Start-up Guide2Place the TV set on the stand. Take care not to 
interfere with cables.
3Fix the stand to the TV using the supplied 
screws.
~If using an electric screwdriver, set the tightening torque at 
approximately 1.5 N·m (15 kgf·cm)
3: Connecting an 
aerial/VCR/ DVD 
recorder
KDL-46W4xxx
KDL-40W4xxx
KDL-40E4xxx
KDL-37V4xxxKDL-32W4xxx
KDL-32E4xxx
KDL-32V4xxx
KDL-26V4xxx
Connecting an aerial/cable
Connecting an aerial/ cable/ VCR/ DVD recorder
Coaxial cable
Scart lead
VCR/ DVD recorder Coaxial...

6 GB
4: Preventing the TV 
from toppling over
1Install a wood screw (4 mm in diameter, not 
supplied) in the TV stand.
2Install a machine screw (M6 x 12, not 
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine screw 
with a strong cord.
5: Connecting the cables
6: Bundling the cables
7: Performing the initial 
set-up
1Connect the TV to your mains socket 
(220-240V AC, 50Hz).
2Press 1 on the TV.
When you switch on the TV for the first time, the 
Language menu appears on the...

7 GB
Start-up Guide4Press F/f to select the country/region in 
which you will operate the TV, then press  .
If the country/region in which you want to use 
the TV does not appear in the list, select “-” 
instead of a country/region.
5Press F/f to select the location type in which 
you will operate the TV, then press  .
~Sony recommends you to select “Home” for power saving.
This option selects the initial picture mode 
appropriate for the typical lighting condition in 
these enviroments.
8: Auto-tuning...

8 GB
To tune the TV for Cable connection
1Press .
2Press F/f to select “Quick Scan” or “Full 
Scan”, then press  .
Quick Scan : channels are tuned according to 
the cable operator information within the 
broadcast signal. 
Recommended setting for Frequency, 
Network ID and Symbol Rate is Auto.
This option is recommended for fast tuning 
when supported by your cable operator. 
If the Quick Scan does not tune, please use the 
Full Scan method below.
Full Scan : All available channels are tuned 
and stored....

9 GB
Safety information
Installation/Set-up
Install and use the TV set in accordance with the instructions below 
in order to avoid any risk of fire, electrical shock or damage and/or 
injuries.
InstallationsThe TV set should be installed near an easily accessible mains 
socket.
sPlace the TV set on a stable, level surface.
sOnly qualified service personnel should carry out wall 
installations.
sFor safety reasons, it is strongly recommended that you use 
Sony accessories, including:
- KDL-52W40xx/...

10 GB
NotessDo not use the supplied mains lead on any other equipment.
sDo not pinch, bend, or twist the mains lead excessively. The 
core conductors may be exposed or broken.
sDo not modify the mains lead.
sDo not put anything heavy on the mains lead.
sDo not pull on the mains lead itself when disconnecting the 
mains lead.
sDo not connect too many appliances to the same mains socket.
sDo not use a poor fitting mains socket.
Prohibited Usage
Do not install/use the TV set in locations, environments or...