Sony Kdl 40e4000 Operating Instructions
Have a look at the manual Sony Kdl 40e4000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Printed in Spain3-298-243-12(2) U For useful information about Sony products © 2008 Sony Corporation3-298-243-12(2) U LCD Digital Colour TV Operating Instructions KDL-52W40xx KDL-52W42xx KDL-46W40xx KDL-46W42xx KDL-40W40xx KDL-40W42xxKDL-32W40xx KDL-32W42xx KDL-40E40xx KDL-32E40xx KDL-26E40xx KDL-37V45xxKDL-37V47xx KDL-32V45xx KDL-32V47xx KDL-26V45xx KDL-26V47xx
2 GB NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. • Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and MPEG4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. The cable provider may charge an additional fee for such a service and you may be required to agree to their terms and conditions of business. Although this TV set follows DVB-T and DVB-C specifications, compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Some Digital TV functions may not be available in some countries/regions and DVB-C cable may not operate correctly with all providers. For more information about DVB-C functionality please see our cable support site: http://support.sony-europe.com/TV/DVBC / is a registered trademark of the DVB Project Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ~ The illustrations used in this manual are of the KDL-40W4000 unless otherwise state. The x that appear on the model name, correspond to numeric digits related to colour variation. Introduction Disposal of the TV set FUSE Notice for Digital TV function Trademark information HD3D Sound ViVA 010COV.book Page 2 Tuesday, June 17, 2008 12:53 PM
3 GB Table of Contents Start-up Guide 4Checking the accessories .................................................................................................... 4 Safety information ................................................................................................................ 9 Precautions ........................................................................................................................ 10 Overview of the remote ................................................................................................... 11 Overview of the TV buttons and indicators ................................................................... 12 Watching TV....................................................................................................................... 13 Checking the Guide .................................................................................................. 15 Using the Digital Favourite list .................................................................................. 16 Connecting optional equipment.......................................................................................... 17 Viewing pictures from connected equipment ..................................................................... 18 Using BRAVIA Sync (Control for HDMI) ............................................................................ 19 Overview of the TV Home Menu (XMB™) ......................................................................... 21 Settings .............................................................................................................................. 22 Picture .......................................................................................................................... 22 Sound ........................................................................................................................... 23 Features .......................................................................................................................24 Set-up ........................................................................................................................... 25 Analogue Set-up .......................................................................................................... 28 Digital Set-up ..................................................................................................... 29 Photo ................................................................................................................................. 32 Picture Frame ............................................................................................................... 32 USB Photo Viewer ....................................................................................................... 32 Specifications..................................................................................................................... 33 Troubleshooting .................................................................................................................36 Start-up Guide 4 Watching TV Using Optional Equipment Using MENU Functions Additional Information : for digital channels only GB Before operating the TV, please read the “Safety information” section of this manual. Retain this manual for future reference. 010COV.book Page 3 Tuesday, June 17, 2008 12:53 PM
4 GB Start-up Guide 1: Checking the accessories Mains lead (1) (only for KDL-52W4xxx, KDL- 46W4xxx, KDL-40W4xxx, KDL-40E4xxx) Remote RM-ED011 (1) Remote RM-ED011 W (1) (only for KDL- 40E4xxx, KDL-32E4xxx, KDL-26E4xxx) Size AA batteries (R6 type) (2) Stand (1) (except for KDL-52W4xxx, KDL-26E4xxx) Screws for stand (4) (only for KDL- 46W4xxx, KDL-40W4xxx, KDL-40E4xxx, KDL-37V4xxx) Screws for stand (3) (only for KDL- 32W4xxx, KDL-32E4xxx, KDL-32V4xxx, KDL-26V4xxx) To insert batteries into the remote 2: Attaching the stand (except for KDL-52W4xxx, KDL-26E4xxx) 1Open the carton box and take out the stand and the screws. Push and lift the cover to open. 010COV.book Page 4 Tuesday, June 17, 2008 12:53 PM
5 GB Start-up Guide2Place the TV set on the stand. Take care not to interfere with cables. 3Fix the stand to the TV using the supplied screws. ~If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm) 3: Connecting an aerial/VCR/ DVD recorder KDL-46W4xxx KDL-40W4xxx KDL-40E4xxx KDL-37V4xxxKDL-32W4xxx KDL-32E4xxx KDL-32V4xxx KDL-26V4xxx Connecting an aerial/cable Connecting an aerial/ cable/ VCR/ DVD recorder Coaxial cable Scart lead VCR/ DVD recorder Coaxial cableCoaxial cableTerrestrial signal or cable Terrestrial signal or cable 010COV.book Page 5 Tuesday, June 17, 2008 12:53 PM
6 GB 4: Preventing the TV from toppling over 1Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2Install a machine screw (M6 x 12, not supplied) into the screw hole of the TV. 3Tie the wood screw and the machine screw with a strong cord. 5: Connecting the cables 6: Bundling the cables 7: Performing the initial set-up 1Connect the TV to your mains socket (220-240V AC, 50Hz). 2Press 1 on the TV. When you switch on the TV for the first time, the Language menu appears on the screen. 3Press F/f/G/g to select the language displayed on the menu screens, then press . KDL-52W4xxx KDL-46W4xxx KDL-40W4xxx KDL-40E4xxx 3,4,5 GUIDE Česky Magyar Русский ББлгарски Suomi Dansk Svenska Norsk Slovenčina Română English Nederlands Français Italiano Deutsch Türkçe Español Català Português Polski Language BackSet Analogue 010COV.book Page 6 Tuesday, June 17, 2008 12:53 PM
7 GB Start-up Guide4Press F/f to select the country/region in which you will operate the TV, then press . If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. 5Press F/f to select the location type in which you will operate the TV, then press . ~Sony recommends you to select “Home” for power saving. This option selects the initial picture mode appropriate for the typical lighting condition in these enviroments. 8: Auto-tuning the TV 1Select OK then press . 2Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 8).The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connection and then press to start auto-tuning again. 3When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting”(page 28). If you do not change the order in which the analogue channels are stored on the TV, press RETURN to go to step 4. 4 For details, see page 24. 5 For details, see page 19. 6Press . The TV has now tuned in all the available channels. ~When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts, the time must be set after performing step 3. BackSet Analogue United Kingdom Ireland Nederland België/Belgique Luxembourg France Italia- Country Select country BackSet AnalogueLocation Home Shop Select location BackSet AnalogueAuto Tuning OK Cancel Do you want to start Auto Tuning? BackSet AnalogueQuick Start Ye sNo Do you want to enable Quick Start? T V turns on more quickly but standby power consumption is increased. BackSet AnalogueControl for HDMI Ye sNo Do you want to enable control for compatible HDMI devices? 010COV.book Page 7 Tuesday, June 17, 2008 12:53 PM
8 GB To tune the TV for Cable connection 1Press . 2Press F/f to select “Quick Scan” or “Full Scan”, then press . Quick Scan : channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for Frequency, Network ID and Symbol Rate is Auto. This option is recommended for fast tuning when supported by your cable operator. If the Quick Scan does not tune, please use the Full Scan method below. Full Scan : All available channels are tuned and stored. This procedure may take some time. This option is recommended when Quick Scan is not supported by your cable provider. For further information about supported cable providers, refer to support web site: http://support.sony-europe.com/TV/DVBC/ 3Press f to select “Start”, then press . The TV starts searching for channels. Do not press any buttons on the TV or remote. ~Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”. Detaching the Table- Top Stand from the TV ~Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. KDL-32W4xxx KDL-32E4xxx KDL-32V4xxx KDL-26V4xxxKDL-52W4xxx KDL-46W4xxx KDL-40W4xxx KDL-40E4xxx KDL-37V4xxx KDL-26E4xxx 010COV.book Page 8 Tuesday, June 17, 2008 12:53 PM
9 GB Safety information Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. InstallationsThe TV set should be installed near an easily accessible mains socket. sPlace the TV set on a stable, level surface. sOnly qualified service personnel should carry out wall installations. sFor safety reasons, it is strongly recommended that you use Sony accessories, including: - KDL-52W40xx/ KDL-52W42xx/ KDL-46W40xx/ KDL-46W42xx/ KDL-40W40xx/ KDL-40W42xx/ KDL-32W40xx/ KDL-32W42xx/ KDL-40E40xx/ KDL-32E40xx/ KDL-37V45xx/ KDL-37V47xx/ KDL-32V45xx/ KDL-32V47xx: Wall-Mount Bracket SU-WL500. -KDL-26V45xx/ KDL-26V47xx/ KDL-26E40xx: Wall-mount Bracket SU-WL100. -KDL-46W40xx/ KDL-46W42xx/ KDL-40W40xx/ KDL-40W42xx/ KDL-32W40xx/ KDL-32W42xx/ KDL-40E40xx/ KDL-32E40xx/ KDL-37V45xx/ KDL-37V47xx/ KDL-32V45xx/ KDL-32V47xx: TV stand SU-FL300M. sBe sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. TransportingsBefore transporting the TV set, disconnect all cables. sTwo or three people are needed to transport a large TV set. sWhen transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel. sWhen lifting or moving the TV set, hold it firmly from the bottom. sWhen transporting the TV set, do not subject it to jolts or excessive vibration. sWhen transporting the TV set for repair or when moving, pack it using the original carton and packing material. VentilationsNever cover the ventilation holes or insert anything in the cabinet. sLeave space around the TV set as shown below. sIt is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation. Installed on the wall Installed with stand sTo ensure proper ventilation and prevent the collection of dirt or dust: – Do not lay the TV set flat, install upside down, backwards, or sideways. – Do not place the TV set on a shelf, rug, bed or in a closet. – Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. – Do not install the TV set as shown below. Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only mains leads supplied by Sony, not other suppliers. – Insert the plug fully into the mains socket. – Operate the TV set on a 220–240 V AC supply only. – When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. – Disconnect the mains lead from the mains socket before working on or moving the TV set. – Keep the mains lead away from heat sources. – Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Mounting Hook Hook attachment on rear of TV set Screw (supplied with the Wall-mount bracket) 8 mm - 12 mm Be sure to hold the bottom of the panel, not the front part. Do not handle with dent area. Do not handle with the transparent bottom part. 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. 30 cm 10 cm 10 cm6 cm Leave at least this space around the set. Air circulation is blocked. Wall Wall Continued 010COV.book Page 9 Tuesday, June 17, 2008 12:53 PM
10 GB NotessDo not use the supplied mains lead on any other equipment. sDo not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken. sDo not modify the mains lead. sDo not put anything heavy on the mains lead. sDo not pull on the mains lead itself when disconnecting the mains lead. sDo not connect too many appliances to the same mains socket. sDo not use a poor fitting mains socket. Prohibited Usage Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location:Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke. Environment:Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV. Situation:Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from mains socket and aerial during lightning storms. Broken pieces: sDo not throw anything at the TV set. The screen glass may break by the impact and cause serious injury. sIf the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result. When not in use sIf you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons. sAs the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to disconnect the TV set completely. sHowever, some TV sets may have features that require the TV set to be left in standby to work correctly. For children sDo not allow children to climb on the TV set. sKeep small accessories out of the reach of children, so that they are not mistakenly swallowed. If the following problems occur... Turn off the TV set and unplug the mains lead immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel. When:– Mains lead is damaged. – Poor fitting of mains socket. – TV set is damaged by being dropped, hit or having something thrown at it. – Any liquid or solid object falls through openings in the cabinet. Precautions Viewing the TVsView the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes. sWhen using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result. LCD ScreensAlthough the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction. sDo not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged. sIf this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises. sGhosting may occur when still pictures are displayed continuously. It may disappear after a few moments. sThe screen and cabinet get warm when this TV set is in use. This is not a malfunction. sThe LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal. Handling and cleaning the screen surface/ cabinet of the TV set Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions. sTo remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. sNever use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material. sWhen adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand. Optional EquipmentKeep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur. BatteriessObserve the correct polarity when inserting batteries. sDo not use different types of batteries together or mix old and new batteries. sDispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority. sHandle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. sDo not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 010COV.book Page 10 Tuesday, June 17, 2008 12:53 PM