Home > Sony > Television > Sony Kdl 37s4000 Operating Instructions

Sony Kdl 37s4000 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Kdl 37s4000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11 GB
    Precautions
    Viewing the TVsView the TV in moderate light, as viewing the TV in poor light 
    or during long period of time, strains your eyes.
    sWhen using headphones, adjust the volume so as to avoid 
    excessive levels, as hearing damage may result.
    LCD ScreensAlthough the LCD screen is made with high-precision 
    technology and 99.99% or more of the pixels are effective, 
    black dots may appear or bright points of light (red, blue, or 
    green) may appear constantly on the LCD screen. This is a 
    structural property of the LCD screen and is not a malfunction.
    sDo not push or scratch the front filter, or place objects on top of 
    this TV set. The image may be uneven or the LCD screen may 
    be damaged.
    sIf this TV set is used in a cold place, a smear may occur in the 
    picture or the picture may become dark. This does not indicate 
    a failure. These phenomena disappear as the temperature rises.
    sGhosting may occur when still pictures are displayed 
    continuously. It may disappear after a few moments.
    sThe screen and cabinet get warm when this TV set is in use. 
    This is not a malfunction.
    sThe LCD screen contains a small amount of liquid crystal. 
    Mercury is sometimes contained depending on the kind of 
    fluorescent tubes. Follow your local ordinances and regulations 
    for disposal.
    Handling and cleaning the screen surface/
    cabinet of the TV set
    Be sure to unplug the AC power cord connected to the TV set from 
    AC power outlet before cleaning.
    To avoid material degradation or screen coating degradation, 
    observe the following precautions.
    sTo remove dust from the screen surface/cabinet, wipe gently 
    with a soft cloth. If dust is persistent, wipe with a soft cloth 
    slightly moistened with a diluted mild detergent solution.
    sNever use any type of abrasive pad, alkaline/acid cleaner, 
    scouring powder, or volatile solvent, such as alcohol, benzene, 
    thinner or insecticide. Using such materials or maintaining 
    prolonged contact with rubber or vinyl materials may result in 
    damage to the screen surface and cabinet material.
    sWhen adjusting the angle of the TV set, move it slowly so as to 
    prevent the TV set from moving or slipping off from its table 
    stand.
    Optional EquipmentKeep optional components or any equipment emitting 
    electromagnetic radiation away from the TV set. Otherwise picture 
    distortion and/or noisy sound may occur.
    Disposal of Old Electrical & Electronic 
    Equipment (Applicable in the European 
    Union and other European countries 
    with separate collection systems)
    This symbol is on the remote control.
     
    						
    							12 GB
    Remote Control and TV Controls/Indicators
    Remote control and TV controls
    ButtonDescription
    1"/1 
    — TV 
    standbyPress to turn the TV on or to switch to standby 
    mode.
    ~
     To disconnect the TV completely, turn off the 
    TV, then unplug the AC power cord from the 
    AC power.
    2 — Picture 
    freezePress to freeze the TV picture. The frozen picture 
    is displayed in full size, and a moving picture is 
    displayed in the small screen.
    To remove the small screen, press once. To return 
    to single picture mode, press again.
    ~
     This function is not available for a PC input 
    source.
    3AUDIOIn analogue mode: Press to change the dual sound 
    mode (page 27).
    In digital mode: Press to change the language to 
    be used for the programme currently being 
    viewed (page 33).
    4/ 
    — Input 
    select/Text 
    holdIn TV mode: Press to display a list of equipment 
    connected to the TV (page 21).
    In Text mode: Press to hold the current page.
    5
    F/f/G/g/ Press F/f/G/g to move the on-screen cursor. 
    Press   to select/confirm the highlighted item.
    Buttons on the TV will work the same as those on the remote 
    control.
    *In TV menu, these buttons will work as F/f/G/g/.
    z
    5, N, PROG + and AUDIO buttons have a tactile dot. 
    Use the tactile dots as a reference when operating the TV.
    **
    *
     
    						
    							13 GB
    6OPTIONSPress to display a list that contains “Twin Picture” 
    (page 22), “PIP” (page 22), “Device Control”, or 
    shortcuts to some setting menus (page 26). Use 
    the “Device Control” menu to operate equipment 
    that is compatible with control for HDMI.
    The listed options vary depending on the input 
    source.
    7HOMEPress to display the TV Home menu (page 25).
    8Number 
    buttonsIn TV mode: Press to select channels. For 
    channel numbers 10 and above, press the next 
    digit quickly.
    In Text mode: Press to enter a page number.
    9 
     — FavouritePress to display the Digital Favourite List that 
    you have specified (page 19).
    0PROG +/–/
    /In TV mode: Press to select the next (+) or 
    previous (–) channel.
    In Text mode: Press to select the next ( ) or 
    previous ( ) page.
    qaPress to return to the channel that was last viewed 
    (for more than five seconds).
    qs% — MutePress to mute the sound. Press again to restore the 
    sound.
    z
     In standby mode, if you want to turn on the TV 
    without sound, press this button.
    qd2 +/– 
    — VolumePress to adjust the volume.
    qf/ 
    — TextPress to display text information (page 16).
    qgColoured 
    buttonsWhen the coloured buttons are available, an 
    operation guide appears on the screen. Follow the 
    operation guide to perform a selected operation 
    (page 16, 18, 19).
    qhRETURNPress to return to the previous screen of the 
    displayed menu.
    (Continued)
     
    						
    							14 GB
    qjGUIDE / 
    — EPGPress to display the Digital Electronic 
    Programme Guide (EPG) (page 18).
    qkDIGITAL/
    ANALOGSwitches between digital and analogue modes.
    ql 
    — Twin 
    Picture/PIPDisplays two pictures simultaneously (page 22).
    w;/ 
    — Info/Text 
    revealIn digital mode: Displays details of the 
    programme currently being viewed.
    In analogue mode: 
    Displays information. Press 
    once to display the current channel number and 
    screen mode. Press again to display clock 
    information. Press a third time to remove the display 
    from the screen.
    In Text mode (page 16): Reveals hidden 
    information (e.g. answers to a quiz).
    waPress to change the Wide Mode (page 17).
    wsBRAVIA 
    Syncm/N/X/M/x: You can operate the 
    BRAVIA Sync-compatible equipment that is 
    connected to the TV.
    SYNC MENU: Displays the menu of connected 
    HDMI equipment. While viewing other input 
    screens or TV programmes, “HDMI Device 
    Selection” is displayed when the button is 
    pressed.
    THEATRE: You can set Theatre Mode on or off. 
    When Theatre Mode is set to on, the optimum 
    audio output (if the TV is connected with an 
    audio system using an HDMI cable) and picture 
    quality for film-based contents are automatically 
    set.
    z
     If you turn the TV off, Theatre Mode is also 
    turned off.
    ~
     Control for HDMI (BRAVIA Sync) is only 
    available with the connected Sony equipment 
    that has the BRAVIA Sync logo or is 
    compatible with control for HDMI.
     
    						
    							
    15 GB
    ~
    • Make sure that the TV is completely turned off before unplugging the AC power cord. Unplugging the AC power cord while the TV is turned on may cause the indicator to remain lit or may cause the TV to 
    malfunction.
    The operation guide provides help on how to operate the TV using the remote, and is displayed at 
    the bottom of the screen. Use the remote buttons shown on the operation guide.
    Indicators
    IndicatorDescription
    1    — Picture 
    Off / Timer Lights up in green when you select “Picture Off” (page 28).
    Lights up in orange when you set the timer (page 28).
    2 1 — Standby Lights up in red when the TV is in standby mode.
    3 " — Power Lights up in green when the TV is on.
    Flashes while the remote is being operated.
    4 Remote control 
    sensor/Light 
    sensor Receives IR signals from the remote.
    Do not put anything over the sensor. The sensor may not operate properly.
    About the operation guide on the TV screen
    Operation Guide
    Example: Press   or 
    RETURN (see 5 on page 12 or  qh on page 13).
     
    						
    							16 GB
    Watching TV
    Watching TV
    1Press 1 on the TV to turn on the TV.
    When the TV is in standby mode (the 1 
    (standby) indicator on the TV front panel 
    is red), press "/1 on the remote to turn on 
    the TV.
    2Press DIGITAL/ANALOG to switch 
    between digital and analogue modes.
    The available channels vary depending on 
    the mode.
    3Press the number buttons or PROG +/– to 
    select a TV channel.
    To select channel numbers 10 and above 
    using the number buttons, enter the next 
    digit quickly.
    To select a digital programme using the 
    Digital Electronic Programme Guide 
    (EPG), see page 18.
    In digital mode, an information banner 
    appears briefly. Each time you press 
    / , the banner changes cyclically as 
    follows: 
    Current programme information t Next 
    programme information t No banner
    The following icons may be indicated on 
    the banner.
    : Radio service
    : Scrambled/Subscription service
    : Subtitles available
    : Subtitles available for the hearing 
    impaired
    : Multiple audio languages available
    : Parental Lock
    : Parental rating
    To access Text
    Press /. Each time you press /, the display 
    changes cyclically as follows:
    Te x t  t Text over the TV picture (mix mode) 
    t No Text (exit the Text service)
    To select a page, press the number buttons or 
    /.
    To hold a page, press 
    /.
    To reveal hidden information, press 
    /.
    z
     When four coloured items appear at the bottom of 
    the Text page, you can access pages quickly and 
    easily (Fast Text). Press the corresponding 
    coloured button to access the page.
    AUDIO
    GUIDE
    THEATRE
    BRAVIA Sync
    SYNC MENU
    RETURN
    2
    3
    3
     
    						
    							17 GB
    Watching TV
    To change the Wide Mode manually
    Press   repeatedly to select the desired Wide 
    Mode.
    * Parts of the top and bottom of the picture may be cut off. 
    You can adjust the vertical position of the picture. Press 
    F/f to move the picture up or down (e.g. to read 
    subtitles).
    ~
     When you select “Wide Zoom”, some characters 
    and/or letters at the top and the bottom of the 
    picture may not be visible. In such a case, adjust 
    “Vertical Size” in the “Screen Settings” menu 
    (page 29).
    z
     When “Auto Wide” (page 29) is set to “On”, the 
    TV automatically selects the best mode to suit the 
    broadcast.
     If 720p, 1080i or 1080p source pictures are 
    displayed with black borders on the screen edges, 
    select “Wide Zoom” or “Zoom” to adjust the 
    pictures.For PC input
    Wide Zoom*
    Enlarges the centre 
    portion of the picture. The 
    left and right edges of the 
    picture are stretched to fill 
    the 16:9 screen.
    Normal
    Displays the 4:3 picture in 
    its original size. Side bars 
    are shown to fill the 16:9 
    screen.
    Full
    Stretches the 4:3 picture 
    horizontally, to fill the 
    16:9 screen.
    Zoom*
    Displays the 
    cinemascopic (letter box 
    format) picture in the 
    correct proportion.
    14:9*
    Displays the 14:9 picture 
    in the correct proportion. 
    As a result, side bars are 
    shown on the screen.
    Full 1
    Stretches the original 
    picture to fill the screen 
    vertically.
    Full 2
    Stretches the “Full 1” 
    picture horizontally to fill 
    the 16:9 screen.
     
    						
    							18 GB
    Using the Digital Electronic Programme Guide (EPG) * 
    1In digital mode, press GUIDE.
    2Perform the desired operation as shown in 
    the following table or displayed on the 
    screen.
    * This function may not be available in some regions.
    Digital Electronic Programme Guide (EPG)
    ToDo this
    View a programme Press F/f/G/g to select a programme, then press  .
    Turn off the EPG Press GUIDE.
    Sort programme information by 
    category
    – Category list
    1Press the blue button.
    2Press F/f to select a category, then press  .
    Set a programme to be displayed 
    automatically on the screen when it 
    starts 
    – Reminder
    1Press F/f/G/g to select a future programme you want to display, 
    then press  / .
    2Press F/f to select “Reminder”, then press  .
    A c symbol appears next to the programme’s information. The 
      indicator on the TV front panel lights up in orange.
    ~
     If you switch the TV to standby mode, the TV will automatically 
    turn on when the programme starts. 
    Cancel a reminder – Timer list
    1Press / .
    2Press F/f to select “Timer list”, then press  .
    3Press F/f to select the programme you want to cancel, then 
    press .
    4Press   to select “Cancel Timer”.
    A display appears to confirm that you want to cancel the 
    programme.
    5Press G/g to select “Yes”, then press  .
     
    						
    							19 GB
    Watching TV
    Using the Digital Favourite List * 
    You can specify up to four of your favourite 
    channel lists.
    1In digital mode, press  .
    2Perform the desired operation as shown in 
    the following table or displayed on the 
    screen.
    * This function may not be available in some regions.Digital Favourite List
    ToDo this
    Create a Favourite list for the first 
    time1Press the yellow button to select the Favourite list.
    2Press F/f/G/g to select the channel you want to add, then press 
    .
    A   symbol appears next to channels that you have stored in 
    the Favourite list.
    Watch a channel
    1Press the yellow button to select a Favourite list.
    2Press F/f to select a channel, then press  .
    Turn off the Favourite list Press RETURN.
    Add or remove channels in a 
    Favourite list
    1Press the blue button.
    2Press the yellow button to select the Favourite list to edit.
    3Press F/f to select the channel to add or remove, then press  .
    Remove all channels from a Favourite 
    list
    1Press the blue button.
    2Press the yellow button to select the Favourite list to edit.
    3Press the blue button.
    4Press G/g to select “Yes”, then press  .
     
    						
    							20 GB
    Using Optional Equipment
    Connecting Optional Equipment
    You can connect a wide range of optional equipment to your TV.
    For service use only
    Digital still camera
    Camcorder
    USB storage media
    Camcorder
    Headphones
    CamcorderDVD player Audio system
    PC (HDMI-output)
    PC
    Hi-Fi audio 
    equipment
    Home theatre system 
    with digital input Video game 
    equipment
    DVD playerDVD recorder DVD player with 
    component output
    VCR
    VCRBlu-ray disc player
     
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Kdl 37s4000 Operating Instructions