Sony Kdl 32e5520 Operating Instructions
Have a look at the manual Sony Kdl 32e5520 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\090MEN.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Menu Functions Programme SortingChanges the order of analogue channels stored in the TV. 1Press F/f to select the channel you want to move to a new position, then press . 2Press F/f to select the new position for the channel, then press . Programme LabelsAssigns a channel name of your choice, up to five letters or numbers. The name appears briefly on the screen when you select the channel. (Names for channels are usually taken automatically from Text (if available).) 1Press F/f to select the channel you want to name, then press . 2Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you enter a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 3Repeat step 2 until you finish entering the name. 4Press to exit the labeling procedure. Intelligent Picture On with IndicatorAutomatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. OnAutomatically reduces the picture noise. OffTurns off the “Intelligent Picture” feature. Manual Programme PresetTo preset a channel, press PROG +/– to select the programme number, before selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You cannot select a programme number that is set to “Skip” (page 42). Programme/ System/ChannelAllows you to preset programme channels manually. 1Press F/f to select “Programme”, then press . 2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press . 3Press F/f to select “System”, then press . 4Press F/f to select one of the following TV broadcast systems, then press . B/G: For western European countries/areas I: For the United Kingdom D/K: For eastern European countries/areas L: For France 5Press F/f to select “Channel”, then press . 6Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. 7Tune the channels as follows: If you do not know the channel number (Frequency) Press F/f to search for the next available channel. The search stops when a channel is found. To continue searching, press F/f. If you know the channel number (Frequency) Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your VCR. 8Press to jump to “Confirm”, then press . Repeat the above procedure to preset other channels manually. (Continued)
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\090MEN.fmmasterpage:Left 42 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) LabelAssigns a name of your choice to the selected channel. This name appears briefly on the screen when you select the channel. To input characters, follow steps 2 to 4 in “Programme Labels” (page 41). AFTAllows you to fine-tune the selected channel manually if you feel that a slight tuning adjustment may improve picture quality. When “On” is selected, fine tuning adjustments are made automatically. Audio FilterImproves the sound of individual channels when distortion occurs in mono broadcasts (normally set to “Off”). ~ • You cannot receive stereo or dual sound when “Low” or “High” is selected. SkipSkips unused analogue channels when you press PROG +/– to select channels. To select channels you have programmed to skip, use the corresponding number buttons. LNAImproves the picture quality of the channel (noisy picture) when the broadcast signal is very weak. ConfirmSaves changes you have made to the “Manual Programme Preset” settings. Digital Set-up Subtitle Set-up Subtitle SettingWhen set to “For Hard Of Hearing”, visual aids for the hearing impaired are displayed with the subtitles (when such visual aids are available). Preferred LanguageAllows you to select the language of the subtitles. Audio Set-up Audio TypeSwitches to broadcast for the hearing impaired when you select “For Hard Of Hearing”. Preferred LanguageSets the language to be used for a programme. Some digital channels may broadcast several audio languages for a programme. Audio DescriptionProvides audio description (narration) of visual information, when such information is available. Mixing LevelAdjusts the TV main audio and “Audio Description” output levels. Dynamic RangeCompensates for differences in the audio level between different channels (only for Dolby Digital audio). ~ • The effect may not function or may vary depending on the programme regardless of the “Dynamic Range” setting. MPEG Audio LevelAdjusts the MPEG audio sound level. Digital Tuning Digital Auto TuningTunes in the available digital channels. You can retune the TV after moving house, or to search for newly launched channels.
43 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\090MEN.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Menu Functions Programme SortingAllows you to remove or change the order of digital channels stored in the TV. 1Press F/f to select the channel you want to remove or move to a new position. 2Remove or change the order of the digital channels as follows: To remove a digital channel Press . After a confirmation message appears, press G to select “Yes”, then press . To change the order of the digital channels Press g, then press F/f to select the new position for the channel and press G. 3Press RETURN. Digital Manual TuningTunes the digital channels manually. This feature is available when “Digital Auto Tuning” is set to “Antenna”. 1Press the number buttons to enter the channel number you want to tune, or press F/f. 2When the available channels are found, press F/f to select the channel you want to store, then press . 3Press F/f to select the channel number where you want to store the new channel, then press . Repeat the above procedure to tune other channels. LNAImproves the picture quality of the channel (noisy picture) when the broadcast signal is very weak. Radio DisplayDisplays the screen wallpaper when you listen to a radio broadcast. You can select the screen wallpaper colour, display a random colour or view a slideshow (page 25, 30). To cancel the screen wallpaper display temporarily, press any button. Parental LockSets an age restriction to viewing. To view any programme rated for ages above the age you specify, enter the correct PIN code. PIN CodeEnter your PIN code to activate “Parental Lock”. You can also change the PIN code. z • PIN code 9999 is always accepted. Technical Setup Auto Service UpdateEnables the TV to detect and store new digital services as they become available. System UpdateEnables the TV to automatically receive free software updates through your existing aerial/antenna/cable (when issued). We recommend that you leave the setting to “On” at all times. System InformationDisplays the current software version and the signal level. Time ZoneAllows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/ area. Auto DSTSelect “On” to automatically switch between summer time and winter time according to the calendar. Service Replacement Select “On” to automatically change the channel when broadcaster changes transmission of the viewing programme to a different channel. Programme Guide (only when GUIDE Plus+ is available)You can switch GUIDE (Sony Guide or GUIDE Plus+). If you change Sony Guide to GUIDE Plus+ programme, go to (page 17, 20).
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\090MEN.fmmasterpage:Left 44 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) CA Module Set-upProvides access to a pay TV service after you obtain a Conditional Access Module (CAM) and a view card. See the location of the (PCMCIA) socket (page 22). Network Settings Network IP Address SettingsManual Allows you to set the network settings according to your network environment. DHCP (DNS manual) Automatically acquires the network settings except for DNS server settings. You can manually set the DNS settings. DHCP (DNS automatic) Automatically acquires the network settings through the Dynamic Host Configuration Protocol server function of the router or Internet service provider. TestDiagnoses whether the network is correctly connected. IP Address/ Subnet Mask/ Default Gateway/ Primary DNS/ Secondary DNSYou need to configure each item when “Manual” is selected in “IP Address Settings”. When “DHCP (DNS manual)” is selected, be sure to enter “Primary DNS” and “Secondary DNS” server addresses manually. MAC AddressDisplays the “MAC address”, which is a fixed, globally unique identifier of the network device. Server Display SettingsDisplays the connected server list and allows you to select the server you want to display on the Home Menu. Server DiagnosticsDiagnoses whether the TV can connect to each server on the home network. Renderer FunctionEnables playback of photo/music/video files on the TV through other control devices on the network, such as a digital still camera or mobile phone. Renderer Access ControlAllows you to specify the accessible controller to the TV. When this setting is set to “On”, you can playback Photo/Music/Video files on the TV using the controller. Renderer Set-up Automatic Access PermissionAllows you to select whether to permit access to the TV automatically when a network device accesses the TV for the first time. Renderer NameAllows you to set the name of the TV to be shown on the controller.
45 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Additional Information Additional Information Installing the Accessories (Wall-Mount Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately). • Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. • Refer to “Detaching the Table-Top Stand from the TV” (page 7). • Refer to “TV installation dimensions table” (page 46). • Refer to “Screw and Hook locations diagram/table” (page 47). ~ • Place the TV on the Table-Top Stand, when securing the Mounting Hook. Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. Mounting Hook Square holeScrew (+PSW 6 × 16)
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left 46 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Unit: cm Figures in the above table may differ slightly depending on the installation. The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 48) for its weight. TV installation dimensions table Model Name Display dimensionsScreen centre dimensionLength for each mounting angle Angle (0°)Angle (20°) AB CDEFGH KDL-52V55/56xx126.2 82.2 3.9 47.8 16.9 40.7 77.8 51.5 KDL-52W55xx126.2 82.3 3.9 47.8 16.9 40.9 77.8 51.5 KDL-46V55/56xx112.3 72.3 8.4 47.1 15.0 35.8 68.5 50.2 KDL-46W55/57xx112.3 72.5 8.4 47.1 15.0 35.9 68.6 50.3 KDL-46WE5112.3 72.5 8.4 47.1 16.7 37.6 68.6 50.9 KDL-40V55/56xx98.7 63.6 12.2 46.3 14.7 32.8 60.4 49.3 KDL-40W55/57xx98.7 63.8 12.2 46.3 14.7 33.0 60.4 49.3 KDL-40WE598.7 63.8 12.2 46.3 16.4 34.7 60.4 49.9 KDL-40E55xx101.6 64.3 12.2 45.1 14.8 33.8 61.1 48.5 KDL-37V55/56xx91.7 60.0 14.0 46.3 14.5 31.4 57.0 49.3 KDL-37W55/57xx91.7 60.2 14.0 46.3 14.5 31.6 57.0 49.3 KDL-32V55/56xx79.8 53.6 17.2 46.3 14.3 29.1 51.1 49.2 KDL-32W55/57xx79.8 53.7 17.2 46.3 14.3 29.2 51.1 49.2 KDL-32E55xx82.7 53.9 17.2 45.1 14.5 29.9 51.3 48.3 Screen centre point WARNING
47 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Additional Information Screw and Hook locations diagram/table Model NameScrew locationHook location KDL-52V55/56xx d, g b KDL-52W55xx d, g b KDL-46V55/56xx d, g b KDL-46W55/57xx d, g b KDL-46WE5 d, g b KDL-40V55/56xx d, g b KDL-40W55/57xx d, g b KDL-40WE5 d, g b KDL-40E55xx d, g b KDL-37V55/56xx d, g b KDL-37W55/57xx d, g b KDL-32V55/56xx e, g c KDL-32W55/57xx e, g c KDL-32E55xx e, g c Screw location When installing the Mounting Hook on the TV.Hook location When installing the TV onto the Base Bracket. b a c
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left 48 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Specifications System Panel system LCD (Liquid Crystal Display) Panel TV systemAnalogue: Depending on your country/area selection: B/G/H, D/K, L, I Digital: DVB-T/DVB-C Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4 Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41 D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69 Digital: VHF/UHF Sound output10 W + 10 W Input/Output jacks Aerial/Antenna cable 75 ohm external terminal for VHF/UHF / AV121-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video output. // AV221-pin scart connector (CENELEC standard) including audio/video input, RGB input and selectable audio/ video output. COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/ PR/CR: 0.7 Vp-p, 75 ohms COMPONENT INAudio input (phono jacks) HDMI IN1, 2, 3, 4Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital Analogue audio input (minijack) (HDMI IN1 only) PC Input (page 50) AV3Video input (phono jack) AV3Audio input (phono jacks) DIGITAL AUDIO OUT (OPTICAL) Digital optical jack (Two channel linear PCM, Dolby Digital) Audio output (phono jacks) PC INPC Input (D-sub 15-pin) (page 50) G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/ R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p PC audio input (minijack) USB port iHeadphones jack CAM (Conditional Access Module) slot LAN10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)
49 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Additional Information *Specified standby power is reached after the TV finishes necessary internal processes. Design and specifications are subject to change without notice. Model nameKDL- 52V55/56xx, 52W55xxKDL- 46V55/56xx, 46W55/57xx, 46WE5KDL- 40V55/56xx, 40W55/57xx, 40WE5, 40E55xxKDL- 37V55/56xx, 37W55/57xxKDL- 32V55/56xx, 32W55/57xx, 32E55xx Power and others Power requirements 220 V – 240 V AC, 50 Hz Screen size (measured diagonally)52 inches / Approx. 132 cm46 inches / Approx. 117 cm40 inches / Approx. 102 cm37 inches / Approx. 94 cm32 inches / Approx. 81 cm Display resolution1,920 dots (horizontal) × 1,080 lines (vertical) Power consumptionin “Home”/ “Standard” mode195 W (KDL- 52V55/56xx) 199 W (KDL- 52W55xx)162 W (KDL- 46V55/56xx) 172 W (KDL- 46W55/57xx) 98 W (KDL- 46WE5)137 W (KDL- 40V55/56xx) 131 W (KDL- 40W55/57xx, 40E55xx) 88 W (KDL- 40WE5)132 W (KDL- 37V55/56xx) 140 W (KDL- 37W55/57xx)89 W (KDL- 32V55/56xx) 81 W (KDL- 32W55/57xx, 32E55xx) in “Shop”/ “Vivid” mode257 W (KDL- 52V55/56xx) 261 W (KDL- 52W55xx)206 W (KDL- 46V55/56xx) 221 W (KDL- 46W55/57xx) 141 W (KDL- 46WE5)179 W (KDL- 40V55/56xx) 172 W (KDL- 40W55/57xx, 40E55xx) 121 W (KDL- 40WE5)169 W (KDL- 37V55/56xx) 179 W (KDL- 37W55/57xx)109 W (KDL- 32V55/56xx) 99 W (KDL- 32W55/57xx, 32E55xx) Standby power consumption*0.17 W (17 W when “Quick Start” is set to “On”) Supplied accessoriesSee “To check the accessories” (page 4). Optional accessoriesWall-Mount BracketSU-WL500 Model nameKDL- 52V55/56xx, 52W55xxKDL- 46V55/56xx, 46W55/57xx, 46WE5KDL- 40V55/56xx, 40W55/57xx, 40WE5, 40E55xxKDL- 37V55/56xx, 37W55/57xxKDL- 32V55/56xx, 32W55/57xx, 32E55xx Dimensions (Approx.) (w × h × d) with Table- Top Stand 126.2 x 86.9 x 35.8 cm (KDL-52V55/56xx) 126.2 x 87.1 x 35.8 cm (KDL-52W55xx)112.3 x 77.1 x 33.0 cm (KDL-46V55/56xx) 112.3 x 77.2 x 33.0 cm (KDL-46W55/57xx, 46WE5)98.7 x 68.4 x 30.3 cm (KDL-40V55/56xx) 98.7 x 68.6 x 30.3 cm (KDL-40W55/57xx, 40WE5) 101.6 x 68.0/66.3 (high/low) x 30.3 cm (KDL-40E55xx)91.7 x 64.8 x 30.3 cm (KDL-37V55/56xx) 91.7 x 64.9 x 30.3 cm (KDL-37W55/57xx)79.8 x 58.4 x 25.9 cm (KDL-32V55/56xx) 79.8 x 58.5 x 25.9 cm (KDL-32W55/57xx) 82.7 x 57.7/55.9 (high/ low) x 25.9 cm (KDL- 32E55xx) without Table- Top Stand126.2 x 82.2 x 11.5 cm (KDL-52V55/56xx) 126.2 x 82.3 x 11.5 cm (KDL-52W55xx)112.3 x 72.3 x 9.6 cm (KDL-46V55/56xx) 112.3 x 72.5 x 9.6 cm (KDL-46W55/57xx) 112.3 x 72.5 x 10.7 cm (KDL-46WE5)98.7 x 63.6 x 9.3 cm (KDL-40V55/56xx) 98.7 x 63.8 x 9.3 cm (KDL-40W55/57xx) 98.7 x 63.8 x 10.4 cm (KDL-40WE5) 101.6 x 64.3 x 9.8 cm (KDL-40E55xx)91.7 x 60.0 x 9.1 cm (KDL-37V55/56xx) 91.7 x 60.2 x 9.1 cm (KDL-37W55/57xx)79.8 x 53.6 x 8.9 cm (KDL-32V55/56xx) 79.8 x 53.7 x 8.9 cm (KDL-32W55/57xx) 82.7 x 53.9 x 9.4 cm (KDL-32E55xx) Mass (Approx.) with Table- Top Stand 35.0 kg (KDL-52V55/ 56xx) 35.5 kg (KDL- 52W55xx)27.0 kg (KDL-46V55/ 56xx) 27.5 kg (KDL-46W55/ 57xx, 46WE5)20.5 kg (KDL-40V55/ 56xx, 40E55xx) 21.0 kg (KDL-40W55/ 57xx, 40WE5)18.0 kg (KDL-37V55/ 56xx) 18.5 kg (KDL-37W55/ 57xx)14.5 kg (KDL-32V55/ 56xx, 32E55xx) 15.0 kg (KDL-32W55/ 57xx) without Table- Top Stand30.5 kg (KDL-52V55/ 56xx) 31.0 kg (KDL- 52W55xx)23.5 kg (KDL-46V55/ 56xx) 24.0 kg (KDL-46W55/ 57xx, 46WE5)17.5 kg (KDL-40V55/ 56xx) 18.0 kg (KDL-40W55/ 57xx, 40WE5, 40E55xx)15.0 kg (KDL-37V55/ 56xx) 15.5 kg (KDL-37W55/ 57xx)12.0 kg (KDL-32V55/ 56xx) 12.5 kg (KDL-32W55/ 57xx, 32E55xx)
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fmmasterpage:Left 50 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4 * 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”. ~ • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced). ResolutionHorizontal frequency (kHz)Vertical frequency (Hz)StandardSignalsHorizontal (Pixel) ×Vertical (Line) VGA 640×48031.560VESA 640×48037.575VESA 720×40031.570VESA SVGA 800×60037.960VESA 800×60046.975VESA XGA 1024×76848.460VESA 1024×76856.570VESA 1024×76860.075VESA WXGA 1280×72045.060EIA 1280×76847.460VESA 1280×76847.860VESA 1280×96060.060VESA 1360×76847.760VESA SXGA 1280×102464.060VESA HDTV 1920×108066.660VESA* 1920×108067.560EIA*