Sony Kdl 32e5520 Operating Instructions
Have a look at the manual Sony Kdl 32e5520 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\060WAT.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Watching TV Using the Favourite List Analogue FavouritesThe Favourite feature lets you select programmes from a list of up to 16 favourite channels that you specify. 1In analogue mode, press . 2Perform the desired operation as shown in the following table or displayed on the screen. Digital FavouritesYou can specify up to four of your favourite channel lists. 1In digital mode, press . 2Perform the desired operation as shown in the following table or displayed on the screen. Analogue Favourite List ToDo this Watch a channel Press . Turn off the Favourite list Press . Add a current channel to the Favourite listPress F/f to select “Add to Favourites”, then press . Remove a channel from the Favourite list 1Press F/f to select “Edit Favourites”, then press . The “Favourite Set-up” screen appears. 2Press F/f to select the channel number, then press . 3Press F/f to select “– –”, then press . Digital Favourite List ToDo this Turn off the Favourite list Press RETURN. Add or remove channels in a Favourite list 1Press the blue button. Go to step 2 when you add channels for the first time or the Favourite list is empty. 2Press the yellow button to select the Favourite list to edit. 3Press F/f/G/g to select the channel to add or remove, then press . Watch a channel 1Press the yellow button to select a Favourite list. 2Press F/f to select a channel, then press . Remove all channels from a Favourite list 1Press the blue button. 2Press the yellow button to select the Favourite list to edit. 3Press the blue button. 4Press G/g to select “Yes”, then press .
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left 22 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Optional Equipment Connecting Optional Equipment You can connect a wide range of optional equipment to your TV. Connecting audio-video equipment (quality order, high to low) Connect toConnect withDescription 5, 9, qa HDMI IN 1, 2, 3, or 4HDMI cableDigital video and audio signals are input from the connected equipment. In addition, when you connect the equipment that is compatible with Control for HDMI, communication with the connected equipment is supported (page 40). If the equipment has a DVI socket/jack, connect the DVI socket/jack to the HDMI IN 1 socket/jack through a DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets/jacks to the audio in sockets/ jacks in the HDMI IN 1 sockets/jacks. ~ • Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high speed type). • When connecting an audio system that is compatible with Control for HDMI, be sure to also connect it to the DIGITAL AUDIO OUT (OPTICAL) socket/jack. qs qd 0 qa 8 9 7 12 354 6
23 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Optional Equipment 3 / COMPONENT INComponent video cable, audio cable 2 /AV1, // AV2SCART cableWhen you connect an analogue decoder, the TV tuner outputs scrambled signals to the decoder, and the decoder unscrambles the signals before outputting them. qs AV3, and AV3Composite video cableWhen connecting a mono equipment, connect to the AV3 L socket. Connecting audio/portable equipment Connect toConnect withDescription 1 Audio cableYou can listen to TV sound on the connected Hi-Fi audio equipment. 4 DIGITAL AUDIO OUT (OPTICAL)Optical audio cableYou can listen to TV sound on the connected Home theatre system with digital input. 8 USB USB cableYou can enjoy photo/music/video files stored in a Sony digital still camera or camcorder (page 25). Connecting other equipment Connect toConnect withDescription 6 / PC IN PC cable with ferrites, audio cableIt is recommended to use a PC cable with ferrites, such as the “Connector, D-sub 15” (ref. 1-793-504-11, available in Sony Service Centre), or an equivalent. 7 LAN LAN cableYou can enjoy contents stored in DLNA-compatible devices via a network (page 28). 0 CAM (Conditional Access Module)Provides access to pay TV services. For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the “dummy” card from the CAM slot, then turn off the TV and insert your CAM card into the slot. When you are not using the CAM, we recommend that you keep the “dummy” card in the CAM slot. z •Do not insert the smart card directly into the TV CAM (Conditional Access Module) slot. It must be fitted into the Conditional Access Module provided by your authorised dealer. ~ • CAM is not supported in some countries/areas. Check with your authorised dealer. qd i HeadphonesYou can listen to TV sound through headphones. Connect toConnect withDescription
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left 24 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Viewing Pictures from Connected Equipment Turn on the connected equipment, then perform the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned VCR In analogue mode, press PROG +/– or the number buttons, to select the video channel. To view two pictures simultaneously – PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. ~ • This function is not available for a PC input. 1Press OPTIONS. 2Press F/f to select “PIP/ PAP”, then press . 3Press F/f to select “PAP”, then press . The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right. 4Press the number buttons or PROG +/– to select the TV channel. To return to single picture mode Press RETURN.To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. 1Press OPTIONS. 2Press F/f to select “PIP/ PAP”, then press . 3Press F/f to select “PIP”, then press . The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen. You can use F/f to change the position of the TV programme screen. 4Press the number buttons or PROG +/– to select a TV channel. To return to single picture mode Press RETURN. z • You can switch the audible picture by pressing G/ g. 1Press . 2Press F/f to select the desired input source, then press .
25 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Optional Equipment Playing back Photo/Music/ Video via USB You can enjoy photo/music/video files stored in a Sony digital still camera or camcorder through a USB cable or USB storage device on your TV. 1Connect a supported USB device to the TV. 2Press HOME. 3Press G/g to select “Photo”, “Music”, or “Video”. 4Press F/f to select a USB device, then press . The file or folder list appears. To display a thumbnail list, press the yellow button while the list is displayed. 5Press F/f to select a file or folder, then press . When you select a folder, select a file, then press . Playback starts. Photo Playback Auto Start The TV automatically starts photo playback when the TV is turned on and a digital still camera or other device storing photo files is connected to the USB port then turned on (page 39). ~ • While the TV is accessing the data on the USB device, observe the following: – Do not turn off the TV or connected USB device. – Do not disconnect the USB cable. – Do not remove the USB device. The data on the USB device may be damaged. • Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV. • Playback does not start automatically if the TV is turned on after connecting the digital still camera or other device to the USB port. • You can register the background music to be played during a slideshow using Photo by pressing OPTIONS, then select “Add to Slideshow” while playing back music.• USB playback is supported for the following photo file formats: – JPEG (JPEG format files with the extension “.jpg” and conforming to DCF 2.0 or Exif 2.21) – RAW (ARW/ARW 2.0 format files with the extension “.arw”. For preview only.) • USB playback is supported for the following music file format: – MP3 (files with the extension “.mp3” that have not been copyrighted) • USB playback is supported for the following video file format: – MPEG1 (files with the extension “.mpg”) • Photo Playback Auto Start works only for photo files in the newest digital still camera folder (DCF-compliant, highest-numbered “DCIM” folder). • Playback may not start automatically when some digital still cameras (such as cameras with internal memory) are connected. • The file name and folder name support only English. • When you connect a Sony digital still camera, set the camera’s USB connection mode to Auto or “Mass Storage”. For more information about USB connection mode, refer to the instructions supplied with your digital camera. • Check the website below for updated information about compatible USB devices. http://support.sony-europe.com/TV/compatibility/ • Use a USB storage device that is compliant with USB Mass Storage Class standards. To display a photograph — Picture Frame You can display a photograph on the screen for a selected period of time. After that period, the TV automatically switches itself into standby mode. 1Select a photograph. You can select a photograph from the connected USB device or preset picture folder. For details on selecting a photograph (page 25). 2Press OPTIONS while the selected photograph is displayed, then press F/f to select “Picture Frame Image” and press . 3Press RETURN repeatedly to return to the Home Menu. 4Press G/g to select “Photo”, then select “Picture Frame” and press . (Continued)
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left 26 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) The TV is switched to Picture Frame mode, and the selected photograph is displayed on the screen. To set the duration of displaying a photograph Press OPTIONS, then select “Duration” and press . Then, select the duration, and press . The counter appears on the screen. To return to the XMB™ Press RETURN. ~ • If the photograph is selected from a USB device, it must remain connected to the TV. • If “Sleep Timer” is activated, the TV automatically will switch into standby mode. To display a photograph with the location on the map When using a digital still camera with GPS function, it is possible to display a photograph with a map of the location where the photograph was taken using a function of GPS for recording longitude and latitude. Because map information is downloaded from the Internet online map service, the network connection must be required and the TV has to be connected to the network (page 28). 1Select a photograph (page 25). 2Press the green/red buttons to zoom in/out on the map. To change the display position of the map on the TV screen, press the blue button repeatedly. ~ • Because the Internet online map service is provided by a third party, service may be changed or terminated without prior notification to the user. • The position indicated on the map may differ depending on the digital still camera. • Only a large-scale map that cannot be zoomed in or out is displayed if the TV is not connected to the Internet or the Internet online map service is terminated. z • A map can be displayed in the case of photograph’s Exif data includes a date information, and the associated longitude and latitude information (“Log files”) has been recorded using a Sony GPS unit. Follow the procedure described below. 1Connect the GPS unit to the USB port. 2Press HOME. 3Press G/g to select “Photo”. 4Press F/f to select the GPS unit, then press . 5Select the following items using F/f, then set them using G/g. –Time Zone –DST 6Select “OK”, then press . The GPS log files are loaded. 7Disconnect the GPS unit and connect the device on which the photograph is stored. 8Select a photograph (page 25). 9Press the green/red buttons to zoom in/out on the map.
27 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\070OPT.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Optional Equipment Using BRAVIA Sync with Control for HDMI The Control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with Control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. Control for HDMI • Automatically turns the connected equipment off when you switch the TV to standby mode using the remote. • Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play. • If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. • Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: –m/N/X/M/x to operate the connected equipment directly. –SYNC MENU to display the menu of the connected HDMI equipment on the screen. After displaying the menu, you can operate the menu screen by using F/f/G/g, , colour buttons, and RETURN. –OPTIONS to display “Device Control”, then select options from “Options” and “Content List” to operate the equipment. – Refer to the instruction manual of the equipment for available control. • If “Control for HDMI” of the TV is set to “On”, “Control for HDMI” of the connected equipment is also automatically switched to “On”.To connect the equipment that is compatible with Control for HDMI Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) jack of the TV and the audio system using an optical audio cable (page 22). To make the Control for HDMI settings The Control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” (page 40) for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment.
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\080NET.fmmasterpage:Left 28 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Home Network Features With this TV, you can enjoy contents stored in DLNA-compatible devices on the home network. Devices that store and provide contents, such as photo/music/video files, are called “Server”. The TV receives the photo/music/ video files from the server via the network, and you can enjoy them on the TV even in other rooms. To enjoy the home network, a DLNA- compatible device (VAIO, Cyber-shot, etc.) is necessary as a server. In addition, when you connect your TV to the Internet, you can enjoy displaying a photograph that shows its location on the map (page 26), or enjoy AppliCast while watching a TV programme (page 29). ~ • You will need to contract with an Internet service provider to connect to the Internet. Connecting to the Network Network cable (not supplied) Broadband router DSL modem/ Cable modem To network devices Internet TV Network cable (not supplied)
29 GB C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\080NET.fmmasterpage:Left KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Using Home Network Features Enjoying AppliCast While watching TV, you can display variety of information on the edge of TV screen by using Widgets (i.e. mini-applications). Many Widgets retrieve information from the Internet. To Use Widgets Widgets can be displayed by selecting from the Home Menu. While the Widget is displayed, you can add to your Widget list so that it would be registered to be automatically displayed next time when you launch AppliCast. Some Widgets allow you to save settings to provide you with the preferred information. 1Press HOME. 2Press G/g to select Network. 3Press F/f to select the desired Widget to be displayed or simply select AppliCast icon to display your preferred list of Widgets. 4Follow the instruction on the Widget. To return to single picture mode Press RETURN. To Add or remove Widgets in AppliCast You can add to or remove from the Widget list. From Widget: 5While you are displaying the Widget, press OPTIONS. 6Select Add to AppliCast or Remove from AppliCast. Up to 30 Widgets can be registered in AppliCast. From Network in the Home Menu: 7Follow STEP1-2 above. 8Press F/f to select the desired Widget, then press OPTIONS. 9Follow STEP6. z • There are three Widgets already in the set that dont require internet connection. They are How to use AppliCast, Analogue Clock, and Calendar.• AppliCast Widgets stored in the USB Mass Storage Device connected to BRAVIA. The Widget icons should appear under USB icon under Network in the Home Menu. ~ • MAC address and IP address are transmitted automatically from the TV to servers while internet connection is available. The servers are under the control of Sony and MAC address will never be transmitted to the servers controlled by the other parties. • Widgets may be changed or terminated without prior notification to the user. (Continued)
C:\Documents and Settings\All Users\Documentos\SONY TELES\00 MARTA_DTP IMDB\EX2L\4136111141\4136111141\080NET.fmmasterpage:Left 30 GB KDL-52/46/40/37/32V5500 x-xxx-xxx-xx(x) Enjoying Photo/Music/ Video Files via the Network You can enjoy photo/music/video files on the server easily by selecting an icon on the Home Menu of the TV. 1Press HOME. 2Press G/g to select “Photo”, “Music”, or “Video”. 3Press F/f to select a server, then press . The file or folder list appears. To display the thumbnail list, press the yellow button while the list is displayed. When the server cannot be found See “Checking the Network Connection” (page 31) and “Adjusting the Server Display Settings” (page 31). 4Press F/f to select a file or folder, then press . When you select a folder, select a file, then press . Playback starts. z • A map can be displayed with a photograph in the case of longitude and latitude information has been recorded to photograph’s Exif data (page 26). ~ • Depending on the network device, it may be necessary to register the TV with the network device. • Picture quality may appear coarse when using Photo because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio. • Some photo files may take some time to be displayed when using Photo. • To play files that are received from a network device, they need to conform to one of the following file formats. – Still images: JPEG format – Music: MP3 format or linear PCM format – Video: The following file formats stored on the server: AVCHD, HDV, MPEG2-PS (which in some cases may not be able to be played) Depending on the network device, the file format may be converted before transfer. In such cases, the file format resulting after conversion is used for playback. For details, refer to the instruction manual for the network device being used. Even files conforming to one of the file formats given above cannot be played in some cases. • The file name and folder name support only English. To enjoy photographs, music and videos on the TV screen by operating devices – Renderer Renderer is a feature for playing photo, music and video files stored in network devices (digital still cameras, mobile phones, etc.) on the TV by operating the controller device in question. To use this feature, a renderer- compatible device such as a digital still camera or mobile phone is required as the controller. Refer as well to the instruction manual supplied with the controller. 1Set “Renderer Function”, “Renderer Access Control” and “Renderer Set-up” in “Network Settings” if necessary (page 44). 2Play the file selected using the controller on the TV. The file is played on the TV over the connected network. Use the controller or the TV’s remote to perform operations during playback. ~ • You can register the background music to be played during a slideshow using Photo. While playing back music, press OPTIONS, then select “Add to Slideshow”.