Home > Sony > Television > Sony Kdl 26s4000 Operating Instructions

Sony Kdl 26s4000 Operating Instructions

Here you can view all the pages of manual Sony Kdl 26s4000 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 31

31 GB
Using MENU Functions
HDMI Set-upAllows the TV to communicate with the connected “Control for HDMI” 
compatible equipment. Note that communication settings must also be made on the 
connected equipment.
Control for HDMISets whether or not to link the operations of the TV and the 
connected equipment that is compatible with control for 
HDMI. When set to “On”, the following menu items can be 
performed.
If the specific Sony equipment that is compatible with control 
for HDMI is connected, this...

Page 32

32 GB
Programme SortingChanges the order of analogue channels stored in the TV.
1Press F/f to select the channel you want to move to a new position, then press 
.
2Press F/f to select the new position for the channel, then press  .
Programme BlockBlocks an individual channel from being watched.
1Press F/f to select the channel you want to block, then press  .
2Press F/f to select “Block”, then press  .
To watch the channel, select “Allow”.
Intelligent Picture On with IndicatorAutomatically reduces the...

Page 33

33 GB
Using MENU Functions
Colour SystemSelects the colour system (“Auto”, “PAL”, “SECAM”) 
according to the channel.
Signal LevelDisplays the signal level for programme currently being 
watched.
Digital Set-up 
Digital Tuning Digital Auto 
TuningTunes in the available digital channels.
You can retune the TV after moving house, or to search for 
newly launched channels.
Programme 
SortingAllows you to remove or change the order of digital channels 
stored in the TV.
1Press F/f to select the channel you...

Page 34

34 GB
Optical OutSelects the audio signal that is output from the DIGITAL 
AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set 
to “Auto” when equipment compatible with Dolby Digital is 
connected, and set to “PCM” when noncompatible equipment 
is connected.
Radio DisplayDisplays the screen wallpaper when you listen to a radio broadcast. You can select 
the screen wallpaper colour, display a random colour or view a slide show 
(page 23). To cancel the screen wallpaper display temporarily, press any...

Page 35

35 GB
Additional Information
Additional Information
Specifications
Model nameKDL-20S4000KDL-26S4000KDL-32S4000KDL-37S4000
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: B/G, I, D/K
Digital: DVB-T
Colour/video systemAnalogue: PAL, PAL60, SECAM, NTSC3.58/4.43 (only video input)
Digital: MPEG-2 MP@ML/HL
Channel coverageAnalogue:
B/G: VHF: E2 to E12 / UHF: E21 to E69 /CATV: S01 to S03, S1 to S41
VHF:  0 to 12, 5A, 9A / UHF: 28 to 69 /CATV: S01 to S03, S1 to S44 (Australia only)...

Page 36

36 GB
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
PC input signal reference chart for PC IN   (RGB) jack
~
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you 
will see the message “NO SYNC”.
PC input signal reference chart for HDMI IN 1, 2, 3 jack...

Page 37

37 GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated. 
1Count how many times the 1 (standby) indicator flashes between each two second break.
For example, the indicator may flash three times, go off for two seconds, then flash again three 
times.
2Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony 
service centre of how the...

Page 38

38 GB
Sound
The picture is good, but there 
is no sound.• Press 
2 +/–  or % (Mute).
 Check if the “Speaker” is set to “TV Speaker” (page 30).
 When using HDMI input with Super Audio CD or DVD-Audio,  DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your desired 
channel.  Switch between digital and analogue mode, and select the desired 
digital/analogue channel.
Some channels are blank.  The channel is for scrambled/subscription service only. Subscribe to a  pay TV...

Page 39


				            

Page 40

Printed in Malaysia
3-876-434-12(2)
Customer Support:
 
Start reading Sony Kdl 26s4000 Operating Instructions

Related Manuals for Sony Kdl 26s4000 Operating Instructions

All Sony manuals