Sony Kdl 26s4000 Operating Instructions

							31 GB
Using MENU Functions
HDMI Set-upAllows the TV to communicate with the connected “Control for HDMI” 
compatible equipment. Note that communication settings must also be made on the 
connected equipment.
Control for HDMISets whether or not to link the operations of the TV and the 
connected equipment that is compatible with control for 
HDMI. When set to “On”, the following menu items can be 
performed.
If the specific Sony equipment that is compatible with control 
for HDMI is connected, this setting is applied to the 
connected equipment automatically when the “Control for 
HDMI” is set to “On” using the TV.
Auto Devices OffWhen this is set to “On”, the connected equipment that is 
compatible with control for HDMI turns off when you switch 
the TV to standby mode using the remote.
Auto TV OnWhen this is set to “On”, the TV turns on when you turn on 
the connected equipment that is compatible with control for 
HDMI.
Device List 
UpdateCreates or updates the “HDMI Device List”. Up to 11 
compatible equipment items can be connected, and up to 5 
equipment items can be connected to a single jack. Be sure to 
update the “HDMI Device List” when you change the 
connections or settings. If the specific Sony equipment that is 
compatible with control for HDMI is connected, “Control for 
HDMI” is applied to the connected equipment automatically 
when the “Device List Update” is executed on the TV.
HDMI Device ListDisplays the connected “Control for HDMI” compatible 
equipment.
~
 You cannot use “Control for HDMI” if the TV operations are linked to the 
operations of an audio system that is compatible with control for HDMI.
Product InformationDisplays product information of the TV.
Factory SettingsResets all settings to factory settings except for the “Programme Block” setting, 
“Digital Favourites” setting, and programme preset data. After completing this 
process, the initial set-up screen is displayed. Completing auto tuning in initial set-
up will reset the settings that are not reset by “Factory Settings”. To retain the 
settings, select “Cancel” in the auto tuning confirmation dialog.
~
 Do not turn off the TV or press any buttons during “Factory Settings” (takes 
about 30 seconds).
Analogue Set-up
Programme List 
DisplaySelect “Off” to hide the list of analogue channels from the XMB™ 
(XrossMediaBar).
1 Digit DirectSelect “On” to select a channel using one preset number button (0 – 9) on the 
remote.
~
 When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and 
above entering two digits using the remote.
Auto TuningTunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched 
channels. 
(Continued)
 
						

							32 GB
Programme SortingChanges the order of analogue channels stored in the TV.
1Press F/f to select the channel you want to move to a new position, then press 
.
2Press F/f to select the new position for the channel, then press  .
Programme BlockBlocks an individual channel from being watched.
1Press F/f to select the channel you want to block, then press  .
2Press F/f to select “Block”, then press  .
To watch the channel, select “Allow”.
Intelligent Picture On with IndicatorAutomatically reduces the picture noise. The signal level bar 
is displayed when the channel is changed or the display is 
changed from an input screen to a TV programme.
OnAutomatically reduces the picture noise.
OffTurns off the “Intelligent Picture” feature.
Manual Programme 
PresetBefore selecting “Label”/“AFT”/“LNA”/“Audio Filter”/“Skip”/“Colour System”, 
press PROG +/– to select the programme number with the channel. You cannot 
select a programme number that is set to “Skip”.
Programme/
TV System/
FrequencyPresets programme channels manually.
1Press F/f to select “Programme”, then press  .
2Press F/f to select the programme number you want to 
manually tune (if tuning a VCR, select programme 0), 
then press  .
3Press F/f to select “TV System”, then press  .
4Press F/f to select the best received TV broadcast 
systems, then press  .
5Press F/f to select “Frequency”, then press  .
6Press G/g to search for the next available channel. The 
frequency band (“VHF Low”, “VHF High” or “UHF”) 
is changed accordingly.
LabelAssigns a name of your choice, up to five letters or numbers, 
to the selected channel. This name appears briefly on the 
screen when you select the channel. 
AFTAllows you to fine-tune the selected channel manually if you 
feel that a slight tuning adjustment may improve picture 
quality.
You can adjust the fine tuning over a range of –15 to +15. 
When “On” is selected, fine tuning adjustments are made 
automatically.
LNAImproves the picture quality of the channel (noisy picture) 
when the broadcast signal is very weak.
If you cannot see any improvement in the picture quality even 
if you set to “On”, set this option to “Off” (factory setting).
Audio FilterImproves the sound of individual channels when distortion 
occurs in mono broadcasts. Sometimes a non-standard 
broadcast signal can cause sound distortion or intermittent 
sound muting in mono programmes.
If you do not experience any sound distortion, we recommend 
that you leave this option to “Off” (factory setting).
~
 You cannot receive stereo or dual sound when “Low” or 
“High” is selected.
SkipSkips unused analogue channels when you press PROG +/– 
to select channels. To select channels you have programmed 
to skip, use the corresponding number buttons.
 
						

							33 GB
Using MENU Functions
Colour SystemSelects the colour system (“Auto”, “PAL”, “SECAM”) 
according to the channel.
Signal LevelDisplays the signal level for programme currently being 
watched.
Digital Set-up 
Digital Tuning Digital Auto 
TuningTunes in the available digital channels.
You can retune the TV after moving house, or to search for 
newly launched channels.
Programme 
SortingAllows you to remove or change the order of digital channels 
stored in the TV.
1Press F/f to select the channel you want to remove or 
move to a new position.
2Remove or change the order of the digital channels as 
follows:
To remove the digital channel
Press  . After a confirmation message appears, press G 
to select “Yes”, then press  .
To change the order of the digital channels
Press g, then press F/f to select the new position for the 
channel and press G.
3Press RETURN.
Digital Manual 
TuningTunes the digital channels manually.
1Press the number buttons to enter the channel number 
you want to tune, then press F/f.
2When the available channels are found, press F/f to 
select the channel you want to store, then press  .
3Press F/f to select the channel number where you want 
to store the new channel, then press  .
Repeat the above procedure to tune other channels.
Subtitle Set-up Subtitle SettingWhen set to “For Hard Of Hearing”, visual aids for the 
hearing impaired are displayed with the subtitles (when such 
visual aids are available).
Subtitle 
LanguageAllows you to select the language of the subtitles.
Audio Set-up Audio TypeSwitches to broadcast for the hearing impaired when you 
select “For Hard Of Hearing”.
Audio LanguageSets the language to be used for a programme. Some digital 
channels may broadcast several audio languages for a 
programme.
Audio 
DescriptionProvides audio description (narration) of visual information, 
when such information is available.
Mixing LevelAdjusts the TV main audio and Audio Description output 
levels.
z
 This option is only available when “Audio Description” is 
set to “On”.
Dynamic RangeCompensates for differences in the audio level between
different channels. Note that this function may have no effect 
for some channels.
(Continued)
 
						

							34 GB
Optical OutSelects the audio signal that is output from the DIGITAL 
AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set 
to “Auto” when equipment compatible with Dolby Digital is 
connected, and set to “PCM” when noncompatible equipment 
is connected.
Radio DisplayDisplays the screen wallpaper when you listen to a radio broadcast. You can select 
the screen wallpaper colour, display a random colour or view a slide show 
(page 23). To cancel the screen wallpaper display temporarily, press any button.
Parental LockSets a parental guidance level. Programmes that exceed the set level can only be 
watched after entering the correct PIN code.
1Press the number buttons to enter your PIN code.
If you have not already set a PIN code, a PIN code entry screen appears. 
Follow the instructions in “PIN Code” below.
2Press F/f to select the level you want to set (refer to the table below), then 
press .
3Press RETURN.
Level Function
Block All All programmes need a password to view. 
G and above To lock “General” and above programmes.
PG and above  To lock “Parental Guidance” and above programmes.
M and above To lock “Mature” and above programmes. 
MA and above To lock “Mature Adult” and above programmes.
AV and above To lock “Adult/Violence” and above programmes.
R and above  To lock “Restricted” and above programmes.
No block No programmes need a password to view.
PIN Code To set a PIN for the first time
1Press the number buttons to enter a PIN code.
2Press RETURN.
To change your PIN
1Press the number buttons to enter your PIN code.
2Press the number buttons to enter a new PIN code.
3Press RETURN.
z
 PIN code 9999 is always accepted.
Technical Set-up Auto Service 
UpdateEnables the TV to detect and store new digital services as 
they become available.
System UpdateEnables the TV to automatically receive free software 
updates through your existing antenna (when issued). We 
recommend that you leave the setting to “On” at all times.
System 
InformationDisplays the current software version and the signal level.
 
						

							35 GB
Additional Information
Additional Information
Specifications
Model nameKDL-20S4000KDL-26S4000KDL-32S4000KDL-37S4000
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: B/G, I, D/K
Digital: DVB-T
Colour/video systemAnalogue: PAL, PAL60, SECAM, NTSC3.58/4.43 (only video input)
Digital: MPEG-2 MP@ML/HL
Channel coverageAnalogue:
B/G: VHF: E2 to E12 / UHF: E21 to E69 /CATV: S01 to S03, S1 to S41
VHF:  0 to 12, 5A, 9A / UHF: 28 to 69 /CATV: S01 to S03, S1 to S44 (Australia only)
VHF:  1 to 11 / UHF: 21 to 69 /CATV: S01 to S03, S1 to S41(New Zealand only)
I:  UHF: B21 to B69 / CATV: S01 to S03, S1 to S41
D/K: VHF: C1 to C12, R1 to R12 /UHF: C13 to C57, R21 to R60 /CATV: S01 to S03, S1 
to S41, Z1 to Z39
Digital:VHF/UHF
Sound output5 W + 5 W 10 W + 10 W
Input/Output jacks
Antenna
75 ohm external terminal for VHF/UHF
1S video input (4-pin mini DIN)
1, 2, 3Video input (phono jack)
1, 2, 3Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
1/ 2Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/
PR/CR: 0.7 Vp-p, 75 ohms
HDMI IN 1, 2, 3Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
 Analogue audio input (minijack): 500 mVrms, Impedance: 47 kilohms (HDMI IN 3 only)
Video output (phono jack)
DIGITAL AUDIO OUT (OPTICAL) (digital optical jack)/Audio output (phono jacks)
PC IN   (RGB)PC Input (D-sub 15-pin) (see page 36)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
 PC audio input (minijack)
iHeadphones jack
USB port
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured 
diagonally)20 inches (Approx. 
50.9 cm)26 inches (Approx. 
66.1 cm)32 inches (Approx. 
80.0 cm)37 inches (Approx. 
94.0 cm)
Display resolution1,366 dots (horizontal) × 768 lines (vertical)
Power consumptionIndicated on the rear of the TV.
Dimensions*
(w × h × d)(with Table-
Top Stand)529 × 396 × 169 mm 675 × 511 × 242 mm 809 × 584 × 242 mm 931 × 656 × 279 mm
(without Table-
Top Stand)529 × 393 × 99 mm 675 × 466 × 97 mm 809 × 542 × 99 mm 931 × 609 × 110 mm
Mass* (with Table-
Top Stand)9 kg 13 kg 17 kg 21 kg
(without Table-
Top Stand)8 kg 10 kg 14 kg 18 kg
Supplied accessoriesSee “1: Checking the accessories” on page 4.
(Continued)
 
						

							36 GB
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
PC input signal reference chart for PC IN   (RGB) jack
~
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you 
will see the message “NO SYNC”.
PC input signal reference chart for HDMI IN 1, 2, 3 jack
Optional accessories— SU-WL100 Wall-
Mount BracketSU-WL500/SU-WL50B Wall-Mount Bracket
SU-FL300M TV stand
Resolution
Horizontal 
frequency (kHz)Vertical 
frequency (Hz)StandardSignalsHorizontal 
(Pixel) ×Vertical 
(Line)
VGA
640×48031.560VGA
640×48037.575VESA
720×40031.570VGA-T
SVGA
800×60037.960VESA Guidelines
800×60046.975VESA
XGA
1024×76848.460VESA Guidelines
1024×76856.570VESA
1024×76860.075VESA
WXGA
1280×76847.460VESA
1280×76847.860VESA
1280×76860.375
1360×76847.760VESA
SXGA
1280×102464.060VESA
ResolutionHorizontal 
frequency (kHz)Vertical 
frequency (Hz)StandardSignalsHorizontal 
(Pixel) ×Vertical 
(Line)
VGA
640×48031.560VESA
SVGA
800×60037.960VESA Guidelines
XGA
1024×76848.460VESA Guidelines
WXGA
1280×76847.460VESA
1280×76847.860VESA
SXGA
1280×102464.060VESA
Model nameKDL-20S4000KDL-26S4000KDL-32S4000KDL-37S4000
 
						

							37 GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated. 
1Count how many times the 1 (standby) indicator flashes between each two second break.
For example, the indicator may flash three times, go off for two seconds, then flash again three 
times.
2Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony 
service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1Check the items in the tables below.
2If the problem persists, have your TV serviced by qualified service personnel.
ConditionExplanation/Solution
Picture
There is no picture (screen is 
dark) and no sound. Check the antenna connection.
 Connect the TV to the AC power, and press 1 on the TV.
 If the 1 (standby) indicator lights up in red, press "/1.
No picture or menu 
information from equipment 
connected to the video input 
jack appears on the screen. Press / to display the list of connected equipment, then select the 
desired input.
 Check the connection between the optional equipment and the TV.
Ghosting occurs, or double 
images appear. Check the antenna connection.
 Check the antenna location and direction.
Only snow and noise appear 
on the screen. Check if the antenna is broken or bent.
 Check if the antenna has reached the end of its serviceable life (three to 
five years for normal use, one to two years when used at the seaside).
The picture is distorted (dotted 
lines or stripes appear). Keep the TV away from electrical noise sources such as cars, 
motorcycles, hair-dryers, or optical equipment.
 When installing optional equipment, leave some space between the 
optional equipment and the TV.
 Check the antenna connection.
 Keep the antenna TV cable away from other connecting cables.
There is picture or sound noise 
when viewing a TV channel. Adjust “AFT” (Automatic Fine Tuning) to obtain better picture 
reception (page 32).
Tiny black points and/or 
bright points appear on the 
screen The screen is composed of pixels. Tiny black points and/or bright points 
(pixels) on the screen do not indicate a malfunction.
The picture contours are 
distorted. Select “Auto” in “Cinema Drive” (page 28).
The picture is not displayed in 
colour. Select “Reset” (page 26).
The picture from equipment 
connected to the  1 or 2 
jacks is not displayed in 
colour, or is displayed in 
irregular colours. Check the connection of the  1 or 2 jacks and check if the jacks are 
firmly seated in their respective jacks.
(Continued)
 
						

							
38 GB
Sound
The picture is good, but there 
is no sound.• Press 
2 +/–  or % (Mute).
 Check if the “Speaker” is set to “TV Speaker” (page 30).
 When using HDMI input with Super Audio CD or DVD-Audio,  DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your desired 
channel.  Switch between digital and analogue mode, and select the desired 
digital/analogue channel.
Some channels are blank.  The channel is for scrambled/subscription service only. Subscribe to a  pay TV service.
 The channel is used only for data (no picture or sound).
 Contact the broadcaster for transmission details.
You cannot view digital 
channels.  Contact a local installer to find out if digital transmissions are provided 
in your area.
 Upgrade to a higher gain antenna.
General
The TV turns off 
automatically (the TV enters 
standby mode).  Check if the “Sleep Timer” is activated, or confirm the “Duration” 
setting of “On Timer Settings” (page 28).
 If no signal is received and no operation is performed in the TV mode for 
10 minutes, the TV automatically switches to standby mode.
The TV turns on 
automatically.  Check if the “On Timer Settings” is activated (page 28).
Some input sources cannot be 
selected.  Select “Video Labels” and cancel the “Skip” setting for the input source 
(page 30).
The remote does not function.  Replace the batteries.
You cannot add a channel to 
the Favourite list.  Up to 999 channels can be stored in the Favourite list.
HDMI equipment does not 
appear on “HDMI Device 
List”.  Check that your equipment is compatible with control for HDMI.
You cannot select “Off” in 
“Control for HDMI”.  If you have connected any audio system that is compatible with control 
for HDMI, you cannot select “Off” in this menu. If you want to change 
the audio output to the TV speaker, select “TV Speaker” in the 
“Speaker” menu (page 30).
Not all channels are tuned for 
cable.  Check the support website for cable provide information.
http://www.sony-asia.com/bravia/flash.html
The auto tuning procedure 
takes a long time.  If you have connected the VCR to the TV, we recommend inserting a 
pre-recorded tape into a VCR before you start auto tuning for fast tuning.
Cancel the auto tuning, and insert a pre-recorded tape into a VCR 
connected to the TV. Then select “Auto Start-up” (page 29) to make the 
initial set-up again.
ConditionExplanation/Solution
 
						

							
Printed in Malaysia
3-876-434-12(2)
Customer Support: