Sony F 35 User Manual

101List of Items Stored in Files
  Chapter 5   Storage and Retrieval of User Setting Data


Enter 1024 output values in ascending order, each on a 
separate line.
Example
Monitor LUT cannot be used with the gammas of the 
STANDARD and HYPER GAMMA categories, as they 
are intended for checking an image as-is.
OHB file
The OHB file stores the offset values of items specific to 
the CCD unit.
For file operation, use the  page of the FILE 
menu. You can also use the MSU-900/950 Master Setup 
Unit for this...

102List of Items Stored in Files
  Chapter 5   Storage and Retrieval of User Setting Data

(P08)DETAIL ON/OFFaa
LEVELaa
LIMITER Maa
LIMITER WHTaa
LIMITER BLKaa
CRISPaa
LV L  D E Paa
LVL DEP ON/OFFaa

(P09)H/V RATIOaa
FREQaa
MIX RATIOaa
KNEE APTaa
KNEE APT ON/OFFaa

(P10)SKIN DTL ON/OFFaa
PHASEaa
WIDTHaa
SATaa
LEVELaa

(P11)R-Gaa
R-Baa
G-Raa
G-Baa
B-Raa
B-Gaa
MATRIX ON/OFFaa
USER MATRIX ON/
OFFaa
MULTI MATRIX ON/
OFFaa

(P12)HUEaa
SAT
aa

(P13)SHUTTERaa
VA R
aa

(P15)NOISE SUPaa
LEVEL
aa

(M03)V SAW [R]...

103File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
5-3 File Operations
5-3-1 Using a “Memory Stick”
You can use “Memory Stick PRO” media with this camera. 
“Memory Stick PRO Duo” can also be used without using 
a Memory Stick Duo adaptor.
The camera operations have been checked using “Memory 
Stick PRO” media up to 8GB.
Operations checked with:
MSH-128
MSX-512S
MSX-M2GS
MSX-M4GS
MSX-M8GS
For details on “Memory Stick” media, see“About a 
“Memory Stick”” (page 128).
Inserting a...

104File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
During formatting, “MEMORY STICK ACCESS” is 
displayed.
When formatting is completed, “COMPLETE” is 
displayed.
5-3-2 Storage and Retrieval of the 
Operator File
Use the  page of the FILE menu.
The  page is also included in the 
USER (OPERATION) menu (see page 57).
To store the operator file in a “Memory 
Stick”
Perform necessary settings for the operation items and the 
customized USER menu for the operator file you wish to...

105File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
The WHITE R/B item is provided only for confirming the 
effect of compensation (comparison between when the file 
is used and not used). The file cannot be stored with 
WHITE R/B set to OFF.
To store in or retrieve from a “Memory 
Stick”
Position the pointer to LENS MS READ/WRITE and push 
on the MENU SEL/ENTER dial. The subpage will be 
displayed.
To  s t o r e
Position the pointer to WRITE (CAM t MS) then push 
on the MENU...

106File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
2Position the pointer to READ (MS t CAM) and push 
on the MENU SEL/ENTER dial.
5-3-5 Storage and Retrieval of the 
Reference File
Use the  page of the FILE menu.
To retrieve the reference file (standard 
settings) stored in built-in memory
Position the pointer to STANDARD and push on the 
MENU SEL/ENTER dial.
To store the reference file in built-in 
memory
Perform necessary settings for the reference-file items you 
wish to...

107File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
5-3-8 Storage of the OHB File
Use the  page of the FILE menu.
1Execute STANDARD on the  page of 
the FILE menu.
2Using the MAINTENANCE menu, perform necessary 
settings for the items marked with “a” in the “O” 
column of the table in “5-2 List of Items Stored in 
Fi le s” for the file you wish to store.
3Call up the 

108File Operations
  Chapter 5   Storage and Retrieval of User Setting Data
 page
 page
To reset data of files by type of files
To reset data of the operator file, User-Gamma 
file, User-MLUT file, and reference file
Position the pointer to the corresponding line then push on 
the MENU SEL/ENTER dial.
The data in the corresponding file in built-in memory will 
be reset to the initial settings.
The configuration of the USER menu can be reset in the 
same manner.
To reset data of the lens files
 To reset...

109Using the RM-B750
  Appendixes
Appendixes
Using the RM-B750
When the RM-B750 Remote Control Unit (optional) is 
connected, you can control the menu settings of this 
camera and monitor the camera images on the display of 
the RM-B750.
Connection
Using the remote control cable supplied with the RM-
B750, connect the CAMERA connector of the RM-B750 
and the REMOTE connector of the camera.
Operating the Menu of This Camera
The menu of this camera can be displayed on the display 
of the RM-B750 and be set...

110Using the MSU-900/950
  Appendixes
Monitoring the Camera Image
Settings on this camera
Set RM [SIG] to VBS on the  
page of the USER (OPERATION) menu.
Settings on the RM-B750
Press the MONITOR button. The camera image will be 
displayed on the display of the RM-B750.
VBS signals are fed to an external monitor if connected via 
the MONITOR connector of the RM-B750.
Using the MSU-900/950
You can adjust this camera from the MSU-900/950 Master 
Setup Unit via a network.
You can use either Bridge mode to...