Sony Ericsson P800 User Guide

Phone51This is the Internet version of the user’s guide. © Print only for private use. Flight modeIn flight mode the radio function is turned off so that it does not 
disturb sensitive equipment, for instance in an airplane or in a 
hospital. You cannot make and receive calls, but most of the 
other functions in the P800 are available.
Note The phone and other communication functions must never 
be used in an aircraft unless otherwise instructed by the aircraft 
personnel. If the use of equipment without...

52PhoneThis is the Internet version of the user’s guide. © Print only for private use. • Program digit 
sequences into a 
Contact card for the 
service. Each digit 
sequence to be sent 
as tones must begin 
with a 
p.
Once your call to 
the service has been 
established and you 
want to send one of 
your pre-
programmed digit 
sequences, choose 
Show contact
 on the 
Phone menu to get 
to the Contact card 
with the tone 
sequences.
Note It is not advisable to program any personal codes into 
your P800,...

Phone53This is the Internet version of the user’s guide. © Print only for private use. •
Ring (data)
 – Select a ring signal for incoming data calls. Tap 
the trumpet to listen to the signal. Tap again to stop playback.
•
Vibrating alert
 – Select the option you want.
•
Silent mode
 – Select the checkbox to turn off all sound ring 
signals.
To change the default ring tone
1. Tap the Ring (voice) or Ring (data) drop-down menu.
2. Select Default Melody for the P800 default or Find Melody 
to select a new...

54PhoneThis is the Internet version of the user’s guide. © Print only for private use. •
Play caller name
 – If you have recorded a name for a person in 
Contacts, the P800 will tell you the person’s name when he 
or she calls you. This is useful when using your P800 
together with a handsfree.
•
Voice commands
 – A list of the voice commands. A balloon 
means that a voice command is recorded for the command.
To record a voice command
1. Select one of the options, 
Magic word
, Answer
, or 
Busy
 and tap...

Phone55This is the Internet version of the user’s guide. © Print only for private use. Add to contactsThis is a function for adding called and calling parties to Contacts
. After a call has ended, if the telephone number is not 
already stored in the 
Contacts
, you are asked if you would like to 
add it.
Set the function 
On or 
Off.
HandsfreeSpecify how to manage calls when the P800 is used with a 
handsfree kit connected. 
•
Answering mode
 – Select the option you want.
–
Normal
 – Answer calls as...

56PhoneThis is the Internet version of the user’s guide. © Print only for private use. 2. Select 
Lookup
 and chose a contact, or write the name and 
number of the contact.
3. Select 
Done
.
Call waitingUse these setting to control how P800 handles incoming calls 
during an already ongoing call.
•
On – You will be alerted by incoming calls.
•Off – The P800 sends a busy tone to the calling party.
Restrict callsYou can set restrictions for calls made from or to your P800. 
You can, for example, protect it...

Phone57This is the Internet version of the user’s guide. © Print only for private use. Note Your operator may not allow you to access all available 
networks.
To add a network to the preferred list
1. Tap 
Add network
.
2. Select a network from the displayed list.
3. Select a position in the Preferred list and tap 
Done
.
Calling cardsCalling cards are used together with some telephony services. 
These settings specify how P800 handles calling cards. 
–
Calling card mode
 – Select how to use calling...

58PhoneThis is the Internet version of the user’s guide. © Print only for private use. Please refer to the onboard help for detailed information about 
the Call meter settings.
Note PIN2 is required from your network operator for storing 
any changes you make to the Call meter settings.
Not all networks provide charge information to the phone during 
a call. If your network provides this service and your 
subscription is for Advice of Charge Charging, you cannot make 
or receive any chargeable calls if...

CommuniCam and Pictures59This is the Internet version of the user’s guide. © Print only for private use. 
MEDIACommuniCam and PicturesWith the built-in camera CommuniCam you can take pictures, 
view them on your phone screen and send them directly to 
friends or colleagues via multimedia messaging. You can also 
send the pictures you have saved in your P800 via messaging, 
infrared communication or Bluetooth wireless technology to, for 
example, a PC. It is also possible to exchange pictures between 
the...

60CommuniCam and PicturesThis is the Internet version of the user’s guide. © Print only for private use. To take a picture
1. Press the camera button (
CAM
) to activate the 
CommuniCam application.
2. Press again to capture the image on the screen. The picture is 
automatically saved in 
Pictures
.
You can also press the Jog Dial, or, when the flip is open, tap the 
red button at the bottom of the screen to take a picture.
By default the pictures you take are stored internally in the 
Unfiled
 folder....