Sony Dschx90vb Manual

product and the smartphone is disconnected.
Data communication between this product and the smartphone may fail due to signal
conditions. Place  this product closer to the smartphone.
[279] Troubleshooting
TroubleshootingWi-Fi
You cannot use One-Touch connection (NFC).
Place  the (N mark) on the smartphone and the (N mark) on the product as close
together as possible.  If there is no response, move  the smartphone a few millimeters or
move  the smartphone away from this product, wait more than  10...

product.
[281] TroubleshootingTroubleshootingComputers
You cannot import images.
Connect this product and your  computer correctly making a USB connection.
When you shoot  images with a memory card  formatted by a computer,  you may not be
able to import the images to a computer.  Shoot using a memory card  formatted by this
product.
[282] Troubleshooting
TroubleshootingComputers
The image and sound are interrupted by noise when
viewing a movie on a computer.
You are  playing back the movie directly from...

[285] TroubleshootingTroubleshootingPrinting
Images are printed with both edges cut off.
Depending on your  printer, the left, right, top, and bottom edges of the image may be cut
off. Especially  when you print  an image shot with [
Aspect Ratio] set to [16:9], the
lateral end of the image may be cut off.
When printing images using your  printer, cancel the trimming or borderless settings  of the
printer. Consult the printer manufacturer as to whether the printer provides these
functions  or not.
When...

[288] TroubleshootingTroubleshootingOthers
The product stops with the lens portion extended./The
product turns off with the lens portion extended.
Do not attempt to force lens that has stopped moving.
Insert  a charged battery pack, then  turn the product on again.
[289] Troubleshooting
TroubleshootingOthers
The product becomes warm when you use it for a long
time.
This is not a malfunction. Turn off the product and do not use it for a while.
[290] Troubleshooting
TroubleshootingOthers
The Clock Set...

depending on the image when you shoot  a JPEG image.
[292] TroubleshootingTroubleshootingOthers
Settings are reset even though resetting operation has
not been performed.
The camera settings  may be reset if the battery pack is ejected while the power is on.
When ejecting  the battery pack, first turn the power off and check that the access lamp is
not illuminated before ejecting.
[293] Troubleshooting
TroubleshootingOthers
The product does not work properly.
Turn off the product. Remove the battery pack...

Remove the memory card, and insert  it again. If the problem persists  even after
performing this procedure, format the memory card.
[296] Troubleshooting
MessagesMessages
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function  on this
product is working. The last two digits (indicated by □□) will differ depending on the state of
this product.
If you cannot  solve the problem even after  trying  the following corrective actions a few times,
this...

[297] TroubleshootingMessagesMessages
Warning messages
Set Area/Date/Time.
Set  the area, date  and time. If you have not used the product for a long time, charge the
internal rechargeable backup battery.
Unable to  use memory card. Format?
The memory card  was formatted on a computer and the file format was modified. Select
[Enter] , and then  format the memory card. You can use the memory card  again, however,
all  previous data  in the memory card  is erased. It may take some  time to complete the...

Processing  on the computer such as deletion  of the image files may cause
inconsistencies in the image database files. Repair  the image database files.
Internal temp. high. Allow it to  cool.
The product has become hot because you have been shooting continuously. Turn the
power off. Cool the product and wait until the product is ready  to shoot  again.
You have been recording images for a long time, the product temperature has risen.  Stop
recording images until the product cools.
Recording  is...

Situations this product has difficulty handling
The product cannot  take full advantage of some  features under certain  circumstances. 
When shooting under the following conditions, either  recompose  the shot or change the
shooting mode, then  shoot  the images again.
Low light conditions
iSweep Panorama
Lock-on AF
Overly bright  conditions
Lock-on AF
Varying levels of brightness
Lock-on AF
Flickering lights
iSweep Panorama
Subjects too close to the product
iSweep Panorama
Subjects with large movements...