Sony Dschx90vb Manual

Start up PlayMemories Home and display the main screen, then  launch  [GPS Support  Tool].
Select the drive of the memory card  and update the GPS assist data. Then insert  the
updated memory card  to this product.
[153] How  to Use
Changing settingsSetup menu
GPS Log REC (DSC-HX90V)
You can set the start/end of the GPS log recording.  The product continues to record the
track even when the power is off. To confirm the track,  a computer with an internet
connection and the software PlayMemories Home is...

1.  MENU  →  (Setup )  → [GPS Settings] →  [Delete GPS log data].
[155] How  to Use
Changing settingsSetup menu
Upload Settings(Eye-Fi)
Sets  whether to use the upload  function  when using an Eye-Fi card  (commercially
available). This item appears when an Eye-Fi card  is inserted into the product’s memory
card  slot. 1.  MENU  → 
 (Setup )  → [Upload  Settings]  → desired setting.
2 .  Set  your  Wi-Fi network  or destination on the Eye-Fi card.
For details, refer to the manual supplied with the Eye-Fi...

If  (error) is displayed,  remove the memory card  and reinsert it, or turn the product
off and then  on again. If the indicator appears again, the Eye-Fi card  may be damaged.
Wireless LAN  communication may be influenced by other communication devices. If the
communication status is poor, move  closer to the access point to be connected.
Third parties  may know where you shot the image if you upload  the image containing
GPS information. This is because [GPS On/Off] is set to [On]. Set  [GPS On/Off] to...

Off : 
Does not display the Mode  Dial Guide.
[158] How  to Use
Changing settingsSetup menu
Delete confirm.
You can set whether [Delete]  or [Cancel] is selected as the default  setting  on the delete
confirmation  screen.
1.  MENU   →
(Setup)  → [Delete confirm.]  → desired setting.
Menu item details
Delete  first: 
[Delete]   is selected as the default  setting.
Cancel first :
[Cancel]  is selected as the default  setting.
[159] How  to Use
Changing settingsSetup menu
Display Quality
You can change the...

Pwr Save Start Time
You can set the time by which the power goes off automatically.1.  MENU   →
(Setup) →  [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min /2 Min /1 Min
Note
The power save function  is not activated  when power is being  supplied via USB, when
playing back slideshows, when recording movies,  or when connected to a computer or
TV.
[161] How  to Use
Changing settingsSetup menu
PAL/NTSC Selector
Plays  back movies recorded  with the product on a PAL/NTSC system TV....

The [Demo  Mode] function  displays the movies recorded  on the memory card  automatically
(demonstration), when the camera has not been operated  for a certain  time. Normally  select
[Off].
1.  MENU  → 
(Setup)  → [Demo  Mode]  → desired setting.
Menu item details
On: 
The movie playback  demonstration starts  automatically if the product is not operated  for
about  one minute. Only protected AVCHD  movies are  played  back.
Set  the view  mode  to [AVCHD View] , and protect the movie file with the...

If the images are  not displayed properly using the [Auto] setting, select either  [1080i] or
[1080p] , based on which TV is to be connected.
[164] How  to Use
Changing settingsSetup menu
24p/60p Output (movie) (Only for 1080 60i compatible
models)
Sets  the output format when connecting via HDMI and [Record Setting] is set to [60p
28M(PS)] , [24p  24M(FX)] , [24p  17M(FH)] , [60p  50M] or  [24p  50M].
1 .  MENU  → 
 (Setup )  → [HDMI Settings]  → [HDMI Resolution]  → [1080p].
2 .  MENU  → 
 (Setup )  →...

Note
[CTRL FOR HDMI] is available  only with a “BRAVIA” Sync-compatible TV.
[166] How  to Use
Changing settingsSetup menu
HDMI Info. Display
Selects whether to display the shooting information  when this product and the TV are
connected using an HDMI cable (sold separately). 1.  MENU  → 
 (Setup )  → [HDMI Settings]  → [HDMI Info.  Display]  → desired setting.
Menu item details
On: 
Displays the shooting information  of the played  back image.
Off :  
Does not display the shooting information  of the...

Windows 7 or Windows 8 computers are  connected in MTP, and their  unique  functions  are
enabled for use.
Note
It may take some  time to make  the connection between this product and a computer
when [USB Connection] is set to [Auto].
If Device Stage*  is not displayed with Windows 7 or Windows 8, set [USB Connection] to
[Auto].
* Device Stage is a menu  screen  used to manage connected devices, such as a camera
(Function of Windows 7 or Windows 8).
[168] How  to Use
Changing settingsSetup menu
USB LUN...

Off :
Power is not supplied to the product via a micro  USB cable when the product is connected to
a computer,  etc.
Note
If you use an AC-UD10/AC-UD11 AC adaptor (sold separately), power can be supplied to
the product via USB cable even when the battery pack is not inserted.
[170] How  to Use
Changing settingsSetup menu
Language 
Selects the language to be used in the menu  items, warnings  and messages. 1.  MENU  → 
(Setup)  → [Language] → desired language.
[171] How  to Use
Changing settingsSetup...