Sony DPP FP95 User Manual

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
21 GB
Direct printing
Editing an image
1From the   Edit menu (page 18), 
press g/G to select   (Enlarge) to 
enlarge an image or   (Reduce) 
to reduce it, and then press ENTER.
Each time you press the button, the image 
becomes larger or smaller. You can also 
use the   (zoom in) and   (zoom out) 
buttons to enlarge or reduce the image 
size:
 : up to 200%
 : down to 60%
Note
The picture quality of an enlarged image may 
deteriorate depending on its size.
1From the   Edit menu (page 18), 
press g/G to select   (Move) and 
then press ENTER.
The g/G/f/F indicators appear on the 
left/right/above/below the image and you 
can move the image.
2Press g/G/f/F to move an image.
3Press ENTER.
The image is fixed in its current position.
4Press PRINT.
1From the   Edit menu (page 18), 
press g/G to select   (Rotate) and 
then press ENTER.
The Rotate menu is displayed.
2Press f/F to select the direction to 
rotate the image and then press 
ENTER.
 Rotate 90 Clockwise: Each time you 
press ENTER, the image rotates 90° 
clockwise.
 Rotate 90 Counterclockwise:
Each time you press ENTER, the image 
rotates 90° counterclockwise.
3Press PRINT.
Enlarging and reducing 
an image size
Moving an image
Rotating an image
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
22 GB
1From the   Edit menu (page 18), 
press g/G to select   (Adjust) and 
then press ENTER.
The Adjust menu is displayed.
2Press f/F to select the desired 
adjustment tool and press ENTER.
The adjustment screen of the selected tool 
appears.
Press g/G to adjust an image while 
checking the level.
The image before adjustment is displayed 
on the left half of the screen, and the 
adjusted image is displayed on the right.
Brightness: Press G to brighten the 
picture or g to darken it.
Tint: Press G to make the picture 
greenish or g to make it reddish.
Saturation: Press G to deepen the 
colors or g to lighten them.
Sharpness: Press G to sharpen the 
outlines or g to soften them.
3Press ENTER.
The adjustment takes effect. 
4Press PRINT.
1From the   Edit menu (page 18), 
press g/G to select   (Filter) and 
then press ENTER.
The Filter menu is displayed.
.
2Press f/F to select the filter you 
want to add to the image.
No Filter: No special filter is used on 
the image (default setting).
Single Color: Changes all the colors 
except for the one specified color into 
gray scale.
Painting: Makes the image look like a 
painted picture.
Cross Filter: Adds a cross, starburst 
effect to the light source to print an 
image with a sparkling impression.
Partial Color: Makes the 
surroundings of the subject 
monochrome to emphasize the subject 
in the center.
Sepia: Changes the image to look like 
an old photograph with faded colors.
Monochrome: Changes the image 
into a black and white picture.
Adjusting an image
When “Brightness” is selected.
Adding a special filter to 
an image
The “Painting” filter of the printer is uses the 
technology of Ichikawa Soft Laboratory.
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
23 GB
Direct printing
Fish-eye: Makes the image look like a 
photo taken with a fish-eye lens.
3Press ENTER.
The filter takes effect.
When you have selected “Cross Filter,” 
“Painting,” or “Single Color,” the setting 
window is displayed. Move to the next 
step.
4Set the level and range.
x Cross Filter
1Select “Level” with f/F and press 
ENTER, adjust the level with f/F, and 
then press ENTER.
The higher the level you set, the more 
light sources become sparkling.
2Select “Length” with f/F and press 
ENTER, adjust the length of light with 
f/F, and then press ENTER.
x Painting
Press f/F to adjust the line length and 
then press ENTER.
x Single Color
To select a color from specified colors
Press g/G to select the color that you 
want to retain and then press ENTER.
The image becomes monochrome while 
the specified color remains.To select a color from a photo
1Press f/F to select “Select a favorite 
color.,” then press ENTER.
The image is displayed with the color-
pick tool. 
2Press g/G/f/F to specify the portion 
that contains your favorite color, and 
then press ENTER.
3Press g/G to specify the range of the 
selected color.
4Press ENTER to fix the color and range.
The image becomes monochrome while 
the specified color remains.
5Press PRINT.
Tip
To redo the above operations, select “No Filter” and 
then redo the operations.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
24 GB
When pressing AUTO TOUCH-UP cannot 
reduce the red-eye phenomenon of a subject 
shot by flash, you can adjust the image 
manually.
Note
If you perform additional editing, such as enlarging, 
reducing the image size, rotating or moving an image, 
after the red-eye correction, the red-eye correction 
may not take effect. Perform the red-eye correction 
after these editorial operations.
1From the   Edit menu (page 18), 
press g/G to select   (Red-eye 
Correction) and then press ENTER.
The adjustment frame appears on the 
image, which indicates the range for red-
eye correction.
2Adjust the position and size of the 
adjustment frame.
Make the red-eye correction for the right 
and left eyes separately.
x To move the adjustment frame
1Press g/G to select   (Move) and 
press ENTER.
2Move the frame with g/G/f/F.
The frame moves in the selected 
direction.
3Press ENTER.
The frame is fixed in the current 
position.
x To change the size of the 
adjustment frame
Press g/G to select   (Enlarge) or   
(Reduce) and press ENTER.
Each time you press ENTER, the frame 
becomes larger or smaller.
You can also enlarge or reduce the size by 
pressing the   (zoom in) or   (zoom out) 
buttons on the printer.
Tip
Make the size of the adjustment frame 2 to 7 
times as large as the eye size.
3Press g/G to select   and press 
ENTER.
The range of red-eye correction is 
enlarged.
4Press ENTER.
The adjustment takes effect.
The Red-eye correction menu is 
displayed.
To make a red-eye correction for other 
eyes, repeat steps 2 to 4.
5Press g/G to select   and press 
ENTER.
The Edit menu is displayed again.
6Press PRINT.
To reset the adjustment
Press CANCEL in step 5 instead of ENTER.
Correcting the red-eye 
phenomenon
         Adjustment frame
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
25 GB
Direct printing
1Press PRINT.
The print quantity indication is displayed.
2Set the print quantity.
 To increase the print quantity one by 
one, press f repeatedly.
 To reduce the print quantity one by one, 
press F briefly repeatedly.
 To reset the print quantity to 1, press F 
for more than two seconds.
3Press PRINT.
1Select   (Save) and then press 
ENTER.
The dialog box used to specify the 
destination folder is displayed.
2Select the destination where you 
want to save the image.
Press f/F to select “Memory Stick,” 
“CompactFlash,” “SD Card,” “xD-Picture 
Card” or “External Device,” and press 
ENTER.
Tip
When you select “External Device,” a dialog 
box for selecting a drive may be displayed. 
Follow the instructions on the screen to select 
the destination drive.
The dialog box used for setting a date is 
displayed. You can save the set date with 
the image.
3Set date.
Press g/G to select an item (day, month, 
and year), and press f/F to select the 
number, and then press ENTER.
The image edited by the Edit or 
CreativePrint menu is saved as a new 
image. The dialog box used to specify the 
new image number (folder number-file 
number) is displayed.
Tip
The original image will not be overwritten.
4Press ENTER.
Notes
 While the image is being saved, do not turn off the 
printer or remove a memory card or external 
device from the printer. The printer, memory card, 
USB card, or external device may be damaged or 
the data may be lost.
 You cannot save built-in images.
  Printing an edited image
Saving an edited image
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
26 GB
Performing 
“CreativePrint”
Using the CreativePrint menu
Note
Depending on the size of the print paper, the 
templates you can select may differ. To specify 
the template, make sure to set the appropriate 
ink ribbon and print paper in advance. Then 
select a template for the size set. 
To undo the operation midway
Press CANCEL The window of the previous step is 
displayed. Depending on the step, you may not be 
able to undo the operation.
To exit the CreativePrint menu
 Press MENU in the middle of the operations 
and select “CreativePrint Complete.”
 In the image preview view, press 
g/G/f/F 
to select   and press ENTER.
The dialog box for saving an image may be 
displayed (page 25).
Tip
You can press MENU while performing CreativePrint 
and set part of the Print setup menu items.
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
 “Scrapbook,” then press ENTER.
The window for selecting a theme is 
displayed.
2Press g/G/f/F to select the desired 
theme, then press ENTER.
The window used for selecting templates 
of the selected theme is displayed.
3Press g/G/f/F to select the desired 
template, then press ENTER.
A preview of the selected template is 
displayed.
4Select an image.
When you select a template with multiple 
images, repeat the procedures below to 
select an image for each area.
Making a Scrapbook
Image area
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
27 GB
Direct printing
1Press g/G/f/F to select an image area, 
then press ENTER.
The index view is displayed.
2Press g/G/f/F to select the desired 
image, then press ENTER.
The window used for adjusting the 
image is displayed.
5Adjust the image size, position or 
others of the selected image. 
Press g/G to select the desired adjustment 
item, then press ENTER.
6Press g/G to select   and press 
ENTER.
The selected image is added to the image 
area.
To add a stamp, see “Superimposing a 
stamp” on page 31.
7Press PRINT.
To save the image, see page 25.
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
“Calendar,” then press ENTER.
The window used for selecting the 
calendar template, is displayed.
2Press g/G/f/F to select the desired 
template, and then press ENTER.
The preview of the selected template is 
displayed.
Tip
You can select and set an image area or calendar 
area in any order.                 Adjustment tools
Items Procedures
   / Increases or reduces the 
size of an image when the 
buttons on the printer are 
pressed.
Move the image with
 
g/G/f/F, and then press 
ENTER.
Each time you press 
ENTER, the image rotates 
90° clockwise.
Automatically adjusts a 
failed photo having 
problems such as being 
backlit, out-of-focus, or 
showing the red-eye 
phenomenon, when the 
button on the printer is 
pressed.(page 20)
Making a Calendar
Image area Calendar area
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
28 GB
3Select an image.
When you select a template with multiple 
images, select an image for each area. For 
how to select an image, see step 4 on 
page 26. When you select image(s), the 
window for adjusting the image is 
displayed. 
4Adjust the image.
For how to adjust an image, see step 5 on 
page 27. When you adjust an image, the 
image is added to the image area.
5Set the calendar.
1Press g/G/f/F to select the calendar 
area and press ENTER.
The calendar setting window is 
displayed.
2Press f/F to select the item that you 
want to set, and then press ENTER.
Item Settings/Procedures
Start Y/MSet the first month and the 
year starting the calendar. 
Press 
g/G to select the 
month or year and press 
f/F to set the number. 
Press ENTER.
Start DaySet the day of the week 
(placed furthest left in the 
calendar). Press f/F to 
select “Sunday” or 
“Monday.” Then press 
ENTER.
Date color  Set the color of Sunday and 
Saturday to be displayed in 
the calendar. Press G and 
then f/F to select the 
desired color for Sunday 
and Saturday. Then press 
ENTER.
Modify 
CalendarYou can add a stamp or 
desired color to a specific 
day in the calendar.
When adding a stamp 
(Example)
1Press g/G to select   
(Stamp), and press 
ENTER. 
The stamp selection 
window is displayed. 
2Press g/G/f/F to select 
a desired stamp, and 
press ENTER. 
The calendar is displayed. 
3Press g/G/f/F to select a 
desired date for adding a 
stamp and press 
ENTER. 
4Press f/F to select   
and press ENTER.
To exit Modify Calendar 
and return to the Calendar 
setting window, press g/G 
to select   and press 
ENTER. You can set “Date 
color” in the similar 
procedures. Item Settings/Procedures
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
29 GB
Direct printing
The calendar is displayed in the calendar 
area.
To add a stamp, see “Superimposing a 
stamp” on page 31. 
6Press PRINT.
To save the image, see page 25.
 
Tip
To superimpose handwritten characters or an 
illustration, draw them with a black ink pen on a sheet 
of white paper, shoot them with a digital camera, and 
save the image on a memory card.
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
“Superimpose,” then press 
ENTER.
The window used for selecting the 
background image is displayed.
2Select an image for the background.
1Press g/G/f/F to select an image for 
background, then press ENTER.
The window used for adjusting the 
image is displayed. For how to adjust an 
image, see step 5 on page 27.
2Press g/G to select   and then press 
ENTER.
Preview window is displayed.
3Superimpose a handwritten or a 
standard format message over the 
background image.
x To superimpose a handwritten 
message
1Press g/G to select   (Handwritten 
message), then press ENTER.
The window used for selecting an 
image to be superimposed is displayed.
2Press g/G/f/F to select the image you 
want to superimpose and press ENTER.
Select the image of handwritten 
characters or illustrations you have 
prepared in advance.
The trimming cursor is displayed.
3When you do not want to trim a 
message, press ENTER.
Superimposing a message on 
an image
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
30 GB
To specify the trimmed portion
Press 
g/G/f/F to select   
trimming tool, and press ENTER.
Press 
g/G/f/F to move the cursor to 
the position that you want to specify as 
the beginning point of the trimmed area, 
then press ENTER.
Repeat the same procedures to specify 
the ending point of the trimmed area.
The color selection window is 
displayed.
4Press g/G/f/F to select the desired 
color and then press ENTER.
The window used for adjusting the 
superimposed image is displayed.
For how to adjust an image, see step 5 
on page 27.
5Press g/G to select   and press 
ENTER.
A preview of the selected image 
superimposed on the background image 
is displayed.x Superimposing a standard 
format message
1Press g/G to select   (Standard 
format message), then press ENTER.
The window used for selecting a 
standard format message is displayed.
2Press f/F to select the desired message 
and press ENTER.
The color selection window is 
displayed.
3Press g/G/f/F to select the desired 
color and then press ENTER.
The window used for adjusting the 
message is displayed. For how to adjust 
an image, see step 5 on page 27.
4Press g/G to select    and press 
ENTER.
A preview of the superimposed 
message on the background image is 
displayed.
Downloaded From ManualsPrinter.com Manuals