Sony DPP FP67 User Manual

							31 GB
Direct printing
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
Tip
The year, month and day of the shot date are 
displayed in the same order as the date print setting.
1From the   (Print setup) menu, 
press g/G/f/F to select   (Color 
Setting) and then press ENTER.
The Color Setting menu is displayed.
2Press g/G to select the desired 
color element, and press f/F to set 
the level.
You can set the levels for a color element:  
“R” (red), “G” (green) or “B” (blue) in the 
range from +4 to –4.
R: Adjusts the red and blue elements. The 
higher you set the level, the more 
reddish the picture becomes as if it is 
subjected to red light. The lower you 
set the level, the darker the picture 
becomes, as if light blue is added.
G: Adjusts the green and purple elements. 
The higher you set the level, the more 
greenish the picture becomes as if it is 
subjected to green light. The lower you 
set the level, the darker the picture 
becomes, as if reddish purple is added.
B: Adjusts the blue and yellow elements. 
The higher you set the level, the more 
bluish the picture becomes as if it is 
subjected to blue light. The lower you 
set the level, the darker the picture 
becomes, as if yellow is added.
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Printer information display) and 
then press ENTER.
The Printer information display menu is 
displayed. You can check the version 
number and total print quantity of the 
printer.
2Press ENTER.
The Printer information display window is 
closed.
Changing the Color Setting  
Hiding or showing the Printer 
information display 
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							32 GB
You can reset all the settings to the default 
settings.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Default Setting) and then press 
ENTER.
The confirmation window is displayed.
2Press f/F to select “OK” and press 
ENTER.
The printer settings are reset to their  
default settings.
 
Printing from a USB 
memory
You can connect a USB memory and the 
printer, and print an image directly from the 
USB memory.
Notes
 We cannot guarantee connection with all types of 
USB memory.
 We cannot guarantee connection with a mass 
storage-compliant digital camera or photo storage.
 If a memory card is inserted in the printer, the 
printer cannot read the signal from a USB memory 
connected to the PictBridge/EXT INTERFACE 
connector of the printer. Remove the memory card, 
if any.
1Connect the printer to the AC power 
source (page 12).
2Press the 1 (on/standby) button to 
turn on the printer.
3Connect a USB memory into the 
PictBridge/EXT INTERFACE 
connector of the printer.
Resetting to the Default 
Setting 
To PictBridge/EXT 
INTERFACE connector
USB memory
Downloaded From ManualsPrinter.com Manuals 
						

							33 GB
Direct printing
Notes
 While the access indicator of a USB memory is 
flashing, never turn off the power of the printer.  
The data stored in the USB memory may be 
damaged. We cannot compensate for any damages 
that may be caused by data loss or damage.
 You cannot use a USB hub or a USB device 
equipped with a USB hub.
 Encoded or compressed data by fingerprint 
authentication or password cannot be used.
Downloaded From ManualsPrinter.com Manuals 
						

							34 GB
Printing from a PictBridge camera
Printing from a 
PictBridge camera
You can connect a PictBridge-compliant digital 
camera and print an image directly from your 
digital camera.
When printing in the PictBridge mode, make 
sure to remove memory card(s) and your 
computer from the printer in advance.
1Set your digital camera ready for 
printing with a PictBridge-compliant 
printer.
The required settings and operations that 
must be completed before connection 
differ depending on the digital camera. 
For details, refer to the operating 
instructions of your digital camera. (In 
case of Sony Cyber-shot digital camera, 
for example, select “PictBridge” mode for 
“USB Connect.”)
2Connect the printer to the AC power 
source (page 12).
3Press the 1 (on/standby) button to 
turn on the printer.
4Connect the PictBridge-compliant 
digital camera to the PictBridge/EXT 
INTERFACE connector of the 
printer.
When you connect a PictBridge-compliant 
digital camera to the printer, “PictBridge” 
is displayed on the LCD display of the 
printer.
5Operate the digital camera to print 
an image.
The printer supports the following prints:
 Single-image print
 All images print
 Index print

 Borders/Borderless print
 Date print
Notes
 If you replace an ink ribbon while the printer is 
connected to a PictBridge-compliant digital 
camera, an image may not be printed properly.  If 
this occurs, disconnect and then re-connect the 
digital camera.
 When printing via the PictBridge/EXT 
INTERFACE connector, an image will be printed 
according to the settings of the Print setup menu of 
the printer.  When you set the Date Print or 
Borders/Borderless options with your digital 
camera, the digital camera settings will have 
priority. If you select “Borderless” with the printer 
and “Borders” with your camera, “Borders (Pattern 
1)” will be used for printing.
 You cannot use a USB hub or a digital camera 
containing a USB hub.
 For error messages displayed on your digital 
camera, refer to the operating instructions of your 
digital camera. To PictBridge/EXT 
INTERFACE connector
A PictBridge camera
To USB connector
Downloaded From ManualsPrinter.com Manuals 
						

							35 GB
   Printing from a Bluetooth-compliant device
Printing from a Bluetooth-compliant device
Printing from a Bluetooth-
compliant device
By connecting the Sony DPPA-BT1 Bluetooth 
USB adaptor (sold separately) to the 
PictBridge/EXT INTERFACE connector of 
your printer, you can print an image from a 
Bluetooth-compliant mobile phone, digital 
camera, or other device.
Notes
 Do not use the DPPA-BT1 outside the area you 
purchased it. Depending on the area, the use of the 
adaptor may violate the local radio wave 
regulations and may be subject to penalty.
 In some regions, the Sony DPPA-BT1 Bluetooth 
USB adaptor is not sold.
The DPP-FP67/FP77 supports the following 
profiles:
 BIP (Basic Imaging Profile)
Image Push Responder
 OPP (Object Push Profile)
Object Push Server
For the profiles that your Bluetooth device 
supports, please refer to its manual.
What is a “Profile”?
A profile consists of the standards that enable 
Bluetooth wireless communication. There are 
several profiles available, depending on the 
purposes and product to be used. To make 
Bluetooth communication possible, the devices 
used in the communicated should support the 
same profile.
Compatible image file formats that can 
be printed
See page 65.Maximum number of pixels that can be 
handled
See page 65.
When printing from the PictBridge/EXT 
INTERFACE connector, make sure to remove 
memory card(s) from the printer in advance.
1Connect the printer to the AC power 
source (page 12).
2Press the 1 (on/standby) button to 
turn on the printer.
3Insert the Bluetooth adaptor into the 
PictBridge/EXT INTERFACE 
connector of your printer.
Note
If any device, other than the Bluetooth adaptor, 
such as a memory card, camera, PC, or other 
USB memory or a USB cable is connected to 
any of the memory card slots, the PictBridge/
EXT INTERFACE connector, or USB 
connecter of your printer, disconnect it from the 
printer and then connect the Bluetooth adaptor.
4Print from the Bluetooth-compliant 
mobile phone, or other device.
For printing procedures, refer to the 
manual of your Bluetooth device.
Compatible profiles for 
Bluetooth communication
Printing procedures
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							36 GB
To select the printer from a Bluetooth-
compliant device, select “Sony DPP-FP67 
##”/“Sony DPP-FP77 ##.” “##” stands for 
the two figures from the right of the 
address displayed in the LCD screen.
When input of Passkey* is required
Input “0000.” You cannot change the 
Passkey with the printer.
* A Passkey is often referred to as a “pass 
code” or “PIN code.”
Notes
 Do not use the 
DPPA-BT1 outside the area you 
purchased it. Depending on the areas, the use of 
this product may violate the local radio wave 
regulations and may be subject to its penalty.
 The communication distance of the product may 
vary depending on the obstacles between the 
product (a human body, metal object, or wall) and 
the mobile phone or other device.
 The sensitivity of the Bluetooth communication 
may be affected in the following conditions:
– When there is an obstacle between the product 
and the mobile phone or other product such as a 
human body, metal object, or a wall.
– Where a wireless LAN is established or a 
microwave oven is being used near-by, or other 
electromagnetic waves are emitted.
 Since a Bluetooth device and a wireless LAN 
(IEEE802.11b/g) device use the same frequency 
ranges, wave interference may occur when the 
product is used near a device equipped with a 
wireless LAN. This may cause deterioration in the 
communication speed and connection conditions.  
If this occurs, take the following measures:– Keep a distance of at the least 10 m from a 
wireless LAN device when you connect the 
product to a mobile phone.
– Turn off the wireless LAN device in case you 
want to use the product closer than 10 m from 
the wireless LAN device.
 We can not guarantee that this product works with 
all devices enabled with Bluetooth wireless 
technology.
 Sony cannot assume any responsibility for any 
information leakage that may be caused in 
Bluetooth communications.
 Sony cannot accept responsibilities for any failure 
to satisfy the protection requirements resulting 
from a non-recommended modification or use of 
the product.
 For customer support information, please refer to 
the operating instructions of your printer.
P Caution
 Radio waves from a Bluetooth device may 
adversely affect the operation of electrical and 
medical devices, and could lead to accidents due to 
malfunctions.  Make sure to turn off the product 
and mobile phone and do not use this product in 
the following places:
– Inside medical facilities, trains, airplanes, gas 
stations or other places that may emit flammable 
gas.
– near automatic doors or fire alarms or other 
automatically controlled devices.
 Keep this product at least 22 cm away from cardiac 
pacemakers. Radio waves from this product may 
adversely affect the operation of cardiac 
pacemakers.
 Do not disassemble or modify this product. Doing 
so could result in injury, electric shock, or fire.
Downloaded From ManualsPrinter.com Manuals 
						

							37 GB
    Printing from a PC
Printing from a PC
Printing from a PC
You can print the images from a PC by 
installing the supplied software on your PC and 
connecting it to the printer.
This section explains how to install the 
supplied software on your PC and how to use 
the supplied PMB (Picture Motion Browser) 
software to print an image.
Please also refer to the operating instructions 
supplied with your PC for information on 
operating the PC.
Installation of the software is necessary only 
when you connect the printer to your PC for the 
first time.
On the supplied CD-ROM
The supplied CD-ROM contains the following 
software:
 Printer driver for the DPP-FP67/FP77: The 
software describes the printer’s requirements 
and enables printing from the PC.
 PMB (Picture Motion Browser): Sony’s 
original software application that allows you 
to handle photographs and moving images—
this includes capturing, managing, 
processing, and printing.
Installing the software
To use the supplied printer driver and PMB, 
you need a PC that meets the following system 
requirements:
System requirements
Operating 
system for 
printer 
driver
*1:Microsoft Windows Vista SP1 / 
Windows XP SP3 / Windows 2000 
Professional SP4
Operating 
system for 
PMB
*2:Microsoft Windows Vista SP1
*3 / 
Windows XP SP3*4
*1This printer driver does not run on 
Windows 2000 Professional SP2 or 
earlier, and Windows Me or earlier. 
This printer driver does not run on 
Macintosh.
*2PMB cannot be installed on 
Windows 2000 or earlier. PMB does 
not run on Macintosh.
*3PMB runs in a 32-bit compatibility 
mode on Windows Vista 64-bit 
edition. 
Starter Edition is not supported.
*464-bit edition and Starter Edition are 
not supported.
CPU: Pentium III 500 MHz or faster 
(Pentium III 800 MHz or faster is 
recommended.)
RAM: 256 MB or more (512 MB or more 
is recommended.)
Hard disk 
space:500 MB or more (Depending on 
the Windows version you are 
using, more space will be required. 
To handle image data, you will 
need additional hard disk space.)
Display 
setting:Screen resolution: 1024 × 768 dots 
or more 
Screen colors: High Color (16-bit) 
or greater
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							38 GB
Notes
 If a hub is used to connect the printer and your PC, 
or if two or more USB devices, including other 
printers, are connected to your PC, trouble may 
occur. If this occurs, simplify the connections 
between your PC and the printer.
 You cannot operate the printer from another USB 
device being used simultaneously.
 Do not remove the USB cable from or connect it to 
the printer during data communication or printing. 
The printer may not work properly.
 The printer does not support standby, sleep, and 
hibernation modes and restarting from those 
modes.  Do not allow the PC connected to the 
printer to switch to one of those modes during 
printing.If you do so, printing may be failed.
 When printing is failed, remove a USB cable and 
then connect it, or restart your computer. Then try 
printing again.
 If you pause a printing job in process, and resume 
printing after a while, printing may not be 
performed correctly.
 We cannot guarantee operations with all PCs, even 
though they may meet or exceed the system 
requirements.
 PMB supports DirectX technology and DirectX 
installation may be required.
DirectX is available on the CD-ROM.
 If the PMB is installed on a PC on which the 
Cyber-shot Viewer is already installed, the Cyber-
shot Viewer will be overwritten and replaced by 
the PMB. The browsing folders once registered in 
the Cyber-shot Viewer will be automatically 
registered in the PMB. When using the PMB, you 
can view the folders easier than you can when 
using the Cyber-shot Viewer, as the registered 
folders are displayed by group when viewing 
folders. With its improved red-eye reduction 
adjustment and newly-added tone curve 
adjustment, the PMB also offers more powerful 
editorial features. You can also use the software to 
write data onto an external memory card for it.
Follow the procedures below to install the 
driver.
Notes
 Do not connect the printer to the PC before 
installing the driver.
 Please log on to Windows using a “Computer 
administrator” user account.
 Be sure to close all running programs before 
installing the software.
 The dialog boxes shown in this section are from 
Windows Vista, unless otherwise specified. The 
installation procedures and the dialog boxes shown 
differ depending on the operating system.
1Turn on your PC, start Windows, 
and insert the supplied CD-ROM 
into the CD-ROM drive of your PC.
The installation window is displayed.
Notes
 If the installation window is not displayed  
automatically, double-click the “Setup.exe” 
file on the CD-ROM.
 In Windows Vista, the AutoPlay window 
may appear. Even if this occurs, select 
“Setup.exe” execution and install the driver 
according to the instructions on the screen.
2Click “Installing Printer Driver.”
The “InstallShield Wizard” dialog box is 
displayed. Connector: USB connector
Drive: CD-ROM drive (to be used for 
software installation)
Installing the printer driver
Downloaded From ManualsPrinter.com Manuals 
						

							39 GB
    Printing from a PC
3Click “Next.”
The license agreement dialog box is 
displayed.
4Read the agreement thoroughly, 
and if you agree, check “I accept 
this agreement” and click “Next.”
When an older version of the printer 
driver has been installed on your 
computer, the message “Older version of 
the printer driver has been found.” may 
appear on the screen. Click “Yes,” and 
follow the displayed instructions to restart 
your PC. Then, perform the installation 
procedures again. After the computer is 
restarted, the older version of printer 
driver will be deleted. If you install the 
new version of printer driver, you can use 
the new version of printer driver.
5Click “Install.”
Installation starts.
6When the “Sony DPP-FP67/77 
printer driver has been successfully 
installed.” dialog is displayed, click 
“Finish.”
7Press the 1 (on/standby) button to 
turn on the printer.
8Connect the USB connectors of the 
printer and your PC with either the 
supplied or a commercially available 
USB cable.
Note
If you use a commercially available USB cable, 
use a B-TYPE (the connector type of the printer 
side) cable shorter than 3m in length.
9Wait for a while, then check to see 
that “Sony DPP-FP67” or “Sony 
DPP-FP77” has been added to the 
“Printers” or  “Printers and Faxes.”
10When the installation is complete, 
remove the CD-ROM from your PC 
and keep it for future use.
To continue the process and install the 
PMB software, follow the procedures 
from step 2 on page 41.
To USB 
connector
To USB connector
Windows PC
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							40 GB
Notes
 If the installation fails, remove the printer from 
your PC, restart your PC, and then follow the 
installation procedures from step 1 again.
 After installation, the “Sony DPP-FP67” or “Sony 
DPP-FP77” is not yet set as the default printer. Set 
the printer you use for each application.
 The supplied CD-ROM will be required when you 
uninstall or re-install the printer driver. Keep it for 
possible future use.
 Before you use the printer, read the Readme file 
(the Readme folder of the CD-ROM c English 
folder c Readme.txt).
When the software is installed
The   icon is displayed on the Windows 
desktop, as well as a shortcut to the web site for 
printer customer registration. After you finish 
registration, you can find support information 
at: http://www.sony.net/registration/di/
Uninstalling the printer driver
When the printer driver becomes unnecessary, 
please follow the procedures below to remove 
the printer driver:
1Disconnect the USB cable from your printer 
and the PC.
2Insert the supplied CD-ROM into the CD-
ROM drive of your PC.
The installation window is displayed.
Note
If the installation window is not displayed 
automatically, double-click the “Setup.exe” file 
on the CD-ROM.
3
Click “Installing Printer Driver.”
The “InstallShield Wizard” dialog box is 
displayed.
4Click “Next.”
The license agreement dialog box is 
displayed.
5Read the agreement thoroughly, and if you 
agree, check “I accept this agreement” and 
click “Next.”
The confirmation dialog box used for 
removing the software is displayed.
6Click “Yes.”
The confirmation dialog box used for restart 
is displayed.
7Check “Yes, I want to restart my computer 
now” and click “OK.”
After the computer is restarted, the relevant 
files will be deleted and uninstallation is 
complete.
Downloaded From ManualsPrinter.com Manuals