Sony DPP FP67 User Manual

							21 GB
Direct printing
You can change the settings during printing, the printer settings, and on-screen display 
settings. 
6 Print setup .page 29
Downloaded From ManualsPrinter.com Manuals 
						

							22 GB
Exposure and Red-eye 
Correction
1Display an image that you want to 
adjust and then press the AUTO 
TOUCH-UP button.
The correction of the selected image 
starts. The results of the adjustment will 
be displayed on the screen. 
To display the original image 
(before correction) again
Press the AUTO TOUCH-UP button. To 
display the adjusted image, press the 
AUTO TOUCH-UP button again.
To cancel correction
Press CANCEL. 
Tip
Although you can check the exposure and red-
eye correction status by pressing ENTER and 
enlarging an image, the image to be printed is 
not enlarged. To print an enlarged and corrected 
image, first enlarge an image and then perform 
the correction.
If you have set print quantity for 
multiple images
All the images with print quantity settings 
are adjusted. To display other images, 
press g/G.
To set the print quantity 
Before you press the AUTO TOUCH-UP 
button, set the print quantity (page 17). 
You cannot set or change print quantity 
after you finish the correction. To change 
the print quantity setting, cancel the 
correction.
Tips
 If there are no images with print quantity 
settings, the correction adjusts the image 
being previewed.
 If there are other images with print quantity 
setting, and print quantity is not specified 
for the image being previewed, the image 
being previewed will not be corrected. The 
images with print quantity settings will be 
adjusted.
 If you enlarged an image, only the enlarged 
image will be adjusted and then printed. 
2Press PRINT.
Printing of the image being adjusted starts. 
When the print quantity setting is 
specified, the specified number of copies 
are printed.
Tips
 Adjustment takes effect only on the image being 
printed. The original image will not be adjusted.
 You cannot perform editing on an image after the 
correction.
Notes
 Depending on the image, the exposure 
phenomenon may not be correctable. In this case, 
select “Adjust” from the Edit menu to adjust the 
brightness manually (page 23).
 Depending on the image, the red-eye phenomenon 
may not be corrected. 
 When you cancel the edits by selecting   (Reset) 
in the Edit menu, the correction will also be 
cancelled.
 During the correction process, an animation to 
show reading and handling of data from a memory 
card or a USB memory will be displayed. While 
the animation is displayed, do not remove the 
memory card or disconnect USB memory.
 You cannot select only Red-eye Correction or only 
Exposure Correction.
 Depending on the condition of the image, the 
correction may take some time.
The automatic red-eye 
correction of this printer uses 
the technology of FotoNation 
Inc. in the U.S.A.
Downloaded From ManualsPrinter.com Manuals 
						

							23 GB
Direct printing
Editing an image
1From the   Edit menu (page 20), 
press g/G to select   (Enlarge) to 
enlarge an image or   (Reduce) 
to reduce it, and then press ENTER.
Each time you press the button, the image 
becomes larger or smaller:
 : up to 200%
 : down to 60%
2Press PRINT.
Note
The picture quality of an enlarged image may 
deteriorate depending on its size.
1From the   Edit menu (page 20), 
press g/G to select   (Move) and 
then press ENTER.
The g/G/f/F indicators appear on the 
left/right/above/below the image and you 
can move the image.
2Press  g/G/f/F to move an image.
The image moves in the selected direction.
3Press ENTER.
The image is fixed in its current position.
4Press PRINT.
1From the   Edit menu (page 20), 
press g/G to select    (Rotate) and 
then press ENTER.
Each time you press ENTER, the image 
rotates 90° clockwise.
2Press PRINT.
1From the   Edit menu (page 20), 
press g/G to select    (Adjust) and 
then press ENTER.
The Adjust menu is displayed.
2Press g/G to select the desired 
adjustment tool and press ENTER.
The adjustment screen of the selected tool 
appears.
Enlarging and reducing an 
image size 
Moving an image 
Rotating an image 
Adjusting an image
Icons Meaning
BrightnessAdjusting the Brightness
TintAdjusting the Tint 
SaturationAdjusting the Saturation
SharpnessAdjusting the Sharpness
Exiting the Adjust menu.
Saves and reflects the 
editions made and returns to 
the previous step.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							24 GB
       When   (Brightness) is selected
Press g/G to adjust an image while 
checking the level of brightness, for 
example.
Brightness: Press G to brighten the 
picture or g to darken it.
Tint: Press G to make the picture 
greenish or g to make it reddish.
Saturation: Press G to deepen the 
colors or g to lighten the colors.
Sharpness: Press G to sharpen the 
outlines or g to soften them.
3Press ENTER.
The adjustment is executed and you can 
select other adjustment option.
4Press g/G to select  (Exit) and 
then press ENTER.
The Adjust menu will be closed.
5Press PRINT.
1Press g/G to select   (Print) and 
then press  ENTER. Or, press 
PRINT.
The print window is displayed. The print 
quantity is displayed.
2Set the print quantity.
 To increase the print quantity one by 
one, press f repeatedly.
 To reduce the print quantity one by one, 
press F briefly repeatedly.
3Press ENTER.
1Press g/G to select   (Reset) and 
then press ENTER.
The confirmation window is displayed.
2Press f/F to select “OK,” and press 
ENTER.
The settings in the Edit menu and 
exposure and red-eye correction are 
disabled, and the image is reset to the state 
it was in before editing. 
The Edit screen or Adjust screen is 
displayed again. If you press CANCEL or 
select “CANCEL” and press ENTER, the 
previous window is displayed.
                      Slider
Printing an edited image 
Undoing the operations 
Downloaded From ManualsPrinter.com Manuals 
						

							25 GB
Direct printing1Press g/G to select   (Exit) and 
then press ENTER.
The confirmation window is displayed.
2Press f/F to select “OK,” and press 
ENTER.
The menu operations are terminated and 
the window displayed before entering the  
menu is displayed again. 
If you press CANCEL or select 
“CANCEL” and press ENTER, the 
previous window is displayed.
Making a Layout 
Print
1From the main menu (page 19), 
press g/G/f/F to select   
(Layout Print), then press ENTER.
The Layout Print templates are displayed.
2Press g/G/f/F to select the desired 
template, then press ENTER.
The preview of the selected template is 
displayed
3Select an image.
When you select a template with multiple 
images, repeat the procedures below to 
select an image for each area.
1Press g/G/f/F to select an image area, 
then press ENTER.
The image list is displayed.
2Press g/G/f/F to select the desired 
image, then press ENTER.
The window used for adjusting the 
image is displayed.
For adjustment, see “Adjusting an 
image” on page 23. 
You can adjust the image automatically 
by pressing the AUTO TOUCH-UP 
button (page 22). After the correction is 
performed, you cannot do other 
adjustments. Make sure to perform the 
correction after you finish other 
adjustments.
4Press g/G to select   and press 
ENTER.
The selected image is added to the image 
area.
5Press PRINT.
Exiting the menu 
Downloaded From ManualsPrinter.com Manuals 
						

							26 GB
Making Batch Print  
(Index Print/Print All/DPOF Print)
 Index Print
You can print a list (index) of all the images 
stored in a memory card or a USB memory, 
which allows you to check the contents of 
the selected media easily.
The number of split panes on a sheet is fixed 
to 8 horizontally by 6 vertically.

You can print all the images stored on a 
memory card or a USB memory at one time.

The images which are DPOF (Digital Print 
Order Format) preset for printing are 
displayed with the print mark ( ) in an 
image preview. You can print those images 
at one time. The images are printed with the 
preset number of copies in the order they 
were displayed.
Notes
 For how to preset images for printing, refer to the 
manual of your digital camera.
 Some types of digital cameras do not support the 
DPOF function, or the printer may not support 
some of the functions of the digital camera.
1From the main menu (page 19), 
press g/G/f/F to select   (Batch 
Print) and then press ENTER.
The Batch Print menu is displayed.
2Press g/G to select   (Index 
Print),    (Print All), or   (DPOF 
Print)  and then press ENTER.
The confirmation dialog box is displayed.
Note
If there are no DPOF preset images when you 
selected “DPOF Print,”  an error message will 
be displayed.
3To start printing, press f/F to select 
“OK” and press ENTER.
When you select “OK” printing starts. 
Tips
 To stop printing, press CANCEL and press 
ENTER in step 3. 
 When the “Date Print” item of the Print setup 
menu is set to “ON,” the date the image was shot 
or saved is not printed in the Index Print mode.
Downloaded From ManualsPrinter.com Manuals 
						

							27 GB
Direct printing
Making a Calendar 
You can create a calendar by combining an 
image stored on the memory card or USB 
memory device and a desired template.
1From the main menu (page 19), 
press g/G/f/F to select 
(Calendar) and then press 
ENTER.
The window used for selecting the 
calendar template, is displayed.
2Press g/G/f/F to select the desired 
template, and then press ENTER.
The preview of the selected template is 
displayed.
Tip
You can select and set an image area or calendar 
area in any order.
3Select an image.
When you select a template with multiple 
images, repeat the procedures below to 
select an image for each area.
1Press g/G/f/F to select an image area, 
then press ENTER.
The image list is displayed.
2Press g/G/f/F to select the desired 
image, then press ENTER.
The window used for adjusting the 
image is displayed.For adjustment, see “Adjusting an 
image” on page 23. 
You can adjust the image automatically 
by pressing the AUTO TOUCH-UP 
button (page 22). After the correction is 
performed, you cannot do other 
adjustments. Make sure to perform the 
correction after you finish other 
adjustments.
When you adjust an image, the image is 
added to the image area.
Tip
Perform editorial operations such as enlarging, 
reducing the size of, rotating, or moving an 
image first, and then push the AUTO TOUCH-
UP button. If Auto Touch-up is performed first, 
the other adjustments do not take effect.
4Set the calendar.
1Press g/G/f/F to select the calendar 
area and press ENTER.
The calendar setting window is 
displayed.
Image area Calendar area
Items Procedures
/Increases or reduces the 
size of an image when 
ENTER is pressed.
Move the image with
 
g/G/f/F, and then press 
ENTER.
Each time you press 
ENTER, the image rotates 
90° clockwise.
When you press ENTER, 
the Adjust menu is 
displayed. (page 23)
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							28 GB
2Press f/F to select the item that you 
want to set, and then press ENTER.
Press g/G/f/F to select   and press 
ENTER.
The calendar is displayed in the calendar 
area.
5Press PRINT.
Making an ID Photo 
1From the main menu (page 19), 
press g/G/f/F to select   (ID 
Photo) and then press ENTER.
The window used for setting the height 
and width of an ID photo is displayed.
Tip
You can set a maximum size of 7.0 (width) × 
9.0 (height) cm.
2Press g/G/f/F to select “Height” or 
“Width” to be adjusted and press 
ENTER.
The cursor moves to the number input 
area of the selected item.
 To specify the unit: Select either “cm” or 
“inch.”
 To specify the height: Select the figure box 
at the right of the photo frame.
 To specify the width: Select the figure box 
in the upper of the photo frame.
3Press f/F to set the size and then 
press ENTER.
The ID photo preview of the specified size 
is displayed.
4If you want to specify another  size, 
repeat steps 2 and 3.
Item Settings/Procedures
Start Y/MSet the first month and the 
year starting the calendar. 
Press 
g/G to select the 
month or year and press 
f/F to set the number. 
Press ENTER.
Start Day 
and Date 
colorSet the combination of the 
day of the week placed 
furthest left in the calendar 
and set the color of Sunday 
and Saturday. Press f/F to 
select from among four 
options, and press ENTER.
Downloaded From ManualsPrinter.com Manuals 
						

							29 GB
Direct printing
5Press f/F to select   and press 
ENTER.
The window used for selecting an image is 
displayed.
6Press g/G/f/F to select the desired 
image, and then press ENTER.
The window used for adjusting the image 
position is displayed.
For adjustment, see step “Adjusting an 
image” on page 23.
You can also change a color photo into a 
monochrome one.  Select   
(Monochrome) and press ENTER. You 
can select this option while making an ID 
photo.
7Press g/G to select   and press 
ENTER.
A preview of the ID photo print is 
displayed.
8Press PRINT.
Note
An ID photo printed may not be able to be acceptable  
for use in an identification card or passport. Please 
check the requirements for the photo to be used in the 
instructions before you submit the card or passport.
Changing the settings 
When the image is recorded using the DCF 
(Design rule for  Camera File system) format, 
you can print an image with  the date of 
shooting that is recorded as part of shooting 
information. You can select “ON” or “OFF” of 
date print and the order of year/month/day.
1From the   (Print setup) menu, 
press g/G/f/F to select   (Date 
Print) and then press ENTER.
The Print setup menu is displayed.
2Press g/G to select   (Date Print) 
or   (No Date Print) , and press 
ENTER.
3To set the order of the date print, 
press F to select  ,  and 
then press g/G to select the desired 
order:
 D-M-Y: The date is displayed in the 
order of day, month and year.
 M-D-Y: The date is displayed in the 
order of month, day and year.
 Y-M-D: The date is displayed in the 
order of year, month and day.
Setting the Date Print   
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							30 GB
4Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Borders/Borderless Print) and then 
press ENTER.
The Borders/Borderless Print menu is 
displayed.
2Press g/G to select the desired print 
finish.
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
Notes
 When you select “Borderless,” a standard 4:3 
picture shot by a digital camera may be printed 
with the top and bottom edges cut and it is printed 
as a 3:2 picture.
 When you select “Borders (Pattern 2),” the top and 
bottom edges or right and left edges may be 
trimmed and printed depending on the image.
1From the   (Print setup) menu, 
press g/G/f/F to select   (On-
screen Display) and then press 
ENTER.
The On-screen Display menu is displayed.
2Press g/G to select the desired 
setting item.
Setting the print finish 
(Borders/Borderless Print)
Items Procedures
Borderless
: Prints an image 
without blank space around 
the image. 
Borders (Pattern 1): Prints 
an image with borders 
around the image, without 
cutting the image. 
Borders (Pattern 2): Prints 
an image while leaving 
almost-equal borders in the 
top, bottom, right and left 
around the image. 
Setting the On-screen Display 
Items Procedures
On-screen Display is off. 
In an image preview, 
information other than the 
print quantity and input 
setting is not displayed.
On-screen Display is on. In 
an image preview, 
information such as the 
number of selected images, 
shot date, and the details of 
an image file will be 
displayed in addition to the 
print quantity setting and 
input setting.
Downloaded From ManualsPrinter.com Manuals