Sony Digital Camcorder DSR PD150 Operating Instructions
Here you can view all the pages of manual Sony Digital Camcorder DSR PD150 Operating Instructions. The Sony manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 141
Additional Information 141 Compatibility of DVCAM and DV formats Compatibility on editing using DV connectorsWhen this digital camcorder is connected to other DVCAM or DV video equipment using DV connectors, the recording format of edited tapes is defined according to recorder’s format as described below. Source tape Player’s format Recorder’s format Recording format DVCAM-formatted 2) 3)DVCAM DVCAM DVCAM DVCAM-formatted DVCAM DV DV 4) DVCAM-formatted 2)DV 5)DVCAM DVCAM 7) DVCAM-formatted DV 5)DV DV 4)...
Page 142
142 Usable cassettes Selecting cassette types You can use the mini DVCAM cassette* and mini DV cassette* in this camcorder. You cannot use any other DV, 8 mm, Hi8, Digital 8, VHS, S-VHS, VHSC, S-VHSC, Betamax or ED Betamax cassette. *There are two types of mini DVCAM/mini DV cassettes: with cassette memory and without cassette memory. Tapes with cassette memory have (Cassette Memory) mark. Sony recommends that you use a tape with mark to enjoy your camcorder fully. The IC memory is built in...
Page 143
Additional Information 143 Usable cassettes Audio mode Fs32K (12-bit) mode: The original sound can be recorded in channels 1 and 2, and the new sound in channels 3 and 4 in 32 kHz. The balance between channels 1/2 and channels 3/4 can be adjusted by selecting AUDIO MIX in the menu settings during playback and audio dubbing. Both sounds can be played back. You can monitor the sound during audio dubbing. Fs48K (16-bit) mode: A new sound cannot be recorded but the original sound can be recorded in high...
Page 144
144 About i.LINK Your camcorder is equipped with the DV input/output connector based on i.LINK (IEEE1394) standard. This section explains the specifications and features of i.LINK. What is i.LINK? i.LINK is a digital serial interface designed to integrate the devices equipped with i.LINK connector. By connecting i.LINK devices, i.LINK allows your device to: –Transmit and receive data such as digital audio and digital video signals in two ways –Control other i.LINK devices –Easily connect with another...
Page 145
Additional Information 145 Troubleshooting If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If “C:ss:ss” appears on the LCD screen, display window or in the viewfinder, the self-diagnosis display function has worked. See page 151. In the recording mode Symptom START/STOP does not operate. The power goes off. The image on the...
Page 146
146 Troubleshooting Symptom Some tiny white spots appear on the LCD screen or in the viewfinder. The click of the shutter does not sound. The image is not bright even if you use the video flash light. In the playback mode Symptom The tape does not move when a video control button is pressed. The playback button does not function. There are horizontal lines on the picture or the playback picture is not clear or does not appear. No sound or only a low sound is heard when playing back a tape. The title...
Page 147
Additional Information 147 Troubleshooting Symptom Displaying the recorded date, date search function does not work. The new sound now being added, or that has been added to the recorded tape is not heard. The title is not displayed. The sound is muted or images do not appear when monitoring images through TV. In the recording and playback modes Symptom The power does not turn on. The end search function does not work. The end search functiondoes not work correctly. The picture does not appear in the...
Page 148
148 Troubleshooting Symptom The cassette cannot be removed from the holder. The % and Z indicators flash and no functions except for cassette ejection work. indicator does not appear when using a tape with cassette memory. Remaining tape indicator is not displayed. When operating using the “Memory Stick” Symptom Operations do not function. Recording does not function. The image cannot be deleted. You cannot format the“Memory Stick.” Deleting all the images cannot be carried out. You cannot protect the...
Page 149
Additional Information 149 Troubleshooting Symptom The photo save function does not work. Others Symptom The title is not recorded. The cassette label is not recorded. While editing using the i.LINK cable (DV connecting cable), recording picture cannot be monitored. Digital program editing does not function. Cause and/or Corrective Actions •The write-protect tab on the “Memory Stick” is set to LOCK. cSet the tab to write. (p. 113) •The battery pack is dead. cInstall a charged battery pack or use the AC...
Page 150
150 Troubleshooting Symptom The Remote Commander supplied with your camcorder does not work. The input picture does not appear on the LCD screen or in the viewfinder when your camcorder is connected to outputs on the TV or VCR. The melody or beep sounds for five seconds. When charging the battery pack, no indicator appears or the indicator flashes in the display window. You cannot charge thebattery pack. The camcorder is immediately turned off even if the amount of the battery remaining time is enough...