Sony Dav X1 Operating Instructions

Other Operations
71GB
Operating for the THEATRE 
SYNC function
Point the remote to the direction of TV and this 
system, then press THEATRE SYNC once.
While transmitting the code from the remote, the 
TV button flashes.
If this function does not work, change the 
transmit time. The transmit time varies 
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the 
code for transmit time (see the table) using the 
number buttons.
The transmit time from the remote is...

72GB
With VIDEO CDs, CDs, or DATA CDs, you 
can select the sound from the right or left 
channel and listen to the sound of the selected 
channel through both the right and left speakers. 
For example, when playing a disc containing a 
song with the vocals on the right channel and the 
instruments on the left channel, you can hear the 
instruments from both speakers by selecting the 
left channel.
1Press AUDIO during playback.
The following display appears.
2Press AUDIO repeatedly to select the 
desired...

Other Operations
73GB
 [2:2/R]: the sound of the right channel of 
the audio track 2 (monaural)
 While playing a Super VCD on which the audio track 
2 is not recorded, no sound will come out when you 
select [2:STEREO], [2:1/L], or [2:2/R].
 You cannot change the sound for Super Audio CDs.
To check the audio signal format 
(DVD VIDEO, DivX video only)
If you press AUDIO repeatedly during 
playback, the format of the current audio signal 
(PCM, Dolby Digital, DTS, etc.) appears on the 
screen. This...

74GB
Reinforcing bass frequencies
You can reinforce bass frequencies on any 
source. 
1Make sure the function is set to “DVD.”
If not, press FUNCTION repeatedly until 
“DVD” appears in the front panel display.
2If a disc is playing, press x to stop, 
then press WOOFER.
The SPEAKER SETUP appears.
3Select the desired subwoofer level 
using X/x, then press ENTER.
The setting is selected and setup is 
complete.
Enjoying the sound at low 
volume
xNIGHT MODE
In this mode, you can enjoy sound effects or...

Other Operations
75GB
You can enjoy the sound of other components 
with this system. Connect the satellite receiver 
or components with a high audio output level 
(including 2V output components, such as MD 
decks, etc.) to the VIDEO 1/SAT 1 or VIDEO 2/
SAT 2 jacks, and perform the following to 
prevent distortion occurring.
Refer to the operation manual supplied with the 
components for further information on their 
operation.
Lowering the input sensitivity 
of the VIDEO 1/SAT 1 jack
1 Press FUNCTION...

76GB
You can enjoy multiplex broadcast sound when 
the system receive the AC-3 multiplex broadcast 
signal.
You can play bilingual broadcasts recorded on 
DVD-RWs in VR mode.
 To receive the AC-3 signal, you need to connect a 
digital satellite tuner to the system with an optical 
cable or coaxial cable (page 28) and set the digital 
output mode of the digital satellite tuner to 
AC-3.
1Press AMP MENU.
2Press x/X repeatedly until “DUAL 
MONO”
 appears in the front panel 
display, then press ENTER or c....

Other Operations
77GB
6Press X/x to select the preset number 
you want.
7Press ENTER.
The station is stored.
8Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Listening to the radio
Preset radio stations in the system’s memory 
first (see “Presetting radio stations” (page 76)).
1Press FUNCTION repeatedly until “FM” 
or “AM” appears in the front panel 
display.
The last received station is tuned in.
2Press PRESET + or – repeatedly to 
select the preset station you...

78GB
Viewing the Station Name or 
Frequency in the front panel 
display
When the system is set to “TUNER AM” or 
“TUNER FM,” you can check the frequency 
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display 
changes as shown in the charts.
*1This is displayed if you have entered a name for a 
preset station (page 77).
*
2Returns to the original display when several seconds 
has elapsed.
(Except for Russian model)
What is the Radio Data 
System?
The Radio Data System...

Other Operations
79GB
You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
You can preset the time in 10 minutes 
decrements.
Press SLEEP.
Each time you press this button, the minutes 
display (the remaining time) changes as follows:
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired 
time.
To cancel the Sleep Timer 
function
Press SLEEP repeatedly until “SLEEP  OFF” 
appears in the front...

80GB
 
You can return the system parameters, such as 
preset stations, to the default settings.
1Press "/1 to turn on the system.
2Press and hold in order FUNCTION, 
VOLUME–, "/1 on the system. 
“COLD RESET” appears in the front panel 
display and the default settings are returned.
Returning to the Default 
Settings
"/1VOLUME–
FUNCTION