Sony Dav X1 Operating Instructions

Getting Started
21GB
A To connect to a TV with the SCART input jack
Connect the system to your TV using the SCART (EURO AV) cord (not supplied). 
Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO TV) jack on the 
system.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to VIDEO signal 
or RGB signals. If the TV conforms to VIDEO signal, change the input mode of the TV to RGB signals. 
Refer to the operating instructions supplied with the TV to be...

22GB
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image. 
To display using this method, you need to connect to a TV that accepts progressive signals.
“P AUTO” or “P VIDEO” appears in the front panel display when the system outputs progressive 
signals.
1Press FUNCTION repeatedly to select “DVD.”
2Press PROGRESSIVE.
Each time you press PROGRESSIVE, the display changes as follows:
xP AUTO (PROGRESSIVE AUTO)
Select...

Getting Started
23GB
either of the above conditions is not met.
xINTERLACE
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (MONITOR 
OUT (VIDEO/S VIDEO)/EURO AV 
T OUTPUT (TO TV)).
About DVD software types and the conversion method
DVD software can be divided into 2 types: film-based software and video-based software. 
Video-based software is derived from TV, such as dramas and sit-coms, and displays...

24GB
Connecting the audio cords
Outputs TV sound through the speakers of this system.
When you want to output stereo (2-channel) TV sound from the system speakers, choose connection 
A or B below.
The quality of the audio increases from A to B.
ATo connect the EURO AV t INPUT (FROM VIDEO)  jack of a TV to the 
EURO AV T OUTPUT (TO TV) jack of this system
Connect the system to your TV using the SCART (EURO AV) cord (not supplied). 
Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO...

Getting Started
25GB
BTo connect the COAXIAL DIGITAL OUT jack of a TV to the TV 
COAXIAL DIGITAL IN jack of this system
Connect a TV to the TV COAXIAL DIGITAL IN jack using a coaxial digital cord (not supplied).
 To listen to the TV sound, select the function by pressing FUNCTION. For details, see page 40.
 When you use both the EURO AV 
T OUTPUT (TO TV) jack (analogue connection) and the COAXIAL 
DIGITAL IN jack (digital connection) at the same time, the digital connection takes priority.
Tip
Note
 

26GB
 
You can enjoy a variety of other components connected to the system.
Be sure to make connections securely to avoid hum and noise.
Connecting the video cords
The quality of the picture increases from A to B.
A To connect the VIDEO OUT jack of other component to the VIDEO IN 
jack of this system
Connect a VCR or other component to the VIDEO IN jack using a video/audio cord (not supplied). 
When connecting a cord, be sure to match the color-coded sleeve to the appropriate component jack.
Step 4:...

Getting Started
27GB
B To connect the S VIDEO OUT jack of other component to the S VIDEO 
IN jack of this system
Connect a VCR or other component to the S VIDEO IN jack using an S video cord (not supplied).
Connecting the audio cords
The quality of the audio increases from  to  , 
. 
 To connect the AUDIO OUT jacks of other component to the AUDIO 
IN jacks of this system
Connect a VCR or other component to the AUDIO IN jacks using an video/audio cord (not supplied). 
When connecting the cords, be sure to...

28GB
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL 
or OPTICAL) jack
The digital satellite receiver can be connected to the VIDEO 1/SAT 1 OPTICAL or COAXIAL 
DIGITAL IN or VIDEO 2/SAT 2 COAXIAL DIGITAL IN jack instead of the VIDEO 1/SAT1 or 
VIDEO 2/SAT2 AUDIO IN jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue 
signals. If the digital signal ceases, the analogue signal will be processed after 2...

Getting Started
29GB
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the 
speakers to the system (page 16).
Connect the AC power cord (mains lead) to a wall outlet (mains).
The AC plug in the illustration is European & Russian models.
To turn on the system
Press "/1.
To turn off the system
Press "/1. The system enters standby mode.
While playing a disc, do not turn off the system by pressing "/1. Doing so may cancel the menu 
settings. When...

30GB
There are a minimum number of basic adjustments available for using the system.
You can set the display language, sound track, or screen settings that match your TV type, etc. 
Step 6: Performing the Quick Setup
"/1
./>
X/x
ENTER
 The selectable language is 
different depending on the area. 
 Make sure that the function is set 
to “DVD.”
NoteTo skip an adjustment, press >. To return to the previous 
adjustment, press ..
1Turn on the TV.
2Press [/1.
3Switch the input selector on your TV so that...