Sony Dav Is50 Operating Instructions

31GB
Getting Started
7 Connecting the AC power cord (mains lead)
Before connecting the AC power cords (mains lead) of the subwoofer and the surround amplifier to a 
wall outlet (mains), connect the front, center speakers to the subwoofer and surround speakers to the 
surround amplifier (page 23).
Note• After connecting the AC power cord (mains lead), wait about 20 seconds before turning on the power by pressing 
"/1.
RSURROUND SELECTOR
S-AIR ID
EZW-RT10
SPEAKER
SURROUND
PA I R INGCB
A
SURROUND
BACK...

32GB
Getting Started
To use the wireless system, you need to set up 
the surround amplifier. Before setting, make 
sure that the wireless transmitter and transceiver 
are inserted into the subwoofer and the surround 
amplifier correctly (page 25).
This wireless system is called “S-AIR”. 
For details of the S-AIR function, see “Using an 
S-AIR Product” (page 74).
The subwoofer transmits sound to the surround 
amplifier that is connected to the surround 
speakers. To establish sound transmission, 
perform...

33GB
Getting Started
To prevent the transmission by 
neighbours
To prevent the transmission from neighbours, 
you can identify the S-AIR main unit and 
the surround amplifier by performing the 
pairing operation. For details, see “Identifying 
the S-AIR main unit with a specific S-AIR sub 
unit (Pairing operation)” (page 77).
To attach the cover to the 
surround amplifier
After connecting and setting, you can attach the 
cover to the surround amplifier for organizing 
and storing excess speaker cords....

34GB
Getting Started
Follow the steps below to make the basic 
adjustments for using the system.
Note• When you connect the system and the TV with the 
component video cord (not supplied) or HDMI cable 
(not supplied), you need to set the type of video 
output for matching your TV. For details, see “Setting 
the type of video output to match your TV” (page 36).
1Turn on the TV.
2Press [/1 on the control unit and 
POWER on the surround amplifier.
The system turns on.
Note• Make sure that the function is...

35GB
Getting Started
Note• The ECM-AC2 jack is used for the supplied 
calibration microphone only. Do not connect 
other microphones.
10Press C/c to select [YES].
Note• Make sure that the headphones are not 
connected to the surround amplifier (page 74). 
You cannot operate following steps with the 
headphones connected.
• Before [AUTO CALIBRATION], be sure that 
the surround amplifier turns on and you install 
the surround amplifier in the appropriate 
location. If you install the surround amplifier in...

36GB
Getting Started
To recall the Quick Setup display
1Press FUNCTION repeatedly until “DVD” 
appears in the front panel display.
2Press   DISPLAY when the system is in 
stop mode.
The Control Menu display appears on the TV 
screen.
3Press X/x to select   [SETUP], then 
press .
The options for [SETUP] appear.
4Press X/x to select [QUICK], then press  .
The Quick Setup display appears.
Setting the type of video 
output to match your TV
Depending on the connection of the TV 
(page 26), select the type of...

37GB
Getting Started
Does your TV accept progressive 
signals?
Progressive is the method for displaying TV 
images which reduces flickering and sharpens 
the image. To use this method, you need to 
connect to a TV that accepts progressive signals.
1Press FUNCTION repeatedly until 
“DVD” appears in the front panel 
display.
2Press  DISPLAY while the system is 
in stop mode.
The Control Menu display appears on the 
TV screen.
3Press X/x to select  [SETUP], 
then press  .
The options for [SETUP] appear....

38GB
Basic Operations
Depending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted.
Refer to the operation details supplied with your disc.
Basic Operations
Playing a Disc
     
FUNCTIONVOLUME
"/1Z"/1
H
Disc slotFUNCTION
VOLUME +/– x
MUTING ./>
X/
Z Soft-touch buttons
Note• Soft-touch buttons function by touching lightly. Do not press 
them strongly.
• Do not place objects on the top of the control unit. Doing so 
may activate the soft-touch buttons or deactivate the...

39GB
Basic Operations
1Turn on your TV.
2Switch the input selector on the TV to this system.
3Press "/1.
The system turns on.
Unless the mode of the system is set to “DVD,” press FUNCTION on the remote or FUNCTION 
(soft-touch button) on the control unit to select “DVD.”
“No Disc” appears in the front panel display and the system is ready for loading the disc.
4Load a disc.
Push the disc into the disc slot until the disc is pulled in automatically.
The disc is drawn into the control unit...

40GB
Basic Operations
To save the power in standby mode
Press "/1 while the system turns on, then the system enters standby mode. To cancel standby mode, 
press "/1 once.
To enter power standby mode, make sure that the system is in the following status.
– [CONTROL FOR HDMI] is set to [OFF] (page 71).
– “S-AIR STBY” is set to “OFF” (page 76).
Note• When the system is turned off, do not push a disc into the control unit.
Additional operations
1)Except for JPEG image files.2)Scan speeds may differ...