Sony Dav Fz900 Operating Instructions

Disc
61GB
(page 69) is activated and loud sound may be 
output depending on the volume level of the 
system. You can prevent this by limiting the 
maximum level of the volume.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]
: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
[OFF]: Off.
Note This function is available only when [CONTROL 
FOR HDMI] is set to [ON].
x[YCBCR/RGB (HDMI)]
You can select the type of HDMI signal output 
from the HDMI OUT jack.
[
YCBCR]: The...

62GB
x[AUDIO DRC] (DVD VIDEO only)
You can compress the dynamic range of the 
sound track. [AUDIO DRC] is useful for 
watching movies at low volume late at night.
[OFF]
: No compression of dynamic range.
[STANDARD]: The system reproduces the 
sound track with the kind of dynamic range that 
the recording engineer intended.
[MAX]: The system compresses dynamic range 
fully.
Note [AUDIO DRC] works only for Dolby Digital.
x[TRACK SELECTION] (DVD VIDEO only)
You can give the sound track which contains the...

Disc
63GB
settings. For details, see “Returning the 
[SETUP] settings to the default” (page 102).
To obtain the best possible surround sound, set 
connection of the speakers and their distance 
from your listening position. Then use the test 
tone to adjust the level and the balance of the 
speakers to the same level.
x[CONNECTION]
If you do not connect center or surround 
speakers, set the parameters for [CENTER] and 
[SURROUND]. Since the front speaker and 
subwoofer settings are fixed, you cannot...

64GB
x[DISTANCE (SURROUND)]
When you move the surround speakers, be sure 
to set the parameters of the distance (B) from 
the listening position to the speakers.
You can set the parameters from 0.00 to 7.00 
meters
1) (0 to 23 ft).
[L/R] 3.00 m/10 ft
2)3)4): Set the surround speaker 
distance.
1)0.00 to 7.01 meters for North American models.2)When you perform the Quick Setup (page 32), the 
default settings are changed.
3)3.04 m/10 ft for North American models.4)This item appears when you set [SURROUND]...

Tuner
65GB
Presetting Radio 
Stations
You can preset 20 FM stations. Before tuning, 
make sure to turn down the volume to minimum.
1Press FUNCTION repeatedly until 
“TUNER FM” appears in the front panel 
display.
2Press and hold TUNING +/– until the 
auto scanning starts.
Scanning stops when the system tunes in a 
station. “TUNED” and “ST” (stereo 
program) appear in the front panel display.
3Press SYSTEM MENU.
4Press X/x repeatedly until “MEMORY” 
appears in the front panel display.
5Press  or c.
A...

66GB
Listening to the Radio
Preset radio stations in the system’s memory 
first (see “Presetting Radio Stations” (page 65)).
1Press FUNCTION repeatedly until 
“TUNER FM” appears in the front panel 
display.
The last received station is tuned in.
2Press PRESET +/– repeatedly to select 
the preset station.
Each time you press the button, the system 
tunes in one preset station.
Tip You can select the preset station number directly 
by pressing the number buttons.
3Adjust the volume by pressing 
VOLUME...

Tuner
67GB
If you make a mistake
Press C/c repeatedly until the character to 
be changed flashes, then press X/x to select 
the desired character. 
To erase the character, press C/c 
repeatedly until the character to be erased 
flashes, then press CLEAR.
7Press .
“COMPLETE” appears in the front panel 
display, and the station name is stored.
8Press SYSTEM MENU.
The system menu turns off.
When the system is set to “TUNER FM,” you 
can check the frequency using the front panel 
display.
Press DISPLAY.
Each...

68GB
Using the Control for 
HDMI Function for 
“BRAVIA” Sync
This function is available on TVs with the 
“BRAVIA” Sync function only.
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable, operation is simplified as 
below:
– Theatre Mode (page 69)
– One-Touch Play (page 69)
– System Power Off (page 69)
– System Audio Control (page 69)
– Volume Limit (page 70)
– Language Follow (page 70)
Control for HDMI is a mutual control function 
standard used by...

Control for HDMI/External Audio Device
69GB
2Press   DISPLAY while the system is 
in stop mode.
The Control Menu display appears on the 
TV screen.
3Press X/x to select   [SETUP], 
then press  .
The options for [SETUP] appear.
4Press X/x to select [CUSTOM], then 
press .
The Setup Display appears.
5Press X/x to select [HDMI SETUP], then 
press .
The options for [HDMI SETUP] appear.
6Press X/x to select [CONTROL FOR 
HDMI], then press  .
7Press X/x to select the setting, then 
press .
: On.
 [OFF]: Off....

70GB
sound is output from the system speakers 
automatically. 
 While you are watching the TV and the 
function of the system is switched to “DVD” 
or “USB,” sound of the selected system 
function is output from the system speakers; 
TV sound is not output via the TV speakers. 
 You can control the system’s volume by the 
remote of the TV.
 If you turn the system off or set the function of 
the system to other than “TV,” “DVD,” or 
“USB,” TV sound is output from the TV 
speakers.
You can also operate the...