Sony Dav D150 Operating Instructions

							OPERATION
31GB
DVD and Video CD Operation 
Playing a DVD and Video CD
Playback Setup 
zTurn on the TV and select the video input source con-
nected to the DVD/VCR Receiver. 
zAudio system: Turn on the audio system and select the
input source connected to the DVD/VCR Receiver.
z zSet the Output Source to DVD as shown in Selecting the
Output/Input Source on page 13.
1
Press ADVD to open the disc tray.
2
Place a disc on the tray, with the label facing up.  
When a double-sided DVD is inserted, make sure the
side you want to play is facing down.
3
Press ADVD to close the tray.
“READING” appears in the display window, and play-
back starts automatically. If playback does not start,
press H(PLAY).
In some cases, the disc menu might appear instead. 
If a menu screen is displayed
Amenu screen may appear automatically after loading a
DVD.
Use B/b/V/vbuttons to select the title/chapter you want to
view, then press ENTER/OK to start playback.
Press DVD TOP MENU or DVD MENU to return to the
menu screen.
zUse the number buttons to select the track you want to
view. Press RETURN to return to the menu screen.
zMenu setting and the exact operating procedures for
using the menu may differ depending on the disc. Follow
the instructions on the each menu screen.
You also may set PBC to Off under setup. See page 23.
Notes
zIf Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized (see
Parental Control, on page 22).
zDVDs may have a Region Code.
zYour DVD/VCR Receiver will not play discs that have a
Region Code different from your DVD/VCR Receiver.
The Region Code for this DVD/VCR Receiver is 2 (two). 
zDo not keep a fixed image displayed on the screen for a
long time.
General Features
Note
Unless stated otherwise, all operations described use the
remote control. Some features may also be available on
the Setup menu.
Resuming Playback 
When you stop the disc. the player remembers the point
where you pressed x(STOP) and “RESUME x” appears
on the TV screen. Press H(PLAY) and play will resume
from this point.Tip
To play from the beginning of the disc, press x twice, then
press H.
Notes
zDepending on where you stopped the disc, the recorder
may not resume playback from exactly the same point.
zThe point where you stopped playing is cleared when:
- Press xin the STOP mode.
Selecting Another TITLE 
If a disc has more than one title, you can select another
title as follows:
z zPress DVD DISPLAY, then press the appropriate num-
ber buttons (0-9).
z zPress DVD DISPLAY, then use B/bto select a title num-
ber, then press ENTER/OK.
Selecting Another CHAPTER/TRACK
If a title on a disc has more than one chapter or a disc has
more than one track, you can move to another
chapter/track as follows:
zPress .or >briefly during playback to return to
the beginning of the current chapter/track or to select the
next chapter/track.
z zPress .twice briefly to step back to the previous
chapter/track.
z zTo go directly to any chapter during playback, 
press DVD DISPLAY. Use V/vto select chapter/track
icon. Then, enter the chapter/track number with the num-
ber buttons (0-9). or use B/bto select chapter then,
press ENTER/OK.
Notes
zFor two-digit numbers, press the number buttons
(0-9) in rapid succession.
zOn a Video CD with PBC, you must set PBC to Off on
the setup menu to use this function. See page 23.
Search 
1Press mor Mfor about two seconds during play-
back.
The DVD/VCR Receiver will now go into SEARCH mode. 
2Press mor Mrepeatedly to select the required
speed: X2 b, 1 m, 2 m, 3 m(backward) or 
X2 B, 1 M, 2 M, 3 M(forward).
With a Video CD, the Search speed changes: 1 m, 2
m, 3 m(backward) or 1 M, 2 M, 3 M(forward).
3To return to playback, press H(PLAY).
Still Picture 
1Press X(PAUSE) during playback.
The DVD/VCR Receiver will go into PAUSE mode. 
2To return to playback, press X(PAUSE) again or H
(PLAY).
VCD1.1VCD2.0DVD
VCD1.1VCD2.0DVD
1 /31 /12VCD1.1VCD2.0DVD
1 /3DVD
CDVCD1.1VCD2.0DVD
VCD2.0
DVD
VCD1.1VCD2.0DVD
 
						

							32GB
DVD and Video CD Operation (Continued)
General Features (Continued)
Slow Motion 
1Press X(PAUSE) during playback.
The DVD/VCR Receiver will now go into PAUSE
mode. 
2Press SLOW tor Tduring pause mode.
The DVD/VCR Receiver will enter SLOW mode. 
3Use SLOW tor Tto select the required speed:  
4 t, 3 t, 2 tor 1 t(backward), or 4 T, 3 T, 
2 Tor 1 T(forward).
4To return to playback, press H(PLAY).
Note
Slow motion playback in reverse is not applicable for
Video CD.
Shuffle 
1Press SHUFFLE during playback or in Stop mode.
The unit automatically begins Shuffle Playback and
“SHUFFLE” appears on the TV screen.
2To return to normal playback, press SHUFFLE until
“NORMAL” appears on the TV screen.
Tip
By pressing >during Shuffle playback, the unit
selects another title (track) and resumes Shuffle play-
back.
Notes
z zThis function only works with DVD Karaoke discs and
Video CD without PBC.
z
zOn a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Shuffle function. See page
23.
z zAfter finishing the Shuffle playback mode, Shuffle
function is canceled.
Repeat 
DVD Video Discs - Repeat Chapter/Title/Off
1Press REPEAT when playing a disc.
The Repeat icon appears on the TV screen.
2Press REPEAT to select a desired repeat mode.
•CHAPT: repeats the current chapter.
•TITLE: repeats the current title on a disc.
•OFF: does not play repeatedly.
Video CDs - Repeat Track/All/Off
1Press REPEAT when playing a disc.
The Repeat icon appears on the TV screen.
2Press REPEAT to select a desired repeat mode.
•TRACK: repeats the current track
•ALL: repeats all the tracks on a disc.
•OFF: does not play repeatedly.Notes
zOn a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page
23.
zBy pressing >during Random playback, the unit
selects another title and resumes Random playback.
zWhen you press .twice or >during Repeat
mode to go to previous track or next track, repeat
mode is canceled. 
Repeat A-B 
To repeat a sequence in a title(track):
1During disc playback, Press A-B at your chosen start
point.
“A * ” appears briefly on the TV screen.
2Press A-B again at your chosen end point.“A B” appears briefly on the TV screen, and the repeat
sequence begins. 
3To cancel the sequence and return to normal play,
press A-B.
Note
Repeat A-B play may not work with some scene of the
DVD.
Time Search 
The Time Search function allows you to start playing at
any chosen time on the disc.
1Press DVD DISPLAY during playback. The on-screen
display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2Within 10 seconds, use V/vto select the Time Search
icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4Within 10 seconds, press ENTER/OK.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
3D Surround 
This unit can produce a 3D Surround effect, which 
simulates multi-channel audio playback from two 
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theatre system. 
1Press SOUND FIELD to select “3D SUR” during 
playback.
2To turn off the 3D Surround effect, press SOUND
FIELD again to select “BYPASS”.
Note
On DVD, you can select “3D SUR” only during playing 
2 channel audio.
3D SURBYPASS
VCD1.1VCD2.0DVD
-:--:--0:20:09DVD
A   BA—BA   *A—B
VCD1.1VCD2.0DVD
OFFALLTRACK
OFFTITLECHAPT
VCD1.1VCD2.0DVD
VCD1.1VCD2.0Karaoke DVD
VCD1.1VCD2.0DVD
 
						

							OPERATION
33GB
DVD and Video CD Operation (Continued)
Special DVD Features
Checking the contents of DVD Video 
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DVD DIS-
PLAY. Then, press the appropriate number button to
select an option. Or, use B/b/V/vbuttons to highlight
your selection, then press ENTER/OK.
Title Menu 
1Press DVD TOP MENU.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3To remove the title menu, press DVD TOP MENU
again.
DVD Menu 
1Press DVD MENU.
The disc menu is displayed.
2To remove the disc menu, press DVD MENU again.
Camera Angle 
If the disc contains sequences recorded from different
camera angles, the angle icon appears on the TV
screen. You can then change the camera angle if you
wish.
zPress ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing the Audio Language 
Press AUDIO repeatedly during playback to hear a 
different audio language or audio track.
Changing the Audio Channel 
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (ST, LEFT or RIGHT).
Subtitle 
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note
If  appears, the feature at that moment or with that
specific DVD.
Screen Saver
The screen saver picture appears when you leave the
DVD/VCR Receiver in Stop mode for about 5 minutes. 
1 ENGDVD
RIGHTLEFTST
VCD1.1VCD2.0
1 ENG
D
5.1 CHDVD
1 /1DVD
DVD
DVD
 
						

							34GB
Audio CD and MP3 Disc Operation
Playing an Audio CD and MP3
Disc 
The DVD/VCR Receiver can play MP3 formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3 disc, read the notes on MP3 files
on right.
1Insert a disc and close the tray.
Audio CD:Audio CD menu appears on the TV
screen go to step 4.
MP3 disc:The MP3/JPEG select menu appears on
the TV screen. Go to step 2
2Use V/vto select the MP3 then press
ENTER/OK. 
The MP3 disc Menu appears on the TV screen.
Press RETURN to move to the MP3/JPEG select
menu.
3UseV/vto select a folder, and ENTER/OK.
Alist of files in the folder appears.
If a list of files contains another folder, repeat step 3
once more.
Tip
If you are in a file list and want to return to the Folder
list, use the V/vto highlight and press ENTER/OK to
return to the previous menu screen.
4Use V/vto select a track then press H(PLAY)
or ENTER/OK. 
Playback starts. 
During playback, the current track’s elapsed playing
time will appear in the display window and menu.
Playback will stop at the end of the disc.
Press DVD TOP MENU to move to the next page.
Press DVD MENU to move to the previous page.
Audio CD Menu  MP3 disc Menu
5press x(STOP) to stop playback.
Notes on MP3 Files
About MP3
z
zAn MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
z zThe DVD/VCR Receiver can not read an MP3 file
that has a file extension other than “.mp3”.
MP3 Disc compatibility with this DVD/VCR
Receiver is limited as follows:
z zSampling Frequency : only at 44.1kHz
z
zBit rate : within 32 - 320kbps
z
zCD-R physical format should be “ISO 9660”
z
zIf you record MP3 files using the software which can-
not create a FILE SYSTEM, for example “UDF” etc.,
it is impossible to playback MP3 files. We recom-
mend that you use an ISO9660 file system.
z zAsingle session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it cannot
playback MP3 files. If you wish to playback MP3
files, format all the data in the disc or use a new one.
z zFile names should be named using 8 letters or less
and must incorporate “.mp3” extension 
e.g. “********.mp3”.
z zDo not use special letters such as “/ : * ? “ < > ” etc.
z
zTotal number of files on the disc should be less than
650.
This DVD/VCR Receiver requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are auto-
matically set to these standards. There are many differ-
ent types of recordable disc formats (including CD-R
containing MP3 files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Customers should also note that permission is
required in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be sought from the copyright owner.
MP3CD
ProgramCD
ST BYPASS 0: 56: 18
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Clear All
MP3
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8MP3
OFF 00:00
Program
Clear All
Program
MP3
OFF 00:001
Clear All
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
 
						

							OPERATION
35GB
Audio CD and MP3 Disc Operation (Continued)
Pause 
1Press X(PAUSE) during playback.
2To return to playback, press X(PAUSE) again or
press H(PLAY).
Selecting Another Track 
If a disc has more than one track, you can move to
another track as follows:
z zPress .or >briefly during playback to go to the
next track or to return to the beginning of the current
track.
z zPress .twice briefly to step back to the previous
track.
z zOn Audio CDs, to go directly to any track, enter the
track number using the number buttons (0-9) during
playback.
Note
For two-digit numbers, press the number buttons (0-9)
in rapid succession.
Search 
1Press mor Mfor about two seconds during 
playback.
The DVD/VCR Receiver will now go into SEARCH mode. 
2Press mor Mrepeatedly to select the required
speed: 1 m, 2 m, 3 m(backward) or 1 M, 2
M, 3 M(forward).
Search speed and direction are indicated on the menu
screen.
3To return to playback, press H(PLAY).
Shuffle 
1Press SHUFFLE during playback or in Stop mode.
The unit automatically begins Shuffle Playback and
“SHUFFLE” and “SHUF” appears in the display 
window and menu screen.
2To return to normal playback, press SHUFFLE
repeatedly until “SHUFFLE” and “SHUF” disappears
from the display window and menu screen.
Tip
By pressing >during Shuffle playback, the unit
selects another track and resumes Shuffle playback.
Note
After finishing the Shuffle playback mode, Shuffle func-
tion is canceled.
Repeat 
1Press REPEAT when playing a disc.
The Repeat icon appears on the TV screen.
2Press REPEAT to select a desired repeat mode.
•TRACK: repeats the current track
•ALL: repeats all the tracks on a disc.
•OFF: does not play repeatedly.
Note
When you press .twice or >during Repeat mode
to go to previous track or next track, repeat mode is
canceled. 
Repeat A-B 
To repeat a sequence in a track.
1During disc playback, press A-B at your chosen start-
ing point.
The Repeat icon and “
A* ” appears on the menu screen.
2Press A-B again at your chosen end point.
“A B” appears on the menu screen, and the repeat
sequence begins. 
3To cancel the sequence and return to normal play,
press A-B  again.
The Repeat icon and “OFF” appears on the menu screen.
3D Surround 
This unit can produce a 3D Surround effect, which 
simulates multi-channel audio playback from two 
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theatre system. 
1Press SOUND FIELD to select “3D SUR” during play-
back.
2To turn off the 3D Surround effect, press SOUND
FIELD again to select “BYPASS”.
Changing the Audio Channel 
Press AUDIO repeatedly during playback to hear a 
different audio channel (ST, LEFT, or RIGHT).
CD
CD
CD
OFFALLTRACK
MP3CD
MP3CD
MP3CD
MP3CD
MP3CD
 
						

							36GB
JPEG File Operation
Viewing JPEG Files on a Disc
This DVD/VCR Receiver can play discs with JPEG files.
Before playing JPEG files, read the notes on JPEG
Files on right.
1
Insert a disc and close the tray.
The MP3/JPEG select menu appears on the TV
screen.
2
Use V/vto select the JPEG then press
ENTER/OK. 
The JPEG menu appears on the TV screen.
3
UseV/vto select a folder, and ENTER/OK.
Alist of files in the folder appears.
Press RETURN to move to the MP3/JPEG select
menu.
Tip
If you are in a file list and want to return to the Folder
list, use the V/vbuttons on the remote to highlight
“
” and press ENTER/OK to return to the previous
menu screen.
4
Use V/vto select a file then press ENTER/OK or 
H(PLAY).
Viewing the file function starts. 
While viewing a file, press RETURN to move to the
previous menu (JPEG menu).
Press DVD TOP MENU to move to the next page.
Press DVD MENU to move to the previous page.
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use B/bto highlight the Slide
Speed then use V/vto select the option you want to
use, and press ENTER/OK. 
5
Press x(STOP) to stop viewing.
The JPEG menu appears.
Selecting another Files
Press .or >once while viewing a picture to
advance to the next file or to the previous file.
Still Picture 
1Press X(PAUSE) during slide show.
The DVD/VCR Receiver will now go into PAUSE
mode. 
2To return to the slide show, press H(PLAY) or 
X(PAUSE) again.
To flip the picture
Press V/vwhile showing a picture to flip the 
picture horizontally or a vertically.
To rotate picture
Press B/bwhile showing a picture to rotate the 
picture clockwise or counter clockwise.
To record the picture slide show
Press zREC/ITR to record. 
Notes on JPEG Files
z
zDepending upon the size and number of the JPEG
files, it could take a long time for the DVD/VCR
Receiver to read the disc’s contents. If you don’t see
an on-screen display after several minutes, some of
the files are too big — reduce the resolution of the
JPEG files to less than 2 mega pixels and burn anoth-
er disc.
z zTotal number of files and folders on the disc should
be less than 650.
z zSome disc may be incompatible due to different
recording format or condition of disc.
zIf the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
zFile names without “.jpg” extension will not be able to
be read by this DVD/VCR Receiver, even though the
files are shown as JPEG image files in windows
explorer.
JPEG
Slide Speed5/32 1024X768
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
JPEG
Off Folder15/32 Picture5.jpg1024X768
Slide SpeedOff
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8JPEG
MP3
JPEG
 
						

							OPERATION
37GB
Programmed Playback MP3VCD1.1VCD2.0CD
Programmed Playback with Audio CD
and MP3 Disc
The Program function enables you to store your favorite
tracks from any disc in the DVD/VCR Receiver memory.
Program can contain 30 tracks.
1
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
The  mark will appear to the right of the word
Program on the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode; 
the mark will disappear.
2
Select a track, then press ENTER/OK to place
the selected track on the Program list.
3
Repeat step 2 to place additional tracks on the
Program list.
Audio CD menu MP3 disc Menu
4
Press b.
The programmed track you selected last is highlighted on
the program list.
5
Press V/vto select the track you want to start
playing.
Press DVD TOP MENU to move to the next page.
Press DVD MENU to move to the previous page.
6
Press H(PLAY) or ENTER/OK to start.
Playback begins in the order in which you programmed
the tracks and “PGM” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
7
To return normal playback from pro-
grammed playback, press PROGRAM to
exit the Program Edit mode. Select a track
of CD (or MP3) list and then press
ENTER/OK or 
H(PLAY).
“PGM” indicator disappears in the display window.
Programmed Playback with Video CD
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 23.
1
Insert Video CD and close the tray.
2
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
Note
Press RETURN, PROGRAM or H(PLAY) to exit the
Program menu.
3
Follow steps 2-6 of “Programmed Playback with
Audio CD and MP3 disc” on left.
“PGM” and “PROGRAM” appears in the display window
and TV screen.
4
To return normal playback from 
programmed playback, press PROGRAM.
“PGM” indicator disappears in the display window.
Repeat Programmed Tracks 
1Press REPEAT when playing the programmed tracks.
The Repeat icon appears on the TV screen.
2Press REPEAT to select a desired repeat mode.
•TRACK: repeats the current track
•ALL: repeats all tracks on the program list.
•OFF: does not play repeatedly.
Erasing a Track from Program List
1Press PROGRAM during playback (Audio CD and
MP3 disc only) or stop to enter the Program Edit
mode.
The  mark will appear.
2Press bto move to the Program list.
3Use V/vto select the track that you wish to erase
from the Program list.
4Press CLEAR.
The track will be erased from the Program list.
Erasing the whole Program List
1Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2Use V/vto select “Clear All”, then press ENTER/OK.
The complete Program for the disc will be erased
Notes
zThe programs are cleared when the disc is removed.
zThe programs are cleared when another function mode
(VIDEO, radio etc.) is selected.
OFFALLTRACK
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8Program
VCD
Clear All
FILE 8
FILE 2
FILE 4
FILE 3Program
MP3
OFF 00:003
Clear All
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
ST 0: 56: 18
TRACK 1
TRACK 2
TRACK 3
TRACK 4TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 5
TRACK 6
TRACK 7
TRACK 8Program
CD
Clear All
BYPASS
 
						

							38GB
Speaker Setup
Yo u  can set your personal preferences on the DVD func-
tion mode.
Adjust the following settings for the built-in 5.1 channel
surround decoder.
1
Press SETUP/MENU.
The Setup menu appears.
2
Select “5.1 Speaker Setup” using the V/v
buttons on the setup menu.
3
While “5.1 Speaker Setup” is selected, 
press bbutton.
4
Press bbuttons to select the desired speaker.
5
Adjust options by using V/v/B/bbuttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
er (Left), Front speaker (Right), Center Speaker, Rear
speaker (Left), Rear  speaker (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press B/ bto adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
z zSubwoofer’s size is fixed “Large” and the other
speaker’s size are fixed “small”.
Distance
If you connected speakers to your DVD/VCR Receiver,
setting the Distance lets the speakers (except sub-
woofer) know how far the sound has to travel to reach
your set listening point. This allows the sound from each
speaker to reach the listener at the same time. 
(1 - 20 ft, 1 ft = 0.30 m)
Note
You can not set the distance of subwoofer speaker. 
Test 
Press ENTER/OK to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
z zFront Left (L)→Center→Front Right (R) →
Rear Right (R) →Rear Left (L)→Subwoofer
You can stop the test using V/v.
Return
Press ENTER/OK to return to the previous menu.
RR
Front L
Volume          0 dB
Size              Small
Distance        0.3m
Test
Return Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
5.1 Speaker Setup
Others Disc Audio
 
						

							OPERATION
39GB
Radio Operation
Presetting the Radio Stations
You can preset 30 stations for FM and AM. Before tun-
ing, make sure that you have turned down the volume.
Notes
z zThe On Screen Display for radio is not appeared
when:
•the TIMER appears in the display window.
•the DVD/VCR Receiver in recording mode.
1
1
Press TUNER FM/AM on the remote control until
the frequency band appears on the display and
TV screen.
2 2
Press PRESET (+/–) on the remote control to
select your desired radio channel.
3 3
Press TUNER FM/AM on the remote control to
select the desired band.
4 4
Hold down TUNING (+/–) on the remote control
for 1 or 2 seconds, and a station is searched for
automatically.
5 5
Press MEMORY on the remote control.
6
6
Repeat steps 2 to 5 to store other stations.
Listening to the Radio
Preset radio stations in the DVD/VCR Receiver memory
first (see “Presetting radio stations” on the left).
1 1
Press TUNER FM/AM on the remote control until
the frequency band appears on the display and
TV screen.
The last received station is tuned in.
2 2
Press PRESET (+/–) on the remote control
repeatedly to select the preset station you want.
Each time you press the button, the DVD/VCR Receiver
tunes in one preset station at a time.
3 3
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOL + or - on the
remote control repeatedly.
To Clear the Stored Radio
Stations
1 1
Press TUNER FM/AM on the remote control until
the frequency band appears on the display and
TV screen.
2 2
Press PRESET (+/–) on the remote control to
select your desired station.
3 3
Press CLEAR the remote control to clear the
stored radio station.
MEMORY, CLEAR   TUNER  03
FM   87. 55MHZ
          TUNER 06
FM   108. 00MHZ
MEMORY, CLEAR
          TUNER  07
  FM   87. 50MHZ
MEMORY, CLEAR
          TUNER 06
FM   108. 00MHZ
MEMORY, CLEAR
          TUNER 05
FM   103. 00MHZ
MEMORY, CLEAR
MEMORY, CLEAR          TUNER 04
FM   87.50MHZ
 
						

							40GB
Radio Operation (Continued)
Tuning into a Station Manually
1
1
Press TUNER FM/AM on the remote control until
the frequency band appears on the display and
TV screen.
2 2
Press TUNER FM/AM on the remote control to
select the desired band.
3 3
Press TUNING (+/–) on the remote control to
tune in the desired station.
For your reference
Weak FM stations
“STEREO” may flash when the weak FM stereo signal
is received, select another station.
To turn off the radio
Press @ / 1to turn the DVD/VCR Receiver off or select
another function mode (DVD or VIDEO).
Tuning into a Station Automatically
Hold down TUNING (+/–)on the remote control for 1 or
2 seconds, and a station is searched for automatically.
Note
The search may not stop at a station with a very weak
signal.
Muting
Press MUTING to mute your unit. 
You can mute your unit in order, for example, to answer
the telephone, MUTING appear in the display.
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time. 
RDS Tuning
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s call
sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services pro-
gramme (PS) if transmitted by the station.
RDS Display 
The RDS system is capable of transmitting a wide vari-
ety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name.
Pressing RDS on the remote control enables you to
show the station name.
Note
If the RDS services programme (PS) is not being trans-
mitted, the Display Window will show a PS NONEmes-
sage.