Sony Clie Peg Tj35 Handheld Instructions Manual

							Beaming151
Beaming between your CLIÉ handheld and 
another Palm OS
® PDA
What you can do with beaming
Your CLIÉ handheld is equipped with an IR (infrared) port that enables you to 
exchange data or applications with another Palm OS® PDA device that has an 
IR port. The IR port is located at the top of your CLIÉ handheld, behind the 
small dark shield.
You can beam the following information between your CLIÉ handheld and 
another Palm OS
® PDA device that has an IR port:
 The data of Address Book, Date Book, To Do List, or Memo Pad.
 All data in the category currently displayed in Address Book, To Do List, 
or Memo Pad.
 Address Book data that you designate as your business card.
 Add-on applications installed in the memory.
Note
Some applications are protected from copying and cannot be beamed. Applications 
marked with   cannot be copied.
IR Port
Location of the IR port may vary 
depending on your model. 
						

							Beaming152
Beaming between your CLIÉ handheld and another Palm OS® PDA
Beaming information
You can beam the data on your CLIÉ handheld to another Palm OS PDA 
device that has an IR port.
1Select the data, category, or business card you want to 
beam.
2Tap  (Menu).
The menu is displayed.
3Tap one of the following:
 The Beam command for an individual record
 In Address only: Beam Business Card
 Beam Category
Tip
You can also perform [Beam Business Card] by pressing   (the 
Address Book button) for about 2 seconds.
4When the Beam dialog box is displayed, point the IR port of 
your CLIÉ handheld directly to the IR port of another Palm 
OS PDA device.
The Beam dialog box shows that the transfer is complete.
Tip
For best performance of the data exchange, keep 4 to 8 inches (approximately 10 to 
20 centimeters) between your CLIÉ handheld and the other Palm OS PDA device. 
Do not place any obstacle between the devices. The optimum distance for beaming 
may vary depending on devices.
Location of the IR port may vary 
depending on your model.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Beaming153
Beaming between your CLIÉ handheld and another Palm OS® PDA
Sending applications via beaming
1Tap   (Menu) while the CLIE Launcher is displayed.
The menu is displayed.
2Tap [Beam...] from [CLIE Launcher].
The Beam screen is displayed.
3Tap V next to [Beam Frorm:] and select [Handheld].
Select [Handheld] when the application you want to send is saved on your 
CLIÉ handheld or   (card) when it is saved on [/Palm/Launcher] 
directory on “Memory Stick” media.
4Tap an application you want to send, on the Beam screen.
Some applications are protected from copying and cannot be beamed.
Applications marked with   cannot be copied.
5Tap [Beam].
A message will be displayed when the beaming is complete.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Beaming154
Beaming between your CLIÉ handheld and another Palm OS® PDA
Receiving beamed information
1Turn on your CLIÉ handheld and point the IR port of your 
CLIÉ handheld directly to the IR port of another Palm OS 
PDA device. 
The Beam screen is displayed and beaming of data or applications starts.
2Select the category where you want to save the received 
data or applications. 
Data or applications received by beaming are saved in the Unfiled 
category.
You can also create a new category to save the data or applications, or save 
it in the Unfiled category.
3Tap [Yes].
The data or applications are saved.
Note
When [Beam Receive:] in the Preferences screen for [General] is set to [Off], you 
cannot receive data or applications using the beaming feature. Prior to beaming data or 
applications, set [Beam Receive:] to [On]. 
						

							Using the Calculator 
and finding records
This chapter explains how to use the calculator and how to 
efficiently search for records.
Using the Calculator (Calc) . . . . . . . . . . . . . .   156
Finding records . . . . . . . . . . . . . . . . . . . . . .   159 
						

							Using the Calculator and finding records156
Using the Calculator (Calc)
Making Calculations
You can perform basic calculations with Calculator. Moreover, you can save 
values in the calculator memory and recall them from the memory.
1Rotate the Jog Dial™ navigator to select   (Calc) on the 
CLIE Launcher, and press the Jog Dial™ navigator.
Calculator starts.
Tip
You can also tap   (Calc) to start Calculator.
2Perform calculations.
To use Calculator, tap the numbers or symbols on the screen with the 
stylus. 
						

							Using the Calculator and finding records157
Using the Calculator (Calc)
The functions of the Calculator buttons
Calculator has several buttons to help you perform calculations.
CEClears the last number you entered. 
Use this button if you make a mistake while entering 
numbers. This button enables you to re-enter the number 
without starting the calculation again.
CClears the entire calculation and enables you to start a 
new calculation.
+/–Toggles the current number between positive and 
negative. If you want to enter a negative number, enter 
the number and then tap this button.
M+Adds the current number to the total value in the memory. 
Each number you enter with this button is added to the 
total value stored in the Calculator memory. The number 
to be added can be either a calculated value or the number 
you entered by pressing the number buttons. 
Pressing this button has no effect on the current 
calculation (or series of calculations); it merely places the 
value to the memory.
MRRecalls the total value stored in the Calculator memory 
and inserts it in the current calculation.
MCClears any value that is stored in the Calculator memory.
Calculates the square root of the entered number. 
Tap the button after entering the number. 
						

							Using the Calculator and finding records158
Using the Calculator (Calc)
Using the Calculator menus
Edit menus
Options menus
[Copy], [Paste]Copies values from Calculator and pastes them into 
another application. You can also paste numeric values 
you copied from another application, such as Memo 
Pad, into Calculator.
[Recent Calculations]You can review the last series of calculations.
(If you quit the application, the content of the calculation 
is cleared.)
[About Calculator]Shows the version information for Calculator. 
						

							Using the Calculator and finding records159
Finding records
Using the Find option
You can find records, such as Date Book, Address Book, To Do List, or Memo 
Pad data on your CLIÉ handheld, by entering the whole word or the first few 
letters. The search results are displayed by application. This feature helps if you 
do not remember which application you used to create the record you are 
searching for.
Note
The Find option is not compatible with some application data.
1Tap  (Find).
The Find dialog box is displayed.
2Enter the text you want to find.
You can enter letters, symbols, or numbers.
3Tap [OK].
The Find option starts to search and displays the list of search results.
Comments attached to data can also be searched for.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Using the Calculator and finding records160
Finding records
4Tap the data you want to view in the list of search results.
The application associated with the data automatically starts and opens the 
data.
To stop searching
Tap [Stop] and [Exit].
To resume the search, tap [Find More].
Note
The Find option is not case sensitive; searching for “sony” also finds “Sony”.
Tip
If you select text in an application prior to tapping   (Find), the text is automatically 
placed in the Find dialog box.