Sony Clie Peg Tj35 Handheld Instructions Manual

							111
Performing the HotSync® operation via a modem
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Preparing your computer
To perform the HotSync® operation via a modem, you need to follow the steps 
below to set your computer to receive a call from your CLIÉ handheld.
1Check the following items.
 The modem is connected to your computer and both the modem and 
computer are turned on.
 No communication applications, such as fax or telephone software, are 
running on the COM port.
 The computer is disconnected from the Internet.
2Click   (HotSync) in the Windows task tray (Notification 
area) at the bottom right of the computer window and select 
[Modem] from the shortcut menu.
3Click   (HotSync) in the Windows task tray (Notification 
area) at the bottom right of the computer window once again 
and select [Setup...] from the shortcut menu.
The Setup window is displayed.
4Click [Modem].
Continued on next page
• • • • • • • • • • • • • • • 
						

							112
Performing the HotSync® operation via a modem
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
5Adjust the following settings as needed.
Serial port: Specifies the port for the modem. If you are not sure of the 
port settings, check [Modem Properties] ([Phone and Modem Options] 
for Windows 2000 Professional/XP) from [Control Panel].
Speed: Determines the speed at which files/data are transferred. Try 
the rate, [As Fast As Possible] first, and adjust downward if you have 
any problems.
Modem: Specifies the modem type or manufacturer. If you are not sure 
of your modem type or if you cannot find your modem type in the list, 
select [Hayes Basic].
Setup string: Identifies the setup string for your modem 
automatically if you specify the modem type or manufacturer. If it does 
not work properly, refer to the manual of your modem.
6Click [OK].
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the modem HotSync® 
operation.
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap [Modem].
Continued on next page
• • • • • • • • • • • • • • • 
						

							113
Performing the HotSync® operation via a modem
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
3Tap [Enter phone #] beneath the modem name.
The Phone Setup screen is displayed.
4Adjust the following settings as needed:
1Enter the telephone number used to access the modem connected to 
your computer.
2Enter a dial prefix (such as “9”) to access an outside line, and tap the 
check box next to [Dial prefix:] as needed. You can also enter a comma 
in the field to introduce a pause in the dialing sequence. Each comma 
equals a two second pause.
3If the phone line you are using for your CLIÉ handheld has Call 
Waiting, select the check box next to [Disable call waiting:] to avoid 
an interruption during the modem HotSync
® operation.
4If you want to use a calling card to place the call, select the check box 
next to [Use calling card:] and enter the calling card number.
5Tap [OK].
The HotSync screen is displayed again.
Continued on next page
• • • • • • • • • • • • • • • 
						

							114
Performing the HotSync® operation via a modem
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Selecting the conduits for a modem HotSync® operation
You can specify files/data to be synchronized to shorten the time required to 
synchronize files/data with a modem.
bFor details, refer to “Customizing HotSync® application settings (Conduit)” 
on page 103.
Note
If your CLIÉ handheld settings do not match those made in the Change HotSync 
Action window, the operation complies with the CLIÉ handheld’s configurations.
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap  (Menu).
The menu is displayed.
3Tap [Conduit Setup...] from [Options].
The Conduit Setup screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • 
						

							115
Performing the HotSync® operation via a modem
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
4Tap the check boxes to deselect the files/data that you do 
not want to synchronize during the modem HotSync® 
operation.
By the default setting, all files/data are selected to be synchronized.
The data of applications that do not have a database (such as games) 
cannot be synchronized.
5Tap [OK].
Performing the HotSync® operation via a modem
You can perform the modem HotSync® operation when you have prepared 
your computer settings, CLIÉ handheld settings, and Conduit Setup. 
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap  (HotSync).
The HotSync® operation starts.
A message will be displayed when the HotSync® operation is complete. 
						

							116Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Performing the HotSync® operation via a 
network
You can perform the HotSync® operation via a network between your CLIÉ 
handheld and the computer in the LAN of your office, depending on the 
network environment of your office. For details, contact the administrator of 
the remote access server.
Prior to performing the HotSync® operation via a network
Check the following items:
 Both your company’s network system and its remote access server support 
TCP/IP.
 You have a remote access account.
Preparing your computer
1Click   in the Windows task tray (Notification area) at the 
bottom right of the computer window and select [Network] 
from the shortcut menu.
2Click   in the Windows task tray (Notification area) at the 
bottom right of the computer window once again and select 
[Setup...] from the shortcut menu.
The Setup window is displayed.
3Click [Network].
4Click the check box next to the user name for the HotSync 
operation.
Click [TCP/IP Settings...] and assign a subnet mask as needed. For details 
on a subnet mask address, refer to the manual of your operating system or 
contact the system administrator.
5Click [OK].
To operate HotSync® operations via a network, you must have network 
administrator skills.
Continued on next page
• • • • • • • • • • • • • • • 
						

							117
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Connect a USB cable to your CLIÉ handheld and press   
(the HotSync button).
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via a network, your CLIÉ 
handheld identifies the computer based on the transferred information.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via a network.
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap [Modem].
3Tap  (Menu).
The menu is displayed.
4Tap [Modem Sync Prefs...] from [Options].
The Modem Sync Preferences screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • 
						

							118
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
5Tap [Network].
6Tap [OK].
The HotSync screen is displayed.
7Tap [Select Service] beneath the icon.
The Preferences screen for [Network] is displayed.
8Tap [V Service:] and select [Unix] or [Windows RAS] from 
the drop-down list.
b
For details, refer to “Setting the Network preferences for your provider and dial-
up server” on page 80 and contact the administrator of the remote access server.
9Tap [Done].
10Tap [Enter phone #].
The Phone Setup screen is displayed.
11Adjust the settings on the screen as needed.
12Tap [OK]. 
The HotSync screen is displayed.
13Follow “Performing the HotSync® operation via a modem” on 
page 110 to select files/data to be synchronized.
Continued on next page
• • • • • • • • • • • • • • • 
						

							119
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Performing the HotSync® operation via a network
You can perform the HotSync® operation via a network when you have 
prepared your computer settings, CLIÉ handheld settings, and Conduit Setup. 
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap  (HotSync).
The HotSync® operation starts.
A message will be displayed when the HotSync® operation is complete. 
						

							120Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Performing the HotSync® operation via LAN 
(LANSync)
You can perform the HotSync® operation via LAN between your computer and 
another computer connected to your CLIÉ handheld.
Prior to performing a LANSync operation
Check the following items:
Palm™ Desktop for CLIÉ is installed in both computers connected by the 
LAN.
 Your CLIÉ handheld is placed in the charger cradle connected to the 
HotSync cable correctly and the charger cradle is connected to the computer 
properly.
Preparing your computer
1Click   (HotSync) in the Windows task tray (Notification 
area) at the bottom right of the computer window, and select 
[Network] from the shortcut menu.
2Click   (HotSync) in the Windows task tray (Notification 
area) at the bottom right of the computer window once again, 
and select [Setup...] from the shortcut menu.
The Setup window is displayed.
3Click [Network].
4Click the check box next to the user name for the HotSync 
operation.
5Click [OK].
To operate LANSync, you must have network manager skills. Consult a 
network manager prior to setting LANSync.
LANSync via LAN
LAN
Your computer
Continued on next page
• • • • • • • • • • • • • • •