Sony Clie Peg Nx80v Instructions Manual

							Beaming151
Beaming between your CLIÉ handheld and 
another Palm OS
® PDA
What you can do with beaming
Your CLIÉ handheld is equipped with an IR (infrared) port that enables you to 
exchange data or applications with another Palm OS® PDA device that has an 
IR port. The IR port is located at the top of your CLIÉ handheld, behind the 
small dark shield.
You can beam the following information between your CLIÉ handheld and 
another Palm OS
® PDA device that has an IR port:
 The data of Address Book, Date Book, To Do List, or Memo Pad.
 All data in the category currently displayed in Address Book, To Do List, 
or Memo Pad.
 Address Book data that you designate as your business card.
 Add-on applications installed in the memory.
Note
Some applications are protected from copying and cannot be beamed. Applications 
marked with the   icon cannot be copied.
IR Port
(Location of the IR port may 
vary depending on your model.) 
						

							Beaming152
Beaming between your CLIÉ handheld and another Palm OS® PDA
Beaming information
You can beam the data on your CLIÉ handheld to another Palm OS PDA 
device that has an IR port.
1Select the data, category, or business card you want to 
beam.
2Tap the Menu   icon.
The menu is displayed.
3Tap one of the following:
 The Beam command for an individual record
 In Address only: Beam Business Card
 Beam Category
4When the Beam dialog box is displayed, point the IR port of 
your CLIÉ handheld directly to the IR port of another Palm 
OS PDA device.
The Beam dialog box shows that the transfer is complete.
Tip
For best performance of the data exchange, keep 4 to 8 inches (approximately 10 to 
20 centimeters) between your CLIÉ handheld and the other Palm OS PDA device. 
Do not place any obstacle between the devices. The optimum distance for beaming 
may vary depending on devices.
(Location of the IR port may 
vary depending on your model.) 
						

							Beaming153
Beaming between your CLIÉ handheld and another Palm OS® PDA
Sending applications via beaming
1Tap the Menu   icon on the Application Launcher screen.
The menu is displayed.
2Tap Beam from the CLIE Launcher menu.
The Beam screen is displayed.
3Tap the arrow V next to Beam From and select Handheld.
Select Handheld when the application you want to send is saved on your 
CLIÉ handheld or   card when it is saved on the /Palm/Launcher 
folder on the storage media.
4Tap an application you want to send, on the Beam screen.
Some applications are protected from copying and cannot be beamed.
Applications marked with the   icon cannot be copied.
5Tap Beam.
A message will be displayed when the beaming is complete. 
						

							Beaming154
Beaming between your CLIÉ handheld and another Palm OS® PDA
Receiving beamed information
1Turn on your CLIÉ handheld and point the IR port of your 
CLIÉ handheld directly to the IR port of another Palm OS 
PDA device. 
The Beam dialog box is displayed and beaming of data or applications 
starts.
2Select the category where you want to save the received 
data or applications. 
Data or applications received by beaming are saved in the Unfiled 
category.
You can also create a new category to save the data or applications to, or 
save it in the Unfiled category.
3Tap Yes.
The data or applications are saved.
Note
When Beam Receive in the General Preferences screen is set to Off, you cannot 
receive data or applications using the beaming feature. Prior to beaming data or 
applications, set Beam Receive to On. 
						

							Using the Bluetooth™ 
function
(for Bluetooth™ built-in models only)
This chapter explains how to exchange information such as 
applications or data with another Bluetooth™ compatible 
device using the Bluetooth™ function.
Exchanging files/data using the Bluetooth™ function  . . . . . . . . . . . . . . . . . . . . . . . . . 156
What you can do with the Bluetooth™ 
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  156
Sending files/data, such as image files or Date 
Book data, to another CLIÉ handheld with 
the built-in Bluetooth™ function or Bluetooth™ 
Module (optional)  . . . . . . . . . . . . . . . . . . . . .  156
Performing the wireless HotSync
® operation 
with a computer. . . . . . . . . . . . . . . . . . . . . . .  158
Connecting to the Internet by communicating with  a Bluetooth™ compatible mobile phone  . .   159 
						

							Using the Bluetooth™ function156
Exchanging files/data using the Bluetooth™ 
function
What you can do with the Bluetooth™ function
The Bluetooth™ function enables wireless communication within a range of 
33 feet (approximately 10 meters). You can use the function to exchange files/
data between your CLIÉ handheld and other Bluetooth™ compliant devices.
Sending files/data, such as image files or Date Book data, to 
another CLIÉ handheld with the built-in Bluetooth™ function or 
Bluetooth™ Module (optional)
1Select a file/data.
1Sending an image file, movie file, voice memo, or 
handwritten memo
Start CLIE Viewer, tap the Menu   icon to display the menu, select 
Send… from the Data menu, and tap a file/data you want to send.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							Using the Bluetooth™ function157
Exchanging files/data using the Bluetooth™ function
Tip
Sending image files
You can select a method of sending files/data in the Send With dialog box.
(The dialog box below may not be displayed depending on your operating 
environment.)
2Sending Date Book data or Address Book data
Tap the schedule data or address data you want to send, tap the Menu 
 icon to display the menu, and then select Send Event (for Date 
Book) or Send Address (for Address Book) from the menu.
2Send a file/data.
After the Bluetooth Discovery dialog box is displayed, the list of 
Bluetooth™ compatible CLIÉ handhelds within range of the 
communication area is displayed on the Discovery Results dialog box. 
Tap to select the CLIÉ handheld to which you want to send data.
The Bluetooth Progress dialog box will be displayed on both CLIÉ 
handhelds. Follow the on-screen instructions.
Tip
If you have renamed a target Bluetooth™ compatible device registered on your 
CLIÉ handheld, the device may be listed in the previous name when you detect 
target Bluetooth™ compatible devices.
In this case, follow the procedure below.
1Tap the Menu   icon on the Bluetooth Preferences screen.
2Tap Disable device name cache from the Options menu.
3Detect target Bluetooth™ compatible devices.
Note
To view or edit received files/data, applications supporting each file/data must be 
installed on the CLIÉ handheld. 
						

							Using the Bluetooth™ function158
Exchanging files/data using the Bluetooth™ function
Performing the wireless HotSync® operation with a computer
If you are using a Bluetooth™ compatible computer, you can perform the 
wireless HotSync® operation between your CLIÉ handheld and your computer.
bFor details, refer to “Performing the HotSync® operation using the Bluetooth™ 
function (for Bluetooth™ built-in models only)” on page 110. 
						

							Using the Bluetooth™ function159
Connecting to the Internet by communicating 
with a Bluetooth™ compatible mobile phone
You can enjoy browsing various websites or send/receive e-mails using your 
CLIÉ handheld, via a Bluetooth™ compatible mobile phone.
Connecting
When you access the Internet via a Bluetooth™ compatible mobile phone, you 
need to follow this procedure to pair the device with your CLIÉ handheld.
1Setting the connection method/Performing pairing
2Setting up the network connection
Tip
What is pairing?
To enable Bluetooth™ communication between this Bluetooth™ Module and 
another Bluetooth™ compatible device, the device must be identified. This process 
is referred to as pairing which is necessary to prevent access from unauthorized 
Bluetooth™ compatible devices. A common Passkey is used to pair the device with 
this Bluetooth™ Module.
1Setting the connection method/Performing pairing
You need to set the communication method and perform pairing for 
Bluetooth™ communications.
1Rotate the Jog Dial™ navigator to select the Prefs icon on 
the Application Launcher screen and press the Jog Dial™ 
navigator.
The Preferences screen is displayed.
Tip
You can also tap the Prefs icon to display the Preferences screen.
2Tap the arrow V at the top right of the screen, and select 
Connection.
The list of Available Connections appears.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							Using the Bluetooth™ function160
Connecting to the Internet by communicating with a Bluetooth™ compatible 
mobile phone
3Tap New.
The Edit Connection screen appears.
1Name: Enter any connection name you like.
Custom is displayed by default.
2Connect to: Tap V and select Modem. 
3Via: Tap V and select Bluetooth.
4Dialing: Tap V and select the type of telephone circuit you use. The 
most common selection is TouchTone™.
5Volume: Tap V and select the speaker volume to browse the Internet.
4Tap Tap to discover.
Bluetooth™ compatible device discovery begins in the vicinity of your 
CLIÉ handheld.
When the discovery is complete, Bluetooth™ compatible devices found 
around your CLIÉ handheld are displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • •