Sony Camera Cyber Shot Dsc Tx200v Instruction Manual

GB
11
GB
Charging the battery pack
1Connect the camera to the AC Adaptor (supplied), 
using the micro USB cable (supplied).
2Connect the AC Adaptor to the wall outlet (wall socket).The Power/Charge lamp lights orange, and charging starts.
 Turn off the camera while charging the battery.
 You can charge the battery pack even when it is partially charged.
 When the Power/Charge lamp flashes and charging is not finished, 
remove and re-insert the battery pack.
Power cord 
(Mains lead) For customers in the...

GB
12
 If the Power/Charge lamp on the camera flashes when the AC Adaptor is 
connected to the wall outlet (wall socket), this indicates that charging is 
temporarily stopped because the temperature is outside the recommended range. 
When the temperature gets back within the appropriate range, the charging 
resumes. We recommend charging the battery pack in an ambient temperature of 
between 10°C to 30°C (50ºF to 86ºF).
 The battery pack may not be effectively charged if the terminal section of the...

GB
13
GB
xCharging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using 
a micro USB cable.
 Note the following points when charging via a computer:
– If the camera is connected to a laptop computer that is not connected to a power 
source, the laptop battery level decreases. Do not charge for an extended period 
of time.
– Do not turn on/off or restart the computer, or wake the computer to resume from 
sleep mode when a USB connection has been...

GB
14
xBattery life and number of images that can be 
recorded and played back
 The above number of images applies when the battery pack is fully charged. The 
number of images may decrease depending on the conditions of use.
 The number of images that can be recorded is for shooting under the following 
conditions:
– Using Sony microSD memory card (Class 4 or faster) (sold separately)
– The battery pack is used at an ambient temperature of 25°C (77°F).
– [GPS setting] is set to [Off] (DSC-TX200V only)....

GB
15
GB
xSupplying power
The camera can be supplied with power from the wall outlet (wall socket) by 
connecting to the AC Adaptor, using the micro USB cable (supplied).
You can import images to a computer without worrying about draining the 
battery pack by connecting the camera to a computer using the micro USB 
cable.
In addition, you can use the AC Adaptor AC-UD10 (sold separately) for 
shooting to supply power when shooting.
 Power cannot be supplied when the battery pack is not inserted in the...

GB
16
Inserting a memory card (sold separately)
1Open the cover.
2Insert the memory card (sold separately). With the camera lens facing upward, as illustrated, insert the memory 
card straight in until it clicks into place.
 Pushing down on the microSD memory card (in the direction of the 
battery insertion slot) while inserting it may damage the camera.
 Be careful when removing the microSD memory card, as it may pop out 
quickly.
3Close the cover.
4Check the icon displayed on the upper right screen and...

GB
17
GB
xMemory cards that can be used
 In this manual, products in A are collectively referred to as “Memory Stick Micro” 
media, and products in B are collectively referred to as microSD memory card.
xTo remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
 Never remove the memory card/battery pack when the access lamp (page 9) is lit. 
This may cause damage to data in...

GB
18
Setting the clock
1Press the ON/OFF (Power) button.The camera is turned on. The power lamp lights up green only when the 
camera starts up.
Date & Time setting is displayed when you turn on the camera for the first 
time.
 It may take time for the power to turn on and allow operation.
2Select a desired language.
3Select a desired geographic location by following the 
on-screen instructions, then touch [Next].
4Set [Daylight Savings] or [Summer Time], [Date & Time 
Format] and [Date & Time], then...

GB
19
GB
Shooting still images
Shooting movies
 The sound of the lever operating will be recorded when the zoom function 
operates while shooting a movie.
 Continuous shooting is possible for approximately 29 minutes at one time at the 
camera’s default settings and when the temperature is approximately 25°C (77°F). 
When movie recording is finished, you can restart recording by performing the 
steps above from the beginning. Recording may stop to protect the camera 
depending on the ambient...

GB
20
xSelecting next/previous image
Touch   (Next)/  (Previous) on the screen.
 To play back movies, touch   (Playback) in the center of the screen.
 To zoom in, slide the W/T (Zoom) lever to T side.
xDeleting an image
Touch  (Delete) t [This Image].
xReturning to shooting images
Touch   on the screen.
 You can also return to shooting mode by pressing the shutter button halfway 
down.
Viewing images
1Touch  (Playback). When images on a memory card recorded with other cameras are played 
back on this...