Sony Camera Alpha 6000 Instruction Manual

							
4-532-055-11(1)
ILCE-6000
Interchangeable Lens 
Digital Camera
Instruction Manual
E-mount 
						

							
GB
2
This camera is equipped with a built-in instruction guide.
In-Camera Guide
The camera displays explanations for MENU items and the setting values.
1Press the MENU button or the Fn (Function) button.
2 Select the desired item, then press the C2 button.
Shooting Tip
The camera displays shooting tips for the shooting mode selected.
1 Press the C2 button in shooting mode.
2 Select the desired shooting tip, then press  z on the control wheel.
The shooting tip is displayed.
• You can scroll the screen using  v/V  and change shooting tips using  b/B .
English
Learning more about the camera (“Help Guide”)
“Help Guide” is an on-line manual. Refer to it for in-depth 
instructions on the many functions of the camera.
1 Access the Sony support page.
http://www.sony.net/SonyInfo/Support/
2 Select your country or region.
3 Search for the model name of your camera on the support 
page.
 Check the model name on the bottom of your camera.
Viewing the Guide
C2
MENU 
						

							
GB
3
Owner’s RecordThe model and serial numbers are located on the bottom. Record the serial number in the 
space provided below. Refer to these numbers whenever you call your Sony dealer 
regarding this product.
Model No. ILCE-6000
Serial No.  _____________________________
Model No. AC-UB10C/AC-UB10D
Serial No.  _____________________________
To reduce fire or shock hazard, do not expose the unit to rain or 
moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, CAREFULLY FOLLOW THESE 
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the 
proper configuration for the power outlet.
[Battery packIf the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical 
burns. Observe the following cautions.
 Do not disassemble.
 Do not crush and do not expose the battery pack to any shock or force such as 
hammering, dropping or stepping on it.
 Do not short circuit and do not allow metal objects to come into contact with the battery  terminals.
 Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a  car parked in the sun.
 Do not incinerate or dispose of in fire.
 Do not handle damaged or leaking lithium ion batteries.
 Be sure to charge the battery pack using a genuine Sony battery charger or a device that  can charge the battery pack.
WARNING
CAUTION 
						

							
GB
4
 Keep the battery pack out of the reach of small children.
 Keep the battery pack dry.
 Replace only with the same or equivalent type recommended by Sony.
 Dispose of used battery packs promptly as described in the instructions.
[AC AdaptorUse the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC 
Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while 
using the apparatus.
The power cord (mains lead), if supplied, is designed specifically for use with this camera 
only, and should not be used with other electrical equipment.
[RECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used 
rechargeable batteries to the collection and recycling location nearest 
you.
For more information regarding recycling of rechargeable batteries, call 
toll free 
1-800-822-8837, or visit http://www.call2recycle.org/
Caution:  Do not handle damaged or leaking Lithium-Ion batteries.
[Battery pack and lens (If lens supplied)This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
CAN ICES-3 B/NMB-3 B
This equipment complies with FCC/IC radiation exposure limits set forth for an 
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines 
in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. 
This equipment has very low levels of RF energy that are deemed to comply without 
testing of specific absorption ratio (SAR).
For Customers in the U.S.A. and Canada 
						

							
GB
5
If you have any questions about this product, you may call:Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
[ Regulatory Information
This equipment must not be co-located or operated in conjunction with any other antenna 
or transmitter.
[CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual 
could void your authority to operate this equipment.
[Note:This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the 
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For Customers in the U.S.A.
Declaration of ConformityTrade Name: SONY
Model No.: ILCE-6000
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation. 
						

							
GB
6
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including interference that 
may cause undesired operation of the device.
[Notice for the customers in the countries applying EU DirectivesManufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan
For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 
Stuttgart, Germany
Hereby, Sony Corporation, declares that this equipment is in compliance with the essential 
requirements and other relevant provisions of Directive 1999/5/EC. For details, please 
access the following URL:
http://www.compliance.sony.de/
[NoticeIf static electricity or electromagnetism causes data transfer to discontinue midway (fail), 
restart the application or disconnect and connect the communication cable (USB, etc.) 
again.
This product has been tested and found compliant with the limits set out in the EMC 
regulation for using connection cables shorter than 3 meters (9.8 feet).
The electromagnetic fields at the specific frequencies may influence the picture and sound 
of this unit.
For Customers in Canada
For Customers in Europe 
						

							
GB
7
[Disposal of waste batteries and electrical and electronic 
equipment (applicable in the European Union and other 
European countries with separate collection systems)
This symbol on the product, the battery or on the packaging indicates that 
the product and the battery shall not be treated as household waste. On 
certain batteries this symbol might be used in combination with a 
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are 
added if the battery contains more than 0.0005% mercury or 0.004% lead. 
By ensuring these products and batteries are disposed of correctly, you 
will help prevent potentially negative consequences for the environment and human health 
which could otherwise be caused by inappropriate waste handling. The recycling of the 
materials will help to conserve natural resources. 
In case of products that for safety, performance or data integrity reasons require a 
permanent connection with an incorporated battery, this battery should be replaced by 
qualified service staff only. To ensure that the battery and the electrical and electronic 
equipment will be treated properly, hand over these products at end-of-life to the 
applicable collection point for the recycling of electrical and electronic equipment. For all 
other batteries, please view the section on how to remove the battery from the product 
safely. Hand the battery over to the applicable collection point for the recycling of waste 
batteries. For more detailed information about recycling of this product or battery, please 
contact your local Civic Office, your household waste disposal service or the shop where 
you purchased the product or battery.
[ NoteSome certification marks for standards supported by the camera can be confirmed on the 
screen of the camera.
Select MENU  t  (Setup) 6  t [Certification Logo].
If display is not possible due to problems such as camera failure, contact your Sony dealer 
or local authorized Sony service facility.
For Customers in Singapore
For customers who purchased their camera from a store 
in Japan that caters to tourists 
						

							
GB
8
Table of contents
– Checking the supplied items
– Identifying parts
– Inserting the battery pack
– Charging the battery pack
– Inserting a memory card (sold separately)
– Attaching/removing the lens
– Setting the clock
– Shooting still images/movies
– Viewing images
– Introduction of other functions
– Features of PlayMemories Home™
– Adding functions to the camera
– Number of still images and recordable time of movies
– Notes on using the camera
– Specifications
Preparing the cameraStep 1 P. 9
Basic operationStep 2 P. 23
Playback functionStep 3 P. 24
Recording functionStep 4 P. 25
Importing images to the computer P. 33
Adding functions to the camera P. 35
Others P. 36
This manual covers several models supplied with different lenses.
The model name varies depending on the s upplied lens. The available model varies 
depending on the countries/regions.
Model nameLens
ILCE-6000 Not supplied
ILCE-6000L E16 – 50 mm
ILCE-6000Y E55 – 210 mm and E16 – 50 mm 
						

							
GB
9
First check the model name of your camera (page 8). The accessories supplied 
differ depending on the model.
The number in parentheses indicates the quantity.
xSupplied with all models
 Camera (1)
 Power cord (mains lead) (1)* (not supplied in the U.S.A. and Canada)
* Multiple power cords may be  supplied with your camera. Use the 
appropriate one th at matches your 
country/region.
 Rechargeable battery pack 
NP-FW50 (1)
 Micro USB cable (1)
 AC adaptor AC-UB10C/UB10D  (1)
 Shoulder strap (1)  Eyepiece cup (1)
 Instruction Manual (this manual) 
(1)
 Wi-Fi Connection/One-touch  (NFC) Guide (1)
This guide explains the functions 
that require a Wi-Fi connection.xILCE-6000
 Body cap (1) (attached to the 
camera)
xILCE-6000L
 E16 – 50 mm zoom lens (1) (attached to the camera)/Front lens 
cap (1) (attached to the lens)
xILCE-6000Y
 E16 – 50 mm zoom lens (1) (attached to the camera)/Front lens 
cap (1) (attached to the lens)
 E55 – 210 mm zoom lens (1)/Front  lens cap (1)/Rear lens cap (1)/Lens 
hood (1)
Checking the supplied items 
						

							
GB
10
When the lens is removed
AShutter button
B C1 (Custom 1) button
C Remote sensor
D ON/OFF (Power) switch
E Self-timer lamp/AF illuminator
F Lens release button
G Microphone
1)
HLens
I Mount
J Image sensor
2)
KLens contacts2)
1)Do not cover this part during movie 
recording.
2)Do not touch this part directly.
Identifying parts