Sony Bdv E970w Operating Instructions

Other Operations
51GB
Be quiet during the measurement.
Note Before [Auto Calibration], make sure that the 
surround amplifier turns on and you install the 
surround amplifier in the appropriate location. If 
you install the surround amplifier in an improper 
location, such as another room, proper 
measurement will not be obtained.
 When you use the Wireless Surround Speaker 
Kit (WAHT-SBP2, optional) for the surround 
back speakers (page 15), install the speakers in 
appropriate location and turn the...

52GB
[Subwoofer]
[Yes]
x[Distance]
When you move the speakers, be sure to set the 
parameters of the distance (A) from the 
listening position to the speakers.
You can set the parameters from 0.0 to 7.0 
meters.
The speakers in the illustration correspond to the 
following:
1Center speaker
2Front left speaker (L)
3Front right speaker (R)
4Subwoofer
5Surround left speaker (L)
6Surround right speaker (R)
7Surround back left speaker (L) (optional)
8Surround back right speaker (R) (optional)
[Front...

Other Operations
53GB
Note The test tone signals are not output from the HDMI 
OUT jack.
Tip To adjust the volume of all the speakers at one time, 
press 2 +/–.
Using the Sleep Timer
You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
The time can be preset in intervals of 10 
minutes.
Press SLEEP.
Each time you press SLEEP, the minutes display 
(the remaining time) changes by 10 minutes.
When you set the sleep timer, “SLEEP” flashes 
in the front panel...

54GB
Saving Power in Standby 
Mode
Check that the following settings are made:
– [Control for HDMI] in [HDMI Settings] is set 
to [Off] (page 48).
– [Standby] in [S-AIR Settings] is set to [Off] 
(page 45).
– [Quick Start Mode] is set to [Off] (page 59).
 

Settings and Adjustments
55GB
Using the Setup Display
You can make various adjustments of items such 
as picture and sound.
Select   (Setup) on the home menu when you 
need to change the settings of the system.
The default settings are underlined.
Note Playback settings stored in the disc take priority over 
the Setup Display settings and not all the functions 
described may work.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select the setup category...

56GB
[Screen Settings]
x[3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all contents in 2D.
x[TV Screen Size Setting for 3D]
Sets the screen size of your 3D compatible TV.
x[TV Type]
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide-mode function.
[4:3]: Select this when connecting to a 4:3 
screen TV without a wide-mode function.
x[Screen Format]
[Original]: Select this when connecting to a TV 
with a wide-mode function. Displays a 4:3 
screen...

Settings and Adjustments
57GB
[Frame]: The picture, including subjects that do 
not move dynamically, is output in high 
resolution.
[Audio Settings]
x[BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the 
interactive audio and secondary audio to the 
primary audio.
[Off]: Outputs the primary audio only. Select 
this when outputting HD audio signals to an AV 
receiver.
x[Audio DRC]
You can compress the dynamic range of the 
sound track.
[Auto]
: Performs playback at the dynamic range...

58GB
[BD/DVD Viewing 
Settings]
You can make detailed settings for BD/DVD 
playback.
x[BD/DVD Menu]
You can select the default menu language for 
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the 
display for entering the language code appears. 
Enter the code for your language by referring to 
“Language Code List” (page 76).
x[Audio]
You can select the default track language for 
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given 
priority in the disc is selected....

Settings and Adjustments
59GB
[Music Settings]
You can make detailed settings for Super Audio 
CD playback.
x[Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD 
layer.
[CD]: Plays the CD layer.
x[Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]
: Plays the multi-channel area.
[System Settings]
You can make the system-related settings.
x[OSD]
You can select your language for the system on-
screen displays.
x[S-AIR Settings]
You can set up the S-AIR...

60GB
x[Auto Display]
[On]: Automatically displays information on the 
screen when changing the viewing titles, picture 
modes, audio signals, etc.
[Off]: Displays information only when you 
press
 DISPLAY.
x[Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x[Software Update Notification]
[On]: Sets the system to inform you of newer 
software version information (page 55).
[Off]: Off.
x[Gracenote Settings]
[Auto]: Automatically downloads disc 
information when you stop playback of the...