Sony Bdv E370 Operating Instructions

External Audio Device
41GB
Using an S-AIR Product
When you purchase the S-AIR product, you 
need to perform the following settings to 
activate wireless transmission.
About S-AIR products
There are two types of S-AIR product.
 S-AIR main unit (this unit): This is for 
transmitting sound. You can use up to three 
S-AIR main units. (The number of usable 
S-AIR main units depends on the use 
environment.)
 S-AIR sub unit: This is for receiving sound.
–Surround amplifier (optional): You 
can enjoy surround...

42GB
3Make sure to use the same screws to 
secure the wireless transmitter.
Note Do not use other screws to fasten the wireless 
transmitter.
To insert the wireless 
transceiver into the S-AIR sub 
unit
For details on installing the wireless transceiver 
into the S-AIR sub unit, such as a surround 
amplifier or S-AIR receiver, see the operating 
instructions of the S-AIR sub unit.
Tip When you change the S-AIR configuration, Sony 
recommends that you perform [Auto Calibration]. 
For details, see...

External Audio Device
43GB
You can enjoy the system’s sound in another 
room by using the S-AIR receiver.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select [System Settings], 
then press  .
4Press X/x to select [S-AIR Settings], 
then press  .
The [S-AIR Settings] display appears.
5Press X/x to select [Mode], then press 
.
6Press X/x to select the desired setting.
: The S-AIR receiver outputs 
sound according to functions set on the 
unit....

44GB
When using S-AIR products, neighbors may 
also receive your system’s sound if IDs are the 
same, or you may receive sound from neighbors. 
To prevent this, you can identify the unit with a 
specific S-AIR sub unit by performing the 
pairing operation.
When you perform pairing, wireless 
transmission is activated between the paired 
main unit and S-AIR sub unit only.
1Place the S-AIR sub unit that you want 
to pair near the unit.
2Match the IDs of the unit and the S-AIR 
sub unit.
 To set the ID of...

External Audio Device
45GB
: Normally select this. The system 
changes [RF Change] to [On] or [Off] 
automatically.
 [On]: The system transmits sound by 
searching for the better channel for 
transmitting.
 [Off]: The system transmits sound by 
fixing the channel for transmitting.
7Press .
The setting is made.
8When you set [RF Change] to [Off], 
select the ID so that wireless 
transmission is most stable (page 42).
Note In most cases, you will not need to change this 
setting.
– If [RF Change] is set to...

46GB
Using the Control for 
HDMI Function for 
“BRAVIA” Sync
This function is available on TVs with the 
“BRAVIA” Sync function.
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable, operation is simplified as 
below:
– System Power Off (page 47)
– One-Touch Play (page 47)
– Theatre Mode (page 47)
– System Audio Control (page 47)
– Volume Limit (page 47)
– Audio Return Channel (page 47)
– Remote Easy Control (page 48)
– Language Follow (page 48)...

Other Operations
47GB
6Press X/x to select the setting, then 
press .
: On.
 [Off]: Off.
(System Power Off)
When you turn the TV off by using the POWER 
button on the TV’s remote or TV "/1 on the 
system’s remote, the system turns off 
automatically.
Note This function depends on the settings of your TV. For 
details, refer to the operating instructions of the TV.
(One-Touch Play)
Press ONE-TOUCH PLAY.
The system and your TV turn on, your TV’s 
input is set to the HDMI input to which the 
system is...

48GB
compatible with the Audio Return Channel 
function. You can enjoy TV sound via the 
system by using just one HDMI cable. For 
details, see [Audio Return Channel] (page 56).
(Remote Easy Control)
You can control the basic functions of the 
system via the TV remote when the system’s 
video output is displayed on the TV screen. For 
details, refer to the operating instructions of the 
TV.
(Language Follow)
When you change the language for the on-screen 
display of the TV, the system’s on-screen...

Other Operations
49GB
location, such as another room, proper 
measurement will not be obtained.
 When you use the Wireless Surround Speaker 
Kit (WAHT-SBP2, optional) for the surround 
back speakers (page 14), install the speakers in 
appropriate location and turn the surround 
amplifier on. To use the surround back speakers, 
set [Surround Back] in [Speaker Settings] to 
[Yes] (page 49) 
8Confirm the conclusions of [Auto 
Calibration].
The speakers connected to the unit are listed 
as [Yes] on the TV...

50GB
The speakers in the illustration correspond to the 
following:
1Center speaker
2Front left speaker (L)
3Front right speaker (R)
4Subwoofer
5Surround left speaker (L)
6Surround right speaker (R)
7Surround back left speaker (L) (optional)
8Surround back right speaker (R) (optional)
[Front Left/Right] 3.0 m: Set the front speaker 
distance.
[Center]* 3.0 m
: Set the center speaker distance.
[Surround Left/Right]* 3.0 m
: Set the surround 
speaker distance.
[Surround Back Left/Right]* 3.0 m
: Set the...