Home > Stiga > Snow Blower > Snow Blower Stiga DUO LINE DUO LINE+ SNOW STORM SNOW BLIZZARD SNOW FLAKE SNOW POWER 8218 2221 70 Instructions Manual

Snow Blower Stiga DUO LINE DUO LINE+ SNOW STORM SNOW BLIZZARD SNOW FLAKE SNOW POWER 8218 2221 70 Instructions Manual

Add to Favourites
    Download as PDF

    Here you can view all the pages of manual Snow Blower Stiga DUO LINE DUO LINE+ SNOW STORM SNOW BLIZZARD SNOW FLAKE SNOW POWER 8218 2221 70 Instructions Manual. The Stiga manuals for Snow Blower are available online for free. You can easily download all the documents as PDF.

    Overview View all the pages Comments

    Page 11

    Page 11 52 ENGLISHEN 3. Turn the adjustment lever and set the deflector to throw the snow in the direction of the wind. 4. Set the gear lever to a suitable position. The gear stick must not be moved if the driving clutch lever is depressed. 5. Press down the auger clutch lever (13 in fig. 7/8) to activate the auger and discharge fan. Watch out for rotating auger. Keep hands, feet, hair and loose clothing away from any moving parts on the machine. 6. Press down the auger clutch lever (12 in fig. 7/8).... 
    52
 ENGLISHEN
3.  Turn the adjustment lever and set the deflector to throw 
the snow in the direction of the wind.
4.  Set the gear lever to a suitable position. 
The gear stick must not be moved if the driving 
clutch lever is depressed.
5.  Press down the auger clutch lever (13 in fig. 7/8) to 
activate the auger and discharge fan.
Watch out for rotating auger. Keep hands, feet, 
hair and loose clothing away from any moving 
parts on the machine.
6.  Press down the auger clutch lever (12 in fig. 7/8)....

    Page 12

    Page 12 53 ENGLISHEN Note: The SNOW MASTER does not have lubricating nipples on the auger. Lubricate by removing the bolts. 7.3 WORM GEAR The worm gear if filled with special lubricant at the factory. Refilling is not normally required. Loosen the plug once a year and check if the worm gear contains lubricant (fig 14). If it is leaking or has been repaired it must be refilled with lubricant. The worm gear holds 92 grams of lubricant at the most. Use Shell Darina 1, Texaco Thermatex EP1, Mobiltem 78,... 
    53
 ENGLISHEN
Note: The SNOW MASTER does not have lubricating 
nipples on the auger. Lubricate by removing the bolts.
7.3 WORM GEAR
The worm gear if filled with special lubricant at the factory. 
Refilling is not normally required.
Loosen the plug once a year and check if the worm gear 
contains lubricant (fig 14).
If it is leaking or has been repaired it must be refilled with 
lubricant. The worm gear holds 92 grams of lubricant at the 
most.
Use Shell Darina 1, Texaco Thermatex EP1, Mobiltem 78,...

    Page 13

    Page 13 54 ENGLISHEN 8.4 ADJUSTING THE BELT GUIDE 1. Remove the spark plug protection. 2. Remove the belt protective cover (1) by loosening the screws (2). See fig. 16. 3. Activate the auger clutch lever (13 in fig 7/8). 4. Check the distance between the belt guide and the belt. The distance should be 3 mm. See fig 17. 5. If adjustment is required, loosen the screw to the belt guide and set the correct distance. 6. Tighten the screw properly. 7. Reassemble the belt protection. 8. Reassemble the... 
    54
 ENGLISHEN
8.4 ADJUSTING THE BELT GUIDE
1.  Remove the spark plug protection.
2.  Remove the belt protective cover (1) by loosening the 
screws (2). See fig. 16.
3.  Activate the auger clutch lever (13 in fig 7/8).
4.  Check the distance between the belt guide and the belt. 
The distance should be 3 mm. See fig 17.
5.  If adjustment is required, loosen the screw to the belt 
guide and set the correct distance.
6.  Tighten the screw properly.
7.  Reassemble the belt protection. 
8.  Reassemble the...

    Page 14

    Page 14 55 ENGLISHEN 8.8 REPLACING THE SHEAR BOLTS The auger is fastened to the shaft by special bolts that are designed to break if something gets stuck in the auger housing. Always use genuine spare parts. Other types of bolts could cause serious damage to the machine. 1. Stop the engine. 2. - Disconnect the starting cable from the spark plug. 3. Ensure all the rotating parts have stopped. 4. Remove the object that has fastened in the auger. 5. Lubricate the auger shaft (see above). 6. Assemble the... 
    55
 ENGLISHEN
8.8 REPLACING THE SHEAR BOLTS 
The auger is fastened to the shaft by special bolts that are 
designed to break if something gets stuck in the auger 
housing.
Always use genuine spare parts. Other types of 
bolts could cause serious damage to the machine.
1.  Stop the engine.
2.  - Disconnect the starting cable from the spark plug.
3.  Ensure all the rotating parts have stopped.
4.  Remove the object that has fastened in the auger.
5.  Lubricate the auger shaft (see above).
6.  Assemble the...

    Page 15

    Page 15 www.stiga.com GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS 
    www.stiga.com
GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS
    Start reading Snow Blower Stiga DUO LINE DUO LINE+ SNOW STORM SNOW BLIZZARD SNOW FLAKE SNOW POWER 8218 2221 70 Instructions Manual

    Related Manuals for Snow Blower Stiga DUO LINE DUO LINE+ SNOW STORM SNOW BLIZZARD SNOW FLAKE SNOW POWER 8218 2221 70 Instructions Manual

    All Stiga manuals