Smeg Sta6544tc Instruction Manual

							 
User instructions   
 
 
29 
CUTLERY BASKET The basket has removable top grids into which items of cutlery should 
be inserted to keep them properly spaced and allow water to pass 
between them effectively. The top grids and central lid are in the bag of 
accessories. The central lid functions as a lid only.  
The top grids can be detached and used separately. 
The cutlery should be arranged in an orderly manner inside the basket, 
with the handles pointing downwards. Take care during loading to avoid 
injury from the knife blades. The basket is suitable for all types of cutlery, 
except those long enough to interfere with the upper spray arm. Ladles, 
wooden spoons and cooking knives can be placed in the upper basket, 
making sure that the knife blades do not protrude from the basket.   
   
The cutlery basket slides across the dishwasher and can be placed in 
any position to allow optimal use of the space in the bottom basket. 
 
 
 
  
 
						

							 User instructions    
 
30 
UPPER BASKET It is recommended to load the upper basket with small- or medium-sized 
items such as glasses, small plates, tea or coffee cups, shallow bowls 
and light objects made from heat resistant plastic. If the upper basket is 
used in the lowermost position, it can also be loaded with serving dishes, 
provided they are only slightly soiled.  
 
 
 
LOADING THE UPPER BASKET 
 Load plates facing forward; cups, bowls etc. must always be facing 
downwards. The left side of the basket can be loaded with cups and 
glasses on two levels. In the centre section, plates and saucers can be 
loaded vertically into the supports provided.
 
 
Loading examples:  
 
              
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 
User instructions   
 
 
31 
Examples of loading for intensive dirt:  
 
         
       
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 User instructions    
 
32 
Depending on the models, the basket may be equipped with some or all 
of the following accessories: 
-  Supports for cups or long objects (ladles, spoons…), on the left; 
can be tipped to the vertical position when not in use. 
-  Long-stemmed glass holder, on the left; to use, simply lift and 
fix onto the hooks provided. 
-  Cutlery racks, on the right, designed for knives and teaspoons; 
for teaspoons, pull out the sliding support. The racks can be 
tipped to the vertical position when not in use. 
- Fixed or movable racks in the middle. The movable supports 
can be fixed vertical, resting on the bottom of the basket when 
not in use, or set in the intermediate position, as required. 
 
               
               
 
 
 
 
 
 
 
 
 
 
 
 
						

							 
User instructions   
 
 
33 
 
 
 
 
 ADJUSTING THE UPPER BASKET 
The height of the top basket can be adjusted to allow large dishes or 
pans to be placed in the bottom basket. 
The adjustment procedure may be type A or B, depending on the 
dishwasher model purchased. 
  
 
 
 
 
 
 Version A: pull-out with adjustment intwo positions.
•  Pull out both the basket guides. 
•  Remove the stops, first releasing them as shown in the diagram. 
•  Pull out the basket. 
•  Fit the upper or lower pair of wheels into the guide, depending on 
the setting required
; 
•  Return the stops to their original position. 
The left hand and right hand sides of the basket must always be set at 
the same height. 
 
  
 
 
 
 
 
 
 
 
Version B:with adjustment inthree positions on both sides. 
The sides of the basket must always be set at the same height. 
•  Raise the basket by pulling on the top edge (1), to the first or second 
catch depending on the height required. 
•  To lower the basket, first release it by pulling the release lever (2). 
Adjustment is also possible with the basket loaded, but in this case when 
lowering the basket it should be held steady with one hand to avoid 
knocking the dishes. 
  
 
 
 
 
 
 
 
 
 
 
 
						

							 User instructions    
 
34 
5.  Cleaning and maintenance  
 
Before carrying out any work, always unplug the appliance from the 
electrical supply or switch off the all-pole disconnection device. 
 
5.1  General warnings and recommendations   Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regularly 
using a soft cloth moistened with water or with a normal detergent 
suitable for painted surfaces. Clean the door gaskets with a damp 
sponge. Periodically (once or twice a year) it is advisable to clean the 
tank and gaskets, using a soft cloth and water to remove any deposits. 
 CLEANING THE WATER INTAKE FILTER
The water intake filter A located at the outlet of the water supply tap 
needs to be cleaned periodically. 
After having closed the water supply tap, unscrew the end of the water 
intake hose, remove the filter A and clean it delicately under running 
water. Reassemble filter A in its seat and carefully screw the water 
intake hose back into position. 
  
 
 CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the 
nozzles, to prevent possible clogging. Wash them under running water 
and carefully replace them in their seats, checking that their rotary 
movement is in no way impeded. 
 
•  To remove the upper spray arm, unscrew locking ring R. 
•  To remove the lower spray arm, simply lift it up, pulling by the 
central part. 
•  To remove the orbital spray arm assembly, take hold of the longer 
arm and pull the orbital unit upward. Wash the arms under a jet of 
running water and return them carefully to their seat. After 
reassembly, check that the spray arms turn freely. Otherwise, 
check that they have been installed correctly. 
 
  
              
ORBITAL
 
						

							 
User instructions   
 
 
35   CLEANING THE FILTER UNIT •  It is advisable to periodically inspect the centre filter C and, if 
necessary, to clean it. To remove the filter, grip the tabs, turn them  
anticlockwise and lift upwards; 
•  push the centre filter D from the underside to remove it from the 
micro-filter: 
•  separate the two parts which make up the plastic filter by pressing 
the body of the filter in the zone shown by the arrows; 
•  remove the centre filter by lifting it upwards. 
 
 
 
 
  
 GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT 
MAINTENANCE: 
• The filters should be cleaned under running water using a stiff 
brush. 
• When removing the filter, take care that there are no food residues 
on it. If any residues fall into the washing pit they might block 
hydraulic components, or foul the spray arm nozzles. 
• It is essential to thoroughly clean the filters according to the 
above instructions: the dishwasher cannot function if the filters are 
clogged. 
• Carefully replace the filters in their seats, to avoid damaging the 
wash pump. 
 
PROLONGED DISUSE: 
• Run the soak program twice in succession. 
• Unplug the power cord from the socket. 
• Leave the door slightly open,  in order to prevent the formation of 
unpleasant odours inside the washing tank. 
• Fill the rinse aid dispenser. 
• Shut off the water supply tap.    
 
						

							 User instructions    
 
36 
  
  
 
BEFORE STARTING THE DISHWASHER AFTER PROLONGED 
DISUSE: 
 
• Check that there are no deposits of sludge or rust inside the water 
pipe: if there are, allow the water to run from the water supply tap for 
a few minutes. 
• Plug the power cord back into the socket. 
• Reconnect the water intake hose and open the tap again. 
 
 
 
TROUBLESHOOTING MINOR PROBLEMS 
 
In some cases it is possible to remedy minor problems by referring to the 
following instructions: 
 
If the program fails to start, check that: 
 
• the dishwasher is connected to the electrical power supply; 
• there is no power failure; 
• the water tap is open; 
• the dishwasher door is properly closed. 
 
If water remains inside the dishwasher, check that: 
 
• the drain hose is not kinked; 
• the drain siphon is not obstructed; 
• the dishwasher filters are not clogged. 
 
If the dishes are not being cleaned properly, check that: 
 
• the correct amount of detergent has been added; 
• there is regenerating salt inside the special container; 
• the dishes are being loaded correctly; 
• the selected program is suitable for the dish types and their degree 
of soiling; 
• all the filters are clean and positioned correctly; 
• the spray arm nozzles are not obstructed; 
• there is no object obstructing the rotation of the spray arms. 
 
  
 
						

							 
User instructions   
 
 
37  
  
 
If the dishes fail to dry or remain dull, check that: 
 
• there is rinse aid inside the special container; 
• the rinse aid dispenser setting is correct; 
• the detergent used is of good quality and has not lost its 
effectiveness (for example, through incorrect storage, with the box 
left open). 
 
If the dishes show signs of streaking, staining, etc., check that: 
 
• the rinse aid dispenser setting is not too high. 
 
If there are visible traces of rust inside the tank: 
 
• the tank is made of steel, and therefore any rust marks are due to 
external elements (fragments of rust from the water pipes, pots, 
cutlery, etc.). Special products are commercially available to remove 
such marks; 
• check that the amount of detergent being used is correct. Certain 
detergents can be more corrosive than others. 
• check that the cap of the salt container is securely closed, and that 
the water softening setting is correct. 
  
 
 
 
 
  
 
If after following the above troubleshooting instructions the problem 
persists, call the nearest After-Sales Centre. 
 
WARNING: any operations performed on the appliance by 
unauthorised persons are not covered by the warranty and shall be 
paid for by the user. 
 
 
  
 
						

							 User instructions    
 
38 
6. Troubleshooting 
 
 The dishwasher is equipped with a self-diagnostics system that is capable of 
detecting and signalling a number of possible faults 
 
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM  
FAULT DESCRIPTION 
Err01 The anti-flooding system (where present) has been tripped. 
Err02 The water level limitation system has tripped. 
Err03 The appliance cannot heat the water. 
Err04 The temperature sensor is disconnected. 
Err05 The appliance cannot take in the water. 
Err06 The appliance cannot drain the water from the tank. 
Err07 The dishwasher cannot measure the precise water quantity that has 
been loaded. 
Err08 Problem on the water distribution system to the baskets. 
Err09 Water intake system malfunction 
 
If an alarm occurs the appliance interrupts the program in progress and 
signals a fault. 
 • Alarms Err01, Err02, Err03, Err04, Err08 and Err09 interrupt the 
current program immediately. 
• The Err05, Err06 alarms interrupts the running program once the 
cause is resolved, it will bring bach the execution of the program. 
• The alarm Err07 is visualized at the end of the cycle that comes, 
however, brought to the end since the operation of the dishwasher is 
not harmed. 
 To “reset” an alarm is necessary:  •  Open and close the door, or turn off and on the machine. At this 
point is possible to program the dishwasher again.
 
 
 
   If the malfunction persists, contact your authorised Service Centre.