Smeg Sta6539l Instruction Manual

 
 
User instructions   
 
 9     
3.  Description of the controls  
3.1  Upper panel  All  the  dishwasher  controls  are  grouped  on  the  upper  panel.  Switch-on, 
programming,  switch-off  etc.  procedures  are  only  po ssible  when  the 
door is open.
   
    
1 ON/OFF BUTTON  
Pressing this button energises the appliance. 
2 
SELECTED PROGRAM  INDICATOR LIGHTS 
Illumination  of  this  light  denotes  the  program  sele cted  and  the 
occurrence of a fault (troubleshooting). 
3 
PROGRAM...

 
 
User instructions   
  
10 
 
8 
ENERSAVE OPTION + EXTRA OPTION BUTTON 
(see “EXTRA OPTIONS” section) 
Press the button to enable/disable the option.  
9 ENERSAVE OPTION LIGHT  
Illuminates to indicate that the function is activa ted. 
10 HALF LOAD BUTTON 
Press this button to activate the half load wash op tion. 
11 HALF LOAD LIGHT 
Illuminates to indicate that the function is activa ted. 
12 3/1 OPTION (EXTRA OPTION) LIGHT 
Illuminates to indicate that the function is activa ted. 
13 PROGRAM DELAY...

 
 
User instructions   
 
 11 
 
PROGRAMS TABLE  The  manual  contains  the  programs  table  for  several models.  To  find  the 
table for your dishwasher, compare the program symb ols at the top of the 
table with those on your control panel.  
   
      
SETTING THE WASHING PROGRAM AND SWITCHING ON  After  identifying  the  most  suitable  program  with  th e  aid  of  the  programs 
table: 
 ·   Press  the  ON/OFF button  (1)  and  wait  for  the  PROGRAM 
INDICATOR LIGHT (2)  to illuminate; 
·...

 
 
User instructions   
  
12  
PROGRAMS TABLE  
 
      
 PROGRAMME, NUMBER & SYMBOL  
 LOAD CROCKERY AND CUTLERY 
 PROGRAM PROGRESS 
 DURATION  
 CONSUMPTION  MINUTES (1)  
 WATER LITRES 
 POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load. Cold prewash 
 
15 
 
3,5 0,02 
2 LIGHT 
 
Delicate dishes with normal dirt. 
Wash at 45°C Cold rinse Rinse at 70°C Dry 
 
65 
 
9,5 1,10 
 3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues. 
Cold prewash Wash at 50°C...

 
 
User instructions   
 
 13 
QUICK TIME PROGRAMS (see relevant section for explanation of functioning modes) 
 
 PROGRAMME NUMBER E SYMBOL  
 LOAD CROCKERY AND CUTLERY  PROGRAM PROGRESS 
 DURATION  
 CONSUMPTION  MINUTI (1)  
 WATER LITRES 
 POWER KWh (1) 
6 RAPID 27’ 
+ 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27 
 
6,5 0,70 
7 ECO QUICK 
+ 
Dishes with normal dirt, washed immediately after use. 
Cold prewash Wash at 55°C Cold rinse Rinse at 70°C 
 
80...

 
 
User instructions   
  
14  
PROGRAMS TABLE  
      
PROGRAMME NUMBER & SYMBOL 
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS 
 DURATION   CONSUMPTION  MINUTES (1)  
WATER LITRES POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load Cold prewash 15 3,5 0,02 
2 GLASS  
 
Glass, china and mixed dishes with light dirt. 
Wash at 45°C Cold rinse Rinse at 70°C Dry 
 
65 
 
9,5 1,10 
3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues 
Cold prewash Wash at 50°C Cold...

 
 
User instructions   
 
 15 
QUICK TIME PROGRAMS (see relevant section for explanation of functioning modes)  
 PROGRAMME NUMBER E SYMBOL  
 LOAD CROCKERY AND CUTLERY  PROGRAM PROGRESS 
 DURATION  
 CONSUMPTION  MINUTI (1)  
 WATER LITRES 
 POWER KWh (1) 
6 RAPID 27’ 
+ 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27 
 
6,5 0,70 
7 ECO QUICK 
+ 
Dishes with normal dirt, washed immediately after use. 
Cold prewash Wash at 55°C Cold rinse Rinse at 70°C 
 
80...

 
 
User instructions   
  
16 
 
NOTES AND REFERENCES  Only run the soak program with half loads.  Options  cannot be used with the soak program. 
* Standard programme under EN 50242. If present, the ENERSAVE option must 
be enabled . 
**  See information sheet provided 
*** IEC/DIN reference  programme.  If  present,  the ENERSAVE  option  must be 
enabled. 
**** Reference program for laboratories: Detergent: 25g in the dispenser + 10g in 
the  door  or tablet.  Configuration : see photo in “Using the...

 
 
User instructions   
 
 17 
3.2  Washing programs   
  
Before starting a washing program make sure that: 
·  The water supply tap is  open. 
·  The  correct amount of detergent  has been added to the 
dispenser. 
·  The baskets have been  correctly loaded. 
·  The  spray  arms  are  able  to  rotate  freely and  without 
obstruction. 
·  The dishwasher door is  securely closed.      
 
 QUICK TIME PROGRAMS  Select  this  option  together  with  any  washing  progra m  (except  the  soak  program)...

 
 
User instructions   
  
18 
 
 
SPREAD HALF LOAD  Suitable  when  there  are not many  dishes  to  be  washe d,  it saves  energy 
and  reduces  the  program  duration.    Place  dishes  in  both  baskets  then 
load  the  detergent  dispenser  than  less than  the nor mal  amount  for a  full 
load.
 
   
    
 
EXTRA OPTIONS - “Flexi Tabs” BUTTON  Press  buttons  6  +  8  (QUICK  TIME  PROGRAMS   button  + ENERSAVE  
option  button)   simultaneously  to  activate  the Flexi  Tabs  option;  the...