Smeg St338l Instruction Manual

 
 
User instructions   
 
 29 
Supports  for  cups  and  long  objects 
(ladles,  spoons,  etc.),  in  the  rear; 
can  be  tipped  to  the  vertical 
position when not in use. 
  
Glass  holder.  Support  for  long-
stem  glasses.  When  lifted  out  of 
the stowed position (0) it snaps into 
three different positions (1-2-3). 
 
   
2-position fold-down supports (1-2). In position 1 (vertical) they can be 
used to take plates, while in position 2 (slanted) they provide support for 
long-stem glasses...

 
 
User instructions   
  
30 
To lie completely flat, lift the end and turn it to wards you so that the 
retainer F rotates into place above point  S. 
    LOADING THE LOWER BASKET  Carefully  load  flat  plates,  soup  plates,  dessert  an d  serving  dishes, 
positioning  them  vertically.  Pots,  pans  and  their  c overs  must  be  loaded 
upside  down.  When  loading  soup  plates  and  dessert  b owls,  be  sure  to 
leave a gap between them. 
 Loading examples:  
                    
       

 
 
User instructions   
 
 31 
TOP CUTLERY BASKET  The  basket  is  designed  to  take  cutlery,  placed  in  the  spaces  provided, 
and long utensils, positioned lengthwise. 
The  “drawer”  extraction  system  makes  the  basket  eas ier  to  load,  but  it 
can  also  be  taken  completely  off  its  runners  by  removing  the  retainers 
(as shown here). 
Take  great  care  to  replace  the  retainers  to  ensure that  the  basket  does 
not come off the runners accidentally.   
    
   
        

 
 
User instructions   
  
32 
CUTLERY BASKET  The  basket  has   removable  top  grids   into  which  items  of  cutlery  should 
be  inserted  to  keep  them  properly  spaced  and  allow  water  to  pass 
between  them effectively.  The  top grids  and central lid  are  in  the bag  of 
accessories. The central lid  functions as a  lid only.  
The top grids can be  detached and used separately . 
The  cutlery  should  be  arranged  in  an  orderly  manner   inside  the  basket, 
with  the  handles...

 
 
User instructions   
 
 33 
UPPER BASKET  It is recommended to load the upper basket with small- or medium-sized 
items  such  as  glasses,  small  plates,  tea  or  coffee cups,  shallow  bowls 
and  light  objects  made  from  heat  resistant  plastic.  If  the  upper  basket  is 
used in the lowermost position, it can also be loaded with serving dishes, 
provided they are only slightly soiled.     
 
LOADING THE UPPER BASKET  Load  plates  facing  forward;  cups,  bowls  etc.  must  a lways  be...

 
 
User instructions   
  
34 
Examples of loading for intensive dirt:    
         
                                      
       

 
 
User instructions   
 
 35 
Depending on the models, the basket may be equipped with some or all 
of the following accessories: 
-  Supports for cups or long objects (ladles, spoons… ), on the left; 
can be tipped to the vertical position when not in  use. 
-   Long-stemmed glass holder, on the left; to use, si mply lift and 
fix onto the hooks provided. 
-   Cutlery racks, on the right, designed for knives a nd teaspoons; 
for teaspoons, pull out the sliding support. The ra cks can be 
tipped to the...

 
 
User instructions   
  
36 
        ADJUSTING THE UPPER BASKET 
The  height  of  the  top  basket  can  be  adjusted  to  all ow  large  dishes  or 
pans to be placed in the bottom basket.  
The  adjustment  procedure  may  be  type  A  or  B,  depending  on  the 
dishwasher model purchased. 
           Version A: pull-out with adjustment in two positions. 
·   Pull out both the basket guides. 
·   Remove the stops, first releasing them as shown in  the diagram. 
·   Pull out the basket. 
·   Fit...

 
 
User instructions   
 
 37 
5.  Cleaning and maintenance  
 
Before carrying out any work, always unplug the appliance from the 
electrical supply or switch off the all-pole disconnection device. 
 
5.1  General warnings and recommendations   Avoid the use of acidic or abrasive detergents.  Clean  the  outer  surfaces  and  door-lining  of  the  dis hwasher  regularly 
using  a  soft  cloth  moistened  with  water  or  with  a  n ormal  detergent 
suitable  for  painted  surfaces.  Clean  the  door...

 
 
User instructions   
  
38   CLEANING THE FILTER UNIT  ·  It  is  advisable  to  periodically  inspect  the  centre   filter C and,  if 
necessary,  to  clean  it.  To  remove  the  filter,  grip  the  tabs,  turn  them  
anticlockwise and lift upwards; 
·   push  the  centre  filter  D from  the  underside  to  remove  it  from  the 
micro-filter: 
·   separate  the  two  parts  which  make  up  the  plastic  f ilter  by  pressing 
the body of the filter in the zone shown by the arr ows; 
·   remove...