Smeg St338l Instruction Manual

 INSTRUCTION MANUAL 
GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS 
 

Contents   
 
1 
  
    
1.
 Safety and operating instructions _________________ __________ 2 
2. Installation and hook-up __________________________ ________ 5 
3. Description of the controls  ________________________________ 9 
4. Operating instructions ____________________________ _______ 21 
5. Cleaning and maintenance __________________________ _____ 37 
6. Troubleshooting  ___________________________________ ____ 41 
 
   
 
Thank you for choosing one of our products. 
You  are  advised  to  read...

 Safety instructions 
 
 
2   
1.  Safety and operating instructions 
 
  THIS  MANUAL  FORMS  AN  INTEGRAL  PART  OF  THE  APPLIANCE
:  IT  MUST 
ALWAYS  BE  KEPT  INTACT  TOGETHER  WITH  THE  DISHWASHER.   BEFORE 
USING  THE  APPLIANCE,  CAREFULLY  READ  ALL  THE  INSTRUC TIONS 
CONTAINED IN THIS MANUAL.   
INSTALLATION  MUST  BE  PERFORMED  BY  A  QUALIFIED  TECHN ICIAN,  IN 
COMPLIANCE  WITH  THE  REGULATIONS  IN  FORCE.  THIS  APPL IANCE  IS 
INTENDED  FOR  DOMESTIC  USE  AND  SIMILAR  APPLICATIONS...

Safety instructions 
  
 3 
 
WARNING:  SOME  DISHWASHER  DETERGENTS  ARE  STRONGLY  ALKALINE. 
THEY  CAN  BE  EXTREMELY  DANGEROUS  IF  SWALLOWED.  AVOID  
CONTACT  WITH  THE  SKIN  AND  EYES  AND  KEEP  CHILDREN  AW AY  FROM 
THE  DISHWASHER  WHEN  THE  DOOR  IS  OPEN.  CHECK  THAT  TH E 
DETERGENT  RECEPTACLE  IS  EMPTY  AFTER  COMPLETION  OF  T HE  WASH 
CYCLE. 
 
 
OBSOLETE  APPLIANCES  MUST  BE  RENDERED  UNUSABLE.  CUT  OFF  THE 
MAINS  POWER  CORD  AFTER  UNPLUGGING  IT    FROM  THE  WALL...

 Safety instructions 
 
 
4  
 
DO  NOT  DRINK  THE  WATER  RESIDUES  WHICH  MAY  BE  PRESEN T  INSIDE 
THE  DISHES  OR  DISHWASHER  AT  THE  END  OF  THE  WASHING  PROGRAM 
AND BEFORE THE DRYING CYCLE. 
 
 
LEANING  OR  SITTING  ON  THE  DISHWASHER  DOOR  WHEN  OPEN  MAY CAUSE THE APPLIANCE TO OVERTURN, PUTING PEOPLE AT R ISK. 
NEVER  LEAVE  THE  DISHWASHER  DOOR  OPEN;  PEOPLE  MIGHT  TRIP 
OVER IT.  
 
 
KNIVES  OR  OTHER SHARP-ENDED  COOKING  UTENSILS  MUST  B E  PLACED 
IN  THE  CUTLERY  BASKET...

 
 
Installation instructions   
 
 5  
2.  Installation and hook-up     
Remove the polystyrene basket retainers.  
Position  the  appliance  in  the  desired  place  of  installation.  The  back  or 
sides  of  the  dishwasher  may  be  placed  up  against  wa lls  or  other 
furniture  units.  If  the  dishwasher  is  installed  near  a  heat  source,  fit  the 
special  insulating  panel  to  prevent  overheating  and   malfunction  of  the 
appliance.  To  ensure  stability,  install  integrated  or...

 
 
Installation instructions   
  6  2.1  Water supply connection    
  
 Preventing the risk of clogging or damage:  if the water pipe is new or 
has not been used for a long time, before connectin g to the water supply 
check that the water is clear and free of impurities, to prevent damage to 
the appliance.  
The  dishwasher  must  always  be  connected  to  the  wate r  system 
with new hoses; old or used hoses must never be reused.      
CONNECTING TO THE WATER SUPPLY  Connect  the  intake  hose...

 
 
Installation instructions   
 
 7 
2.2  Electrical connection and precautions 
 
 
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE  RATINGS  ON  THE  NAME  PLATE  OF  THE  APPLIANCE  POSITIONED  ON THE INNER EDGE OF THE DOOR. 
 
 
THE  PLUG  ON  THE  SUPPLY  CORD  AND  THE  CORRESPONDING  S OCKET OUTLET  MUST  BE  OF  THE  SAME  TYPE  AND  MEET  THE  REGULATIONS  IN FORCE.  THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.  NEVER  DISCONNECT  THE  PLUG  BY  PULLING  ON  THE  POWER  S...

 
 
Installation instructions   
  8                   
 
Some  components  are  live  even  with  the  ON/OFF  butto n  in  the  OFF position.  Before  maintenance  work  on  the  appliance,  remove  the  plug  or turn off the power supply at the wall switch.                     
FOR GREAT BRITAIN ONLY: 
 
 THIS APPLIANCE MUST BE EARTHED. 
  Fuse replacement  If  the  mains  lead  of  this  appliance  is  fitted 
with  a BS  1363A  13amp   fused  plug,  to 
change  a  fuse  in  this  type  of  plug  use...