Smeg St313 Instruction Manual

 
 
User instructions   
 
 9     
3.  Description of the controls    
3.1  Upper panel  All  the  dishwasher  controls  are  grouped  on  the  upper  panel.  Switch-on, 
programming,  switch-off,  etc.  procedures  are  only  p ossible  when  the  door  is 
open. 
  
  
The  panel  shown  is  only  a  guideline  example:  the  fo rm  of  the  lights  and 
buttons may vary depending on the model. 
   
1 ON/OFF BUTTON  
Press this button to switch the dishwasher on/off. 
2 
SELECTED PROGRAM INDICATOR...

 
 
User instructions   
  
10    
  
Depending  on  the  model,  this  zone  may  contain  one  o r  more  of  the 
following  options,  identified  by  the  relative  symbo ls  and  described  in 
more detail in the relevant sections of the manual.  
It is not possible  to select any options when the  soak program is being 
used.  All  options  except  Flexi  Tabs   are  disabled   at  the  end  of  the 
wash  cycle.  To  disable  the  “Flexi  tabs”  option,  press   the  relative 
button (the light...

 
 
User instructions   
 
 11  
PROGRAMS TABLE  The  manual  contains  the  programs  table  for  several models.  To  find  the 
table for your dishwasher, compare the program symb ols at the top of the 
table with those on your control panel.  
     
     
SETTING THE WASHING PROGRAM AND SWITCHING ON  After  identifying  the  most  suitable  program  with  th e  aid  of  the  programs 
table: 
 ·   Press  the  ON/OFF button  (1)  and  wait  for  the  PROGRAM 
INDICATOR LIGHT (2)  to illuminate; 
·...

 
 
User instructions   
 
12 
PROGRAMS TABLE  
      
PROGRAMME NUMBER & SYMBOL 
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS 
 DURATION   CONSUMPTION  MINUTES (1)  
 WATER LITRES POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load Cold prewash 15 3,5 0,02 
2 RAPID  
 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27 
 
6,5 0,70 
3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues 
Cold prewash Wash at 50°C  (2) Rinse at...

 
 
User instructions   
 
 13 
PROGRAMS TABLE  
       
PROGRAMME NUMBER & SYMBOL 
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS 
 DURATION   CONSUMPTION  MINUTES (1)  
 WATER LITRES POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load Cold prewash 15 3,5 0,02 
2 RAPID  
 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27 
 
6,5 0,70 
3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues 
Cold prewash Wash at 50°C  (2) Rinse at...

 
 
User instructions   
 
14 
PROGRAMS TABLE  
 
     
PROGRAMME NUMBER & SYMBOL 
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS 
 DURATION   CONSUMPTION  MINUTES (1)  
 WATER LITRES POWER KWh (1) 
1 SOAK 
 
Pans and dishes awaiting completion of the load Cold prewash 15 3,5 0,02 
2 RAPID  
 
Dishes with light dirt, washed immediately after use 
Wash at 38°C Rinse at 50°C 
 
27 
 
6,5 0,70 
3 ECO (*) 
 EN 50242 
Dishes with normal dirt, even with dried-on residues 
Cold prewash Wash at 50°C  (2) Rinse at...

 
 
User instructions   
 
 15 
NOTES AND REFERENCES  Only run the soak program with half loads.  Options cannot be used with the soak program. 
* Standard programme under EN 50242. 
**  See information sheet provided 
*** IEC/DIN reference programme. 
****  Reference program for laboratories: Detergent: 20g in the dispenser + 10g in 
the  door  or tablet.  Configuration : see photo in “Using the baskets”. 
(1)  The  cycle  duration  and  power  consumption  may  va ry  according  to  the  water 
and...

 
 
User instructions   
  
16                        3.2  Washing programs   
  
 Before starting a washing program make sure that:  
·  The water supply tap is  open. 
·  The softener  container contains regenerating salt . 
·  The  correct amount of detergent  has been added to the 
dispenser. 
·  The baskets have been  correctly loaded. 
·  The  spray  arms  are  able  to  rotate  freely  and  without 
obstruction. 
·  The dishwasher door is securely closed.     
  
 OPTION SELECTION 
Options are...

 
 
User instructions   
 
 17  
 
Flexi Tabs 
Ideal  for  multi-function  detergents,  this  option  allows  washing  to  be 
optimised,  with  full  benefits  from  the  combined-act ion  tablets. When  this 
option  is  activated,  any  salt  and  rinse  aid  in  the  relative  containers  will 
not be used. 
 If  the  option is  not  provided ,  we  recommend  the  use  of conventional 
products   (separate  detergent,  salt  and  rinse  aid),  because  with 
conventional  washing  cycles,  combined...

 
 
User instructions   
  
18  
 
PROGRAM DELAY 
The start of the program can be delayed by  3, 6 or 9 hours. 
This  allows  you  to  set  the  dishwasher  to  work  at  th e  times  of  day  most 
convenient to you.  After setting the program , press the button to select 
the  delay  you  require;  the  corresponding  light  will   come  on.  When  the 
door  is  closed,  the  appliance  will  prewash  the  dish es,  after  which  the 
program  delay  set  will  come  into  effect.  If  you  w ish  to...