SMC Networks Router SMCWBR14S-N2 User Manual

RJ-45 CABLE
B-3
Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for 
transmitting data, and pins 3 and 6 for receiving data.
Straight-Through Wiring
If the port on the attached device has internal crossover wiring (MDI-X), 
then use straight-through cable.
RJ-45 Pin Assignments
Pin Number
Assignment
1
1Tx+
2Tx-
3Rx+
6Rx-
1:  The “+” and “-” signs represent the polarity of the wires 
that make up each wire pair.
Straight-Through Cable Pin Assignments
End 1 End 2
1 (Tx+) 1 (Tx+)
2...

CABLES
B-4
Crossover Wiring
If the port on the attached device has straight-through wiring (MDI), use 
crossover cable.
Crossover Cable Pin Assignments
End 1 End 2
1 (Tx+) 3 (Rx+)
2 (Tx-) 6 (Rx-)
3 (Rx+) 1 (Tx+)
6 (Rx-) 2 (Tx-) 

C-1
APPENDIX C
SPECIFICATIONS
IEEE Standards
IEEE 802.3 10 BASE-T Ethernet 
IEEE 802.3u 100 BASE-TX Fast Ethernet
IEEE 802.3, 802.3u, 802.11g, 802.1D
LAN Interface
4 RJ-45 10 BASE-T/100 BASE-TX ports
Auto-negotiates the connection speed to 10 Mbps Ethernet or 100 Mbps 
Fast Ethernet, and the transmission mode to half-duplex or full-duplex
WA N  I n t e r f a c e
1 RJ-45 port
Indicator Panel
Power, WAN, Online, WLAN, LAN 1~4, WPS
Dimensions
188 x 133 x 33 mm (7.40 x 5.24 x 1.30 in)
We i g h t
0.285 kg...

SPECIFICATIONS
C-2
Advanced Features
Dynamic IP Address Configuration – DHCP, DNS
Firewall – Client privileges, hacker prevention and logging, 
Stateful Packet Inspection
Virtual Private Network – PPTP, L2TP, IPSec pass-through, VPN 
pass-through
Internet Standards
RFC 826 ARP, RFC 791 IP, RFC 792 ICMP, RFC 768 UDP, RFC 793 TCP, 
RFC 783 TFTP, RFC 1661 PPP, RFC 1866 HTML, RFC 2068 HTTP
Radio Features
Wireless RF module Frequency Band
802.11n Radio: 2.4GHz
802.11g Radio: 2.4GHz
802.11b Radio: 2.4GHz
USA -...

SPECIFICATIONS
C-3
Operating Channels IEEE 802.11b Compliant:
11 channels (US, Canada)
13 channels (Europe)
14 channels (Japan)
Standards Compliance
Safety
LVD
Environmental
CE Mark
Temperature
Operating 0 to 40 °C (32 to 104 °F)
Storage -40 to 70 °C (-40 to 158 °F)
Humidity
5% to 95% (non-condensing)
Vibration
IEC 68-2-36, IEC 68-2-6
Shock
IEC 68-2-29
Drop
IEC 68-2-32 

SMCWBR11-G SMCWBR14S-N2