Home > SMC Networks > Router > SMC Networks Router SMCWBR14S-N2 User Manual

SMC Networks Router SMCWBR14S-N2 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual SMC Networks Router SMCWBR14S-N2 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 SMC Networks manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							RJ-45 CABLE
    B-3
    Pin Assignments
    With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for 
    transmitting data, and pins 3 and 6 for receiving data.
    Straight-Through Wiring
    If the port on the attached device has internal crossover wiring (MDI-X), 
    then use straight-through cable.
    RJ-45 Pin Assignments
    Pin Number
    Assignment
    1
    1Tx+
    2Tx-
    3Rx+
    6Rx-
    1:  The “+” and “-” signs represent the polarity of the wires 
    that make up each wire pair.
    Straight-Through Cable Pin Assignments
    End 1 End 2
    1 (Tx+) 1 (Tx+)
    2 (Tx-) 2 (Tx-)
    3 (Rx+) 3 (Rx+)
    6 (Rx-) 6 (Rx-) 
    						
    							CABLES
    B-4
    Crossover Wiring
    If the port on the attached device has straight-through wiring (MDI), use 
    crossover cable.
    Crossover Cable Pin Assignments
    End 1 End 2
    1 (Tx+) 3 (Rx+)
    2 (Tx-) 6 (Rx-)
    3 (Rx+) 1 (Tx+)
    6 (Rx-) 2 (Tx-) 
    						
    							C-1
    APPENDIX C
    SPECIFICATIONS
    IEEE Standards
    IEEE 802.3 10 BASE-T Ethernet 
    IEEE 802.3u 100 BASE-TX Fast Ethernet
    IEEE 802.3, 802.3u, 802.11g, 802.1D
    LAN Interface
    4 RJ-45 10 BASE-T/100 BASE-TX ports
    Auto-negotiates the connection speed to 10 Mbps Ethernet or 100 Mbps 
    Fast Ethernet, and the transmission mode to half-duplex or full-duplex
    WA N  I n t e r f a c e
    1 RJ-45 port
    Indicator Panel
    Power, WAN, Online, WLAN, LAN 1~4, WPS
    Dimensions
    188 x 133 x 33 mm (7.40 x 5.24 x 1.30 in)
    We i g h t
    0.285 kg (0.764 lbs)
    Input Power
    9 V 1 A
    Power Consumption
    8 Watts maximum 
    						
    							SPECIFICATIONS
    C-2
    Advanced Features
    Dynamic IP Address Configuration – DHCP, DNS
    Firewall – Client privileges, hacker prevention and logging, 
    Stateful Packet Inspection
    Virtual Private Network – PPTP, L2TP, IPSec pass-through, VPN 
    pass-through
    Internet Standards
    RFC 826 ARP, RFC 791 IP, RFC 792 ICMP, RFC 768 UDP, RFC 793 TCP, 
    RFC 783 TFTP, RFC 1661 PPP, RFC 1866 HTML, RFC 2068 HTTP
    Radio Features
    Wireless RF module Frequency Band
    802.11n Radio: 2.4GHz
    802.11g Radio: 2.4GHz
    802.11b Radio: 2.4GHz
    USA - FCC
    2412~2462MHz (Ch1~Ch11)
    Canada - IC
    2412~2462MHz (Ch1~Ch11)
    Europe - ETSI
    2412~2472MHz (Ch1~Ch13)
    Japan - STD-T66/STD-33
    2412~2484MHz (Ch1~Ch14)
    Modulation Type
    OFDM, CCK
    Operating Channels IEEE 802.11n Compliant:
    11 channels (US, Canada, Europe, Japan)
    Operating Channels IEEE 802.11g Compliant:
    11 channels (US, Canada)
    13 channels (Europe, Japan) 
    						
    							SPECIFICATIONS
    C-3
    Operating Channels IEEE 802.11b Compliant:
    11 channels (US, Canada)
    13 channels (Europe)
    14 channels (Japan)
    Standards Compliance
    Safety
    LVD
    Environmental
    CE Mark
    Temperature
    Operating 0 to 40 °C (32 to 104 °F)
    Storage -40 to 70 °C (-40 to 158 °F)
    Humidity
    5% to 95% (non-condensing)
    Vibration
    IEC 68-2-36, IEC 68-2-6
    Shock
    IEC 68-2-29
    Drop
    IEC 68-2-32 
    						
    All SMC Networks manuals Comments (0)

    Related Manuals for SMC Networks Router SMCWBR14S-N2 User Manual