SMC Networks Router SMCWBR14-G2 User Manual

							CONFIGURING THE CLIENT PC
3-13
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on page 3-9.
2. Select Use the following IP 
Address.
3. Enter an IP address based on 
the default network 
192.168.2.x (where x is 
between 2 and 254), and use 
255.255.255.0 for the subnet 
mask. Use 
192.168.2.1 for the 
Default gateway field.
4. Select Use the following 
DNS server addresses.
5. Enter the IP address for the Barricade in the Preferred DNS server 
field. This automatically relays DNS requests to the DNS server(s) 
provided by your ISP. Otherwise, add a specific DNS server into the 
Alternate DNS Server field and click OK to close the dialog boxes.
6. Record the configured information in the following table.
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Preferred DNS Server ____.____.____.____
Alternate DNS Server ____.____.____.____
Default Gateway ____.____.____.____ 
						

							TCP/IP CONFIGURATION
3-14
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser is 
disabled. This is so that your browser can view the Barricade’s HTML 
configuration pages.
1. To disable the proxy in 
Internet Explorer, click 
To o l s. Click Internet 
Options... and then 
the Connections tab, 
shown on the right. 
In 
the Local Area Network 
(LAN) settings section, 
click 
LAN Settings... 
to display the Local 
Area Network (LAN) 
Settings pop-up window 
below.
2. In the Proxy server 
section, ensure the Use 
a proxy server for 
your LAN (These 
settings will not apply 
to dial-up or VPN 
connections) check 
box is not ticked.
3. Click OK. 
						

							CONFIGURING THE CLIENT PC
3-15
Configuring Your Macintosh Computer
You may find that the instructions here do not exactly match your 
operating system. This is because these steps and screen shots were created 
using Mac OS 10.2. Mac OS 7.x and above are similar, but may not be 
identical to Mac OS 10.2.
Follow these instructions:
1. Pull down the Apple Menu. Click 
System Preferences.
2. Double-click the Network icon in the 
Systems Preferences window. 
						

							CONFIGURING YOUR MACINTOSH COMPUTER
3-16
3. If Using DHCP Server is 
already selected in the 
Configure field, your 
computer is already 
configured for DHCP. If 
not, select this option.
4. Your new settings are shown in the TCP/IP tab. Verify that your IP 
Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and 
your Default Gateway is 192.168.2.1. These values confirm that your 
Barricade is functioning.
5. Close the Network window.
Now your computer is configured to connect to the Barricade. 
						

							CONFIGURING THE CLIENT PC
3-17
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser is 
disabled. This is so that your browser can view the Barricade’s HTML 
configuration pages. The following steps are for Internet Explorer.
Internet Explorer
1. Open Internet Explorer and click the Stop 
button. Click Explorer/Preferences.
2. In the Internet Explorer Preferences window, 
under Network, select Proxies.
3. Uncheck all check boxes and click OK. 
						

							CONFIGURING YOUR MACINTOSH COMPUTER
3-18 
						

							4-1
CHAPTER 4
C
ONFIGURING THE
BARRICADE
After you have configured TCP/IP on a client computer, use a web 
browser to configure the Barricade. The Barricade can be configured by 
any Java-supported browser such as Internet Explorer 5.5 or above. Using 
the web management interface, you can configure the Barricade and view 
statistics to monitor network activity.
To access the Barricade’s management interface, enter the IP address of 
the Barricade in your web browser:
http://192.168.2.1
(The Barricade automatically switches to Port 80 for management access.)  
						

							CONFIGURING THE BAR RICADE
4-2
Navigating the Web Browser Interface
The Barricade’s management interface consists of a Setup Wizard, a Home 
Network Settings section, a Security section and an Advanced Settings 
section.
Setup Wizard: Use the Setup Wizard for quick and easy configuration of 
your Internet connection and basic LAN settings. Go to “Setup Wizard” 
on page 4-5.
Home Network Settings: Use the Home Network Settings section to 
configure your LAN, WAN and wireless settings. Go to “Home Network 
Settings” on page 4-13.
Security: In this section, you can easily configure your wireless security 
settings. Go to “Security” on page 4-27.
Advanced Settings: Advanced Settings supports more advanced 
functions like NAT, system maintenance and UPnP. Go to “Advanced 
Settings” on page 4-51. 
						

							NAVIGATING THE WEB BROWSER INTERFACE
4-3
Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once a 
configuration change has been made on a page, be sure to click the Apply 
or Save Settings or NEXT button at the bottom of the page to enable 
the new setting.
Note:To ensure proper screen refresh after a command entry, be sure 
that Internet Explorer 5.5 is configured as follows: Under the 
menu Tools/Internet Options.../General/Temporary Internet 
Files/Settings..., the setting for Check for newer versions of 
stored pages should be Every visit to the page. 
						

							CONFIGURING THE BAR RICADE
4-4
Login Screen
The Login screen automatically appears first. 
Enter the default password “smcadmin” and then click LOGIN.
Note:Your password is case sensitive.