Sim2 Multimedia Projector Proc3 User Manual

460623000
proc3
user and installation manual 

2
proc3

Different input signal resolutions can be adapted to match the specified screen  resolution  without  loss  of  image  quality,  thanks  to  a  generous selection of preset aspect ratios, some of which are user definable.
All picture adjustments can be made with the remote control interac-ting  with  a  simple  menu-activated  On  Screen  Display;  alternatively, the  projector  can  be  controlled  by  a  domestic  automation  system via its serial port.
The appliance has been subjected to...

3
proc3

CAUTIONTo reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing th\
e top cover of the projector.For technical assistance refer to trained personnel authorised by the man\
ufacturer.
Read all chapters of this manual carefully before switching on the projector. This manual provides basic instructions for using the Pro-C3 system. Installation, preliinary adjustments and procedures that necessitate the removal of the top cover and contact with...

4
proc3

FCC STATEMENT
CLASS B PRODUCT
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio...

5
proc3

•  Read this manual carefully and keep it in a safe place for future consultation. This  manual  contains  important  information  on  how  to install  and  use  this  equipment  correctly.  Before  using  the 
equipment, read the safety prescriptions and instructions carefully. Keep the manual for future consultation.
•  Do not touch internal parts of the units Inside  the  cabinet  there  are  electrical  parts  carr ying dangerously  high  voltages  and  parts  operating  at  high...

6
proc3

•  Never look directly at the projection lamp.  
 Never look directly into the lamp when it is on as the inten-
se light can damage your eyes. Take particular care that 
children cannot do so.
•  Take  special  care  regarding  the  movements  of  the 
lens.
 Do  not  place  objects  in  the  slots  on  the  side  of  the  lens, 
and also ensure that the lens’s horizontal and vertical mo-
vements are unimpeded by external objects.
•  Position the unit on a stable surface.
 Place the projector...

7
proc3

1
2
3
4

3  UNPACKING
To  remove  the  Pro-C3  system  from  its  carton  follow  the  dia-
grams (Fig. 3).
Keep  the  carton  for  use  when  transporting  or  shipping  the 
unit.
Fig. 3
Instruction manual
Remote Control
1.5 V AAA batteries
Power cable Europe, UK, US
Projector
CONTENTS OF PACKAGE
- the projector
- Remote control 
- four 1.5V AAA batteries (for remote control)
- three power cables (EU, UK, USA) for the projector
- the user manual.
If anything is missing, immediately inform...

8
proc3

1 Projection lens.
2 Lens shift knob.
3 Remote control IR sensor on front of unit.
4 Cooling air inlet vents.
5 Adjustable feet.
6 Adjustable carr y-handle.
7 Bulb compartment.
8 Fused power socket.
9 Main power switch.
10 Control keypad
11 Composite video input.
12  S-Video input.
13 RGB / YCrCb input.
14 2 HDMI input
15  Audio output.
16 Remote control input
17  VGA input
18  RS232 serial interface.
19  USB 1.1 interface
20 Motorised screen control outputs.
PROJECTOR
1
5
67+12V
USB...

9
proc3

KEYS 0-9
Select the sources directly. 
Switches on the panel from Standby.
STAND-BY
Set the unit to Stand-by mode.
ESCAPE
Deactivates the On Screen Display.
UP/DOWN/LEFT/RIGhT ARROW KEYS
Navigates  between  the  On  Screen  Display  menus  and 
parameter  settings.  Arrow  Up/Down  call  up  the  quick 
menus.
MENU +
Switches on the On Screen Display and  
navigates between its pages.
MEMORIES
Activates the Memories management menu. 
INFO
Displays information about the selected source
and...

10
proc3

Fig. 6
Position the projector on a stable, suitable platform or utilise the 
optional bracket for a fixed ceiling installation.
WARNING:  If  using  the  ceiling  mount  bracket,  scrupulously 
observe  the  safety  instructions  included  with  the  bracket 
itself.  If  using  a  bracket  other  than  that  supplied  by  SIM2 
Multimedia, make sure that the projector is at least 65 mm 
below the ceiling and that the bracket does not obstruct the 
air vents (intake and outlet).
If the...