Sim2 Multimedia Ht3000 E Projector User Manual

21
ht3000e
MENUS
LANgUAgE
It  allow  to  select  the  languages  available  for  the  On  Screen 
Display menus.
iNPUTS LiST
In order to make the HT3000E system increasingly flexible, the 
functions described below make it possible to modify the inputs 
selection  menu  and  adapt  it  so  that  it  matches  the  require-
ments of the user more closely. The main page displays all the 
inputs physically present on the projector.
You  can  delete  any  inputs  which  are  not  in  use.  To  do  this,...

22
ht3000e
same key as before. Use the ▲ key to switch from upper case 
to lower case characters. Cancel errors with ▼ once you have 
selected the character in question. Once you have terminated 
the text input procedure confirm your text and save it by pres-
sing the MENU+ key on the remote control. If you wish to cancel the 
modifications, press MENU- on the remote control.
f1-f2 keys
The remote control is equipped with two keys (F1 and F2) which 
are associated with various different functions.
The...

23
ht3000e
making a total of 24 different available Memories.
The  image  parameters  that  can  be  saved/recalled  by  the 
Memories management system are the following:
               image                     Picture
                    BRIGHTNESS                             ASPECT
                    CONTRAST                            COLOUR TEMPERATURE
                    COLOUR                            OVERSCAN 
                    TINT                            GAMMA...

24
ht3000e232 )G RAP HICS  RG BHVS-VID EO
AUDIO  OUT
HDM I 1
RE MOTE2S-VID EO
MEN U ESCIN
PU T1
5
4
H DM I 26
Fig.32
Save memory
To  save  the  image  parameter  current  values  in  memor y  1, 
move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open 
the pull-down menu by pressing the ◀ key (Fig.33). Now select 
Save current settings. To confirm the operation, the message 
Current settings saved in Memor y.
Memories 2...6 can be saved using the same procedure.
 
0  Auto 
3        S   MEMORIA 1...

25
ht3000e
iNfO
Displays  the  current  status  of  the  projector  and  information 
concerning the projected video/graphic signal. 
This function is displayed on pressing the  key on the remote 
control (or, in the absence of the On Screen Display, the ▶ key 
on the keypad).
QUiCK MENUS
The quick menus provide access to the main adjustments that 
affect image quality without calling the main menu. Brightness,  
CONTRAST, COLOUR, TINT, SHARPNESSand FILTER adjustments appear at 
the bottom of the screen...

26
ht3000e
11  TROUBLEShOOTiNg gUiDE
No power (LEDs always Off)
•  Check that the units’ power switches are set to I.
•  Check that the power cables are correctly connected to 
the units’ power sockets.
•  Check  the  condition  of  the  fuse  located  on  the  power 
socket on the rear of the projector.
•  Replace the fuse located on the projector’s power socket with an 
identical type (T 5A H).
•  If the fuse blows repeatedly, seek technical assistance from 
your nearest Dealer.
Lamp fails to switch...

27
ht3000e
You  can  purchase  the  following  optional  accessories  at  your 
Dealer:
 - Ceiling mount kit
 - Lens
A  range  of  lenses  are  available  from  our  dealers  to  satisfy 
var ying  installation  and  projection  distance  needs.  See  the 
Additional Information chapter for greater details on projection 
distance and enlargement ratios.
Always contact our service centre to have the lens replaced. 
12   OPTiONAL ACCESSORiES
Use only original or SiM2 Multimedia approved accessories....

28
ht3000e
ELECTRONiCS
Input signals: 	 •	COMPOSITE	VIDEO	(CVBS)          gold plated RCA connectors           1,0 Vpp	/	75	Ω,	negative	synchronisation	 •	1	S-VIDEO	(Y/C)               4-pole mini-DIN connector          Y: 1.0 Vpp	/	75	Ω,	negative	synchronisation	     C: 0.286 Vpp	/	75	Ω,	[	nominal	NTSC	burst	level]	     0.3 Vpp	/	75	Ω	[nominal	PAL,	SECAM	burst	level]	 •	1	COMPONENTS	(Y/Pr/Pb/)	-	RGBS		     1 set of 4 RCA connectors        - Component signals                Y: 1.0 Vpp	/	75	Ω,	negative or...

29
ht3000e
B  ON SCREEN MENU LAYOUT
     IMAGE
 PICTURE
Brightness 
Contrast 
Color 
Tint 
Sharpness 
Filter 
Cinema Mode  
Best Color
Video • S-Video[NTSC]
        
Orientation 
Keystone    
Lens 
Power ON  
Test patterns 
Initial settings  Lamp Power  Floor 
Floor-rear 
Ceiling 
Ceiling-rear 
 
Normal 
Anamorphic 
Letterbox 
Panoramic 
Subtitles
Pixel to Pixel
User 1
User 2
User 3
Horizontal
Vertical
Screen controlBrightness
Contrast
Sharpness
Sharpness Mode 
Brightness
Contrast
Color
Sharpness...

30
ht3000e
SETUPOrientation
Keystone
Projection Lens 
Lamp Power
Power On
Test patterns
Initial settingsFloor
Floor-rear
Ceiling
Ceiling-rear
Horizontal
Vertical
Auto
Stand-by
Language
Source list  
F1/F2 keys
Source info
OSD background
OSD Position
OSD Timeout
Zoom
Focus
Magnification
Blank
Color temperature
Gamma correctionYes    No
Italiano English
Français
Español Deusch
Português
Pycc
K
F1 F2
Active  Yes   No
Name
Cancel
Confirm
Edit source name
 ()?@
1  ABC
2  DEF
3
GHI 4  JKL
5 MNO
6
PQRS 7
-
+...