Sim2 Multimedia Ht300 Xtra Projector User Manual

19
XTRA
Phase
The phase adjustment determines the stability and sharpness
of the vertical lines in the projected image.
ADVANCED SETTINGS
Advanced colour settings are accessible via this menu.
We recommend the use of these settings only to the
experienced user, as their adjustment can seriously affect final
image quality.
2
COLOR TEMPERATURE
GAMMA CORRECTION
Y/C DELAY ADVANCED SETTINGS
VIDEO
COLOR TEMPERATURE
GAMMA CORRECTION ADVANCED SETTINGS
RGB-DVI
Colour temperature
Select the colour temperature of...

20
XTRA
Select  Pan (zoom button on the remote control) to choose
the area of image to enlarge, using all four arrow keys.
Via remote control, it is possible to alternate between modes,
by pressing the 
 key.
SETUP
The installation menu gives access to features that will allow
for correct installation of the projector.
ORIENTATIONKEYSTONE
PROJECTION LENS
TEST PATTERNS
FACTORY DEFAULTS SETUP
ORIENTATION
Select the option that best describes the installation i.e. desktop
front, ceiling front, desktop rear...

21
XTRA
0
-10 KEYSTONE
HORIZONTAL
VERTICAL
PROJECTION LENS
To adjust Focus and Size of the projected image, use the
lens settings.
FOCUS
ZOOM PROJECTION LENS
F1ZOOM
FOCUS
F2
ZOOM
ZOOM
ZOOM
ZOOM
FOCUS
FOCUS
FOCUS
ZOOM
FOCUS
C
-
S
Y
N
CD
V
I
Alternatively, press keys  Focus and  (Zoom) on your re-
mote control, or the key 
-Focus-Esc on keyboard pad.TEST PATTERNS
Displays a series of five test patterns, useful for the installation
of the projector.
Press Up and Down Arrow  keys to browse pattern.
FACTORY...

22
XTRA
LANGUAGE
Lists the languages options available for the On Screen Display
menus.
ENGLISH
ITALIANO
FRANCAIS LANGUAGE
DEUTSCH
ESPANOL
PORTOGUES
OSD POSITION
To position the On Screen Display within the picture area,  use
the arrow keys 
(Fig. 31a) or press the 1 to 9 keys on the remo-
te control 
(Fig. 31b).
 
Fig. 31a             Fig. 31b
OSD BACKGROUND
Gives a choice of backgrounds for the On Screen Display.
OSD TIMEOUT
Use this adjustment to set the display time after which the On
Screen Display...

23
XTRA
10   CLEANING AND MAINTENANCE
- Check the integrity of cables used to connect various
sources.
- If you are using the Remote Input Interface, do not to confuse
the menu for selection of projector’s inputs (Source
Selection), with the menu for selection of remote inputs
(Source Selection / RI2).Out of range
Either the resolution or the horizontal/vertical frequency of the
input signal is too high.
- Input a signal that is within specifications.
The projector does not require internal cleaning....

24
XTRA
Image is disturbed, unstable or noisy
- Verify compatibility of video/graphic signals with the technical
specifications of the  projector.
- Check the integrity of cables connecting projector to various
sources.
- If the signal source is a terrestrial broadcast (via a VCR) check
that the receiving channel has been correctly tuned in and
that the aerial system is in good working order.
- Should the problem be present with a signal coming from a
video-recorder, ensure that the videotape is an...

25
XTRA
You can purchase the following optional accessories at your
Dealer:
- Remote Input Interface with 10 m Cable.
- Wall/Ceiling Bracket Kit.
12   OPTIONAL ACCESSORIES
Use only original, or SIM2 Multimedia approved,
accessories.
CAUTION: for ceiling/wall installation, by means of
suspension bracket, carefully follow the instructions
and safety instructions recommended by the
Manufacturer in the bracket’s literature.
A   TECHNICAL SPECIFICATIONS
ELECTRICAL
Input Signals:CVBS on RCA/Phono type...

26
XTRA
Low Voltage Power Output:two 12 Vdc output, 100 mA max on
jack connectors
GENERAL
Supply: from 100 to 240 Vac, -10% +6%
tolerance
Frequency: from 48 to 62 Hz
Consumption: 180 W max
Fuse: T 3.15A H, 5 x 20 mm
Dimensions of projector:352 mm x 174 mm x 318 mm
(LxHxD)
13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
Weight of projector: 5.0 kg (11 lbs)
Packaging and400 mm x 275 mm x 405 mm
(LxHxD)
gross weight: 1’ 4” x 11” x 1’ 4” (LxHxD)
double reinforced carton;
expandable anti-shock
packaging;gross weight,...

27
XTRA
C   PROJECTION DISTANCES
Follow the table below to determine the optimal projection distance (between the screen and the center of the lens). This will help
you to obtain the desired screen size.
CC
CC
DPDP
Screen Screen
size width
  (diagonal)     min. DP   max CC           max. DP          max CC
Min projection distance
16/9
2,7 9’0”
3,3 10’9”
3,8 12’7”
4,4 14’4”
4,9 16’2”
5,5 17’11”
6,6 21’7”
8,2 26’11”
9,9 32’4”
11,0 35’11”
12,0 39’6”
13,7 44’11”1,1 44”
1,3 52”
1,6 61”
1,8 70”
2,0 78”
2,2...

28
XTRA
Screen Screen
size width
  (diagonal)     min. DP   max CC           max. DP          max CC
Min projection distance
4/3
3,4 11’0”
4,0 13’2”
4,7 15’7”
5,4 17’7”
6,0 19’9”
6,7 22’0”
8,0 26’5”
10,1 33’0”
12,1 39’7”
13,4 44’0”
--
--1,0 40”
1,2 48”
1,4 56”
1,6 64”
1,8 72”
2,0 80”
2,4 96”
3,1 120”
3,7 144”
4,1 160”
4,5 166”
5,1 200” m in. m      ft. in.m      ft. in.
0,3 1’ 1”
0,4  1’ 4”
0,5 1’ 7”
0,5 1’ 10”
0,6 2’ 0”
0,7 2’ 3”
0,8 2’ 8”
1,0 3’ 4”
1,2 4’ 1”
1,4 4’ 6”
1,5 4’ 11”
1,7 5’ 8”m      ft....