Sim2 Multimedia Ht300 E Link Projector User Manual

1
User and Installation ManualThe home theater projector
HT300 E-LINK
  cod.46.0421.000 

����������

LIGHT
F1
ZOOM
FOCUS
F2
Activates test pattern MENU -
Activates  the On Screen Display menus.
Navigates menu pages.
FREEZE
Freezes a moving picture. STAND-BY
Switches off to stand-by.
0-9 Keys
Switch  on  from  stand-by
and  allow  direct  source
selection.
ESCAPE
Deactivates the On  Screen Display.
MENU +
Activates  the On Screen Display menus.
Navigates menu pages.
MEMORIES
Activates  Memories menu
INFO
Displays the selected  source information 
and the  projector status.
VCR
Improves the...

3

1  INTRODUCTION
Congratulations on your choice of the SIM2 Grand Cinema HT300 E-LINK system!
12
DIGIOPT
IC ™
LI NK    
CLASS 1  A LASER PRODUCT3-ONDIGIOPT
IC
 ™ 
IMA GE
 PR
OC
ESSORO
FF
300 E-LINK  

4
����������

All image adjustments can be performed with the remote con-
trol with the aid of the On Screen Display; alternatively, the unit 
can be controlled by from a home automation system through 
the serial port.
The Projector produces an image using the very latest Texas 
Instruments  DLP™  technology  (1280x720  pixel  DMD™HD2+ 
panel),  a  proprietary  dust-sealed  optical  system,  a  new  six-
segment colour wheel.
The  two  units  are  connected  via  a  three-core  fibre  optic  ca
-
ble...

5
����������

Prior to switching on the projector please read 
each  chapter  of  this  manual  carefully  as  this 
manual provides basic instructions for using the 
projector.The  installation  of  the  lamp  assem
-
bly,  preliminary  adjustments  and  procedures 
that necessitate the removal of the top cover, 
must  be  carried  out  by  authorised,  trained  te
-
chnicians. There are no user serviceable parts 
inside. To ensure safe and long term reliability 
please  use  power  cables  supplied...

6
����������

121113
15
10
14
12
CLASS 1 LASER PRODUCT
3-
64
123958
7
12DIG IOPT
IC “LINK     
CLASS 1
 LASER  PRODUCT
3-

1  Projection lens 
2   Lens shift knob
3   Cooling air inlet vents
4   Remote control IR sensor
5   Cooling air outlet vents
6   Adjustable carry-handle
7   Adjustable levelling feet
8   Ceiling/wall bracket fixing holes 9  Fiber Optic cable connections
10  Main power switch
11  Remote control rear IR sensor
12  Green LED
13  Red LED
14  Rear keyboard pad
15  Fused power socket...

7
����������

•  Read this manual carefully and keep it in a safe 
place for future consultation.
  This manual contains important information on how to install  and  use  this  equipment  correctly.  Before  using  the  equip
-
ment, read the safety prescriptions and instructions carefully. 
Keep the manual for future consultation.
•   Do not touch internal parts of the units.
  The units contain electrical parts carrying high voltages and  operating  at  high  temperatures.  Do  not  remove  the...

8
����������

of electrical storms or when the system will remain unused 
for prolonged periods. 
•   Avoid  contact  with  liquids  and  exposure  to  hu
-
midity. 
  Do not use the units near water (sinks, tanks, etc.); do not  place objects containing liquids on top of or near the units 
and  do  not  expose  them  to  rain,  humidity,  dripping  water 
or spray; do not use water or liquid detergents to clean the 
units.
•   Prevent the units from overheating.
  Do not obstruct ventilation openings....

9
����������

The carton should contain the following:
-  the projector
-   the DigiOptic™ Image Processor  
-  the remote control
-  four 1.5V AAA batteries (for remote control)
-  DigiOptic™ Image Processor power supply unit
-  three power cables for the projector (EU, UK, USA) 
-  three  power  cables  for  the  DigiOptic™  Image  Pro
-
cessor (EU, UK, USA) 
-  triple fiber optic cable for linking DigiOptic™ Image  Processor and the projector
-  one cable HDMI™-HDMI™
-  one cable HDMI™-DVI 
-   two...

10
����������

CAUTION: In  the  case  of  ceiling  or  wall  mounting  using  a 
suspension bracket, follow the instructions carefully and comply 
with the safety standards you will find in the box together with 
the bracket. If you use a bracket different to the one supplied 
by SIM2 Multimedia, you must make sure that the projector is at 
least 65 mm (2-9/16 inch) from the ceiling and that the bracket 
is not obstructing the air vents on the lid and on the bottom of 
the projector.
Position the...