Sim2 Multimedia Domino 30 Projector User Manual

11
between 15-80 kHz and a Vertical frequency of between 40-
100 Hz. Computer Resolutions of VGA, SVGA, XGA, SXGA and
UXGA can be displayed.
C-SYNC
Fig. 18
This input is suitable for a RGB video signal, or for a Component
(YCrCb) type, with composite synchronisation on the green
signal (RGsB) or on the luminance (Y) signal (YsCrCb) through
a cable with RCA/Phono type connector 
(Fig. 19).
Only horizontal scanning frequencies of 15 kHz (standard vi-
deo resolution) or 32 kHz (high definition video, with...

12
Only horizontal scanning frequencies of 15 kHz (standard vi-
deo resolution) or 32 kHz (high definition video, with progressi-
ve scanning) can be applied to this input.
MOTORISED PROJECTION SCREEN OUTPUT
Fig. 20
The projector is equipped with one output (Voltage: 12 Vdc) for
motorised projection screen and screen. This 12V output should
be connected to the appropriate screen interface provided by
the screen manufacturer 
(Fig. 20).
The +12V output is activated when the projector is switched on
(green...

13
7   KEYBOARD PAD
8   REMOTE CONTROL
Insert the batteries, taking care to match the polarity, as
indicated in the battery recess of the remote 
(Fig. 22).
                 
+
- +
- + -
+ -
four 1.5V
AAA alkaline
batteries
Change the batteries in the remote control if experiencing
difficulty in sending commands to the projector.
If the remote control is not to be used for a long period of time
remove the batteries. Replace all batteries at the same time;
do not replace one new battery with a used...

14
9   ON SCREEN MENUS
The main menu is divided into four sections to cover various
adjustments in a practical and logical manner.
The on-screen menu layout is dependant upon the chosen input
signal so various options may not be applicable, i.e. some typical
adjustments to the video signal are not applicable to the graphic
RGB signals from PC and viceversa.
PICTURE
This menu features adjustments relating to the projected image
quality.
BRIGHTNESS
CONTRAST
COLOR
SHARPNESSFILTER20
50
50
7
6
CINEMA MODEOff...

15
BRIGHTNESS
CONTRAST50
20 PICTURE
SHARPNESS 5
SHARPNESS MODEVideoGraphics
BRIGHTNESS
Use this control to adjust the image’s black level.
COLOR
Use this control to adjust the colour level.
TINT
Controls the purity of the colours, to NTSC coded signal
standards. Tint is only applicable to video input with NTSC stan-
dard, to RGB 15kHz and YCrCb 15kHz inputs and YCrCb 32kHz
(no RI2).
SHARPNESS
Use this adjustment to increase and decrease the level of
picture detail.SHARPNESS MODE
It allows to select the...

16
IMAGE ADJUSTMENTS
This menu features adjustments relating to position, aspect ratio
and magnification etc.
POSITION
ASPECT
ADVANCED SETTINGS
MAGNIFICATION IMAGE ADJUSTMENTS
VIDEO
POSITIONASPECT
FREQUENCY/PHASE
ADVANCED SETTINGS
MAGNIFICATION IMAGE ADJUSTMENTS
RGB
POSITION
Use this adjustment to position the image vertically and
horizontally.
HORIZONTAL: 9
VERTICAL:   6
ASPECT
Determines the aspect ratio of the projected image.
From this menu it is possible to select the aspect ratio by using
the...

17
User 1, 2, 3
Should you wish to use a format different to those preset, go to
User menus.
ASPECT / USER 1
HORIZONTAL
VERTICAL
SCREEN CONTROL0
-10
OnOff
By using the Horizontal and Vertical adjustments it is
possible to select the screen shape of your choice. It is
important to keep the relation between height and width so
that the correct aspect ratio can be maintained.
FREQUENCY / PHASE
In the case of RGB graphic signals this adjustment is used for
synchronization of the RGB image to the number of...

18
K), Low (circa 5000 degrees K).
The User option will allow you to select the colour temperatu-
re of your choice.
BLU28
0-16
COLOR TEMP. /USER
RED
GREEN
Gamma correction
Selects the Gamma’s correction curve. It determines the
projector’s response to the grey scale, emphasizing - more or
less - the different grades of brightness (blacks, dark, medium,
light greys, whites) in the projected image.
VIDEO FILM
GRAPHICS GAMMA CORRECTION
Y / C Delay
Use this adjustment in the event of horizontal colour...

19
ORIENTATION
Select the option that best describes the installation i.e. desktop
front, ceiling front, desktop rear and ceiling rear.
FLOOR
CEILING
FLOOR-REAR
CEILING-REAR
ORIENTATION
HORIZONTAL / VERTICAL KEYSTONE
To obtain maximum quality of the projected image, we
recommend the installation of the projector on a level platform
parallel and central to the screen. In the event that the picture
is not correctly positioned use the lens shift feature 
(Fig. 26).
 
C-S
YNC
Fig. 26
Should it not be...

20
Press Up and Down Arrow  keys to browse pattern.
FACTORY DEFAULTS
Reconfigures the projector to original factory settings except
Position, Orientation, Y/C Delay, Zoom and Focus.
NoConfirm?
Ye s
MENU
This menu covers the On Screen Display adjustments.
LANGUAGE
OSD POSITION 
OSD BACKGROUND15 sec MENU
OSD TIMEOUTClearSolid
LANGUAGE
Lists the languages options available for the On Screen Display
menus.
ENGLISH
ITALIANO
FRANCAIS LANGUAGE
DEUTSCH
ESPANOL
PORTOGUES
OSD POSITION
To position the On Screen...